Coated Seed Dryer Machine

1. Product Description

The BYH-5 Coated seed dryer is a new type of seed processing equipment, which is suitable for drying and processing after coating. It can effectively improve the rapid film-forming and curing of seed coating agent, reduce seed adhesion and agglomeration, and make the coated seeds be weighed, packaged, stored and transported immediately.

2. Feature

The equipment has the following characteristics:

1. The drying temperature is controllable and adjustable, safe, reliable and highly automatic;

2. The inclination angle of the two rollers can be adjusted to meet the needs of different varieties, humidity and productivity after coating;

3. The whole machine adopts totally enclosed structure, and exhausts harmful hot and humid air to the outside, which can effectively prevent the overflow of harmful gas in the processing workshop;

4. All parts contacting with wet materials after coating shall be made of corrosion-resistant stainless steel, safe and durable;

5. The air volume regulating valve is set at the air outlet, which can adjust the hot air volume according to the specific gravity, humidity and productivity of materials.

3. Technical Parameter

4. Basic structure and working principle

BYH-5 seed coating dryer is mainly composed of material feeding device, drying roller, hot air mixing chamber, combustion chamber, oil fired hot air stove, regulating device, frame and control system (Figure 1).

When the equipment works, first start the hot air control system, at the same time start the fan connected with the exhaust pipe, and then start the oil fired hot air stove to form the working hot air flow; then start the roller, the newly coated or pelleted seeds enter the upper and lower rolling fences in series through the feeding device, and the feeding amount can be manually adjusted; the materials entering the roller are brought up and slid down by the plate to form a uniform powder curtain, and the reverse Fully contact with the hot air, and gradually move to the low end of the drum; through the long-distance hot air drying of the upper and lower rollers, enter the discharge device and flow out, and the discharged materials can be truly measured, packaged and stored.

A temperature sensor is arranged at the discharge end of the lower roller to automatically control the fire power of the oil fired hot blast stove.

1. Rack; 2. Lower drum; 3. Lower drum regulating device; 4. Discharging device; 5. Air distribution network; 6. Hot air mixing chamber; 7. Combustion chamber; 8. Oil fired hot blast stove; 9. Arch air duct; 10. Feeding