304L Stainless Steel Casing Pipe with Machined Beveled Ends and Custom Welding

Product Specification

304L Stainless Steel Casing Pipe with Custom Welding Coupling – OD 325 mm

Product Information

You know the drill: casing pipes show up with plain cut ends. Then your crew spends hours cutting bevels, grinding, and hoping the fit-up with the coupling will be good enough for a clean weld. It’s slow, it’s messy, and it eats into your schedule.

This product takes that headache off your plate.

You get a heavy-duty 325 mm outer diameter casing pipe made from 304L stainless steel – the low-carbon grade that won’t weaken at the weld zone. And because we listen to what you actually need, every pipe comes with the welding bevel already machined on both ends. No cutting, no grinding on site. Just pull it out, line it up, and start welding.

We also include a custom-made welding coupling, built exactly to your specs. You tell us the material, diameter, wall thickness, and thread or slip-on type, and we make it. Pipe and coupling arrive together, ready for fit-up. You save a full step – and a whole lot of stress.

Characteristics – Designed Around Your Real Problems

• Beveled ends
  Site cutting and beveling is slow, loud, and rarely perfect. Our factory-machined bevel gives you a uniform, accurate weld prep on every single pipe. Your welders will love the fit.

• Custom coupling that actually matches.
  Nobody likes a coupling that almost fits. Ours is made specifically for your casing pipe, with the exact ID, OD, and bevel geometry you need. Set it in place, tack it, weld it – done.

• 304L: welds clean, stays strong.
  That “L” means low carbon. In plain language, the pipe is much less likely to crack or rust right next to the weld, even in wet or corrosive ground. The joint stays as strong as the rest of the pipe.

• Rust isn’t your problem anymore.
  304L stainless steel naturally fights off moisture, salts, and chemicals. Buried, submerged, or splashed – it won’t flake or rust through. You install it and move on to the next job.

• Almost zero maintenance.
  No paint to redo, no coatings to check, no rust scale to scrape. The pipe’s surface stays clean inside and out, which also helps keep your water or product stream pure.

Applications – Where This Casing Solves Real Problems

• Water wells and monitoring wells – No rust, no contaminants, safe for drinking water right from the start.

• Geothermal systems – Takes heat, cold, and damp soil year after year without complaining.

• Marine and coastal work – Saltwater and humidity beat up normal steel fast. 304L doesn’t care.

• Oil & gas protective casing – Protects the inner pipe in corrosive ground, and the weld joints hold tight.

• Food, beverage, and pharma lines – Hygienic, easy to clean, meets the strictest standards.

• Structural casings and piling – Strong enough to carry the load, good-looking enough to leave exposed.

Specifications

Below is a starting point. Need a different wall thickness, length, or coupling design? Just reach out – we build to your requirements.

Company Introduction – We Make Casing Simple

We’re Oasis Well Screen Co., Ltd. With 15 years in the water and oil well filtration industry, our technical team understands that every project has its own challenges. Instead of pushing a one-size-fits-all product, we listen to your conditions and recommend the most suitable casing and coupling solution for your specific job. That’s why we focus on delivering stainless steel casing pipes that are genuinely job-ready: 304L material, beveled ends, and a coupling that actually fits.

FAQ 

1. What is the difference between 304 and 304L stainless steel casing pipe?

The key difference is the carbon content. 304L has less carbon than standard 304, which makes it much better for welding. When you weld regular 304, the heat can cause carbon to gather at the grain boundaries, making the area next to the weld weak and easy to rust. With 304L stainless steel, that risk is almost completely gone. Your casing stays strong right at the joint, even in wet or corrosive ground. That's why we supply our casing pipes with factory-machined beveled ends in 304L — so you get clean welds that last.

2. Will stainless steel casing rust over time if buried underground?

Not with the right grade. Normal steel will flake and pit after a few years in damp soil, but 304L naturally resists corrosion from moisture, salts, and mild chemicals. That means no rust scale contaminating your water, no thinning pipe walls, and no expensive dig-ups to replace failed casing. Combined with a custom welding coupling that fits perfectly and welds clean, you get a complete system that stays trouble-free for decades.

3. How do I know which wall thickness or coupling type to choose for my project?

You don't need to figure it out alone. With 15 years in the water and oil well filtration industry, our technical team knows what works in different ground conditions and project types. Tell us what you're drilling — water well, monitoring well, geothermal loop, oil & gas protective casing — and we'll recommend the right wall thickness and coupling design for your situation. You get a solution that actually fits your job, not just a pipe off the shelf.

Related Products