Automatic Vertical Grinding Machine Practical Corrosion Resistant Z860

Product Specification

Vertical Grinding Machine Z860 Machine description
 
 
Machine description:
 
1. The machine is a gantry structure, composed of double columns, beams and bed to form a closed rigid frame structure. A transverse drag plate is       arranged on the beam, and a vertical grinding head is respectively installed on the transverse drag plate.
 
2. The diamond roller trimmer is installed at one end of the table and is used to trim the side and bottom surfaces respectively.
 
3. The machine tool is controlled by the German Siemens or Japan FANUC system, which automatically controls the vertical and transverse feed of      the grinding head, the hydraulic drive of the workbench, and the hand-held electric hand wheel.
 
4. Cooling filter system: During grinding and grinding wheel dressing, the workpiece is cooled and the grinding wheel is washed. Filter using                 magnetic separator, paper filter and natural settlement three filtration.
 
5. The coolant flow rate is 600L.
 
6.  Equipped with automatic quantitative centralized lubrication system, lubricate the guide rail and screw of each feed shaft, with automatic           lubrication mode.
 
7.  The machine tool is fully enclosed (the working area and the back half of the machine tool are fully enclosed, the front-end operation position and the loading position), which is easy to clean and maintain.
 
Device description:
 
1. The body and components are cast by Milhanna high grade cast iron FC30, which is artificially normalized heat treatment and then treated by natural aging. Components are processed by YASDA, MITSUI SEIKI, TOSHIBA, ELB and other world-class equipment once clamping processing. Precision size can be up to micron level, to ensure high precision equipment basic components.
 
 
2. Machine guide rails and precision ball screws are continuously lubricated by automatic lubrication system to ensure longer service life and accuracy. The cooling system is separated from the body to eliminate vibration and favorable heat dissipation.
 
3.Equipped with Siemens 828D CNC automatic grinding system, and secondary development, man-machine dialogue fool operation, with many optional equipment to choose from, including inner hole grinding device, automatic end measuring device, automatic outside diameter measuring device, etc.
 
4. The grinding feed system is composed of a V and a flat track of hand-crafted precision shovel, with automatic lubrication system and C3 level precision grinding ball screw, which can achieve smooth movement, excellent repeated positioning accuracy and long track life.
 
5. The standard configuration of the grinding wheel spindle is rear four and rear two bearing structure. High precision dynamic and static pressure spindle can also be selected, which has the characteristics of high rotation precision, high dynamic stiffness, good vibration resistance, high grinding efficiency and good grinding surface quality. For special work-piece grinding, the grinding wheel speed can be adjusted, up to 3500 RPM and 60m/s.

 
6. The tail seat is designed to be both rigid and robust. A hardened alloy steel sliding cylinder encrusted in the cast iron body is designed to carry the MT4 top core. The jacking force of the sliding cylinder can be easily changed by adjustment knobs at the rear. Special accessories oil pressure tail seat with a pedal to facilitate unloading work parts.
 
7.Siemens numerical control system as the standard configuration, after secondary development, all Chinese operation interface, easy to use. Equipped with Siemens high performance servo motor, the equipment CNC system and drive system have better compatibility, at the same time with automatic sand repair and automatic compensation function, to ensure the stability and precision of feed and grinding.
 
Technical specification: