Dry processe electrode Research 2 Servo motor Battery Electrode Calendering Roll

It is mainly suitable for the electric rolling of battery materials in the laboratory, a small amount of precious metal materials such as gold and silver, and non-ferrous materials such as copper and aluminum at a certain thermal temperature. The battery roll press thickness is adjustable and the operation is simple. It is particularly suitable for thinning and increasing the density of lithium battery plates, a clean energy material.

Features:

• Heating and rolling, the upper and lower rolls are heated separately in sections. The temperature is adjustable by a temperature controller and displayed digitally.
• It can be operated with or without heating.
• The rolls have high hardness and are treated with hard chromium plating on the surface, with a hardness of up to HRC62 and anti-rust.
• The tabletting gap is adjusted by using inclined blocks, which has good self-locking performance and high adjustment accuracy.
• The rolling accuracy is high, and the cylindricity of the rollers is ≤±2um.
• Vertical design, facilitating the feeding and rolling of sheet and strip materials.  
• The roller pressing is achieved through gear meshing rotation.
• The thickness and speed of the tablet pressing can be adjusted, and the appearance is exquisite and beautiful.
• Electric rolling, forming automation, can be operated in both forward and reverse directions.
• It is small in size, easy to operate and flexible and quick to use.
• The two motors operate independently to achieve independent adjustment of the rotational speed of the two rollers.

 

 

 

Maintenance methods and precautions

 

1.Before each work session, carefully wipe the surfaces of the two rolls with a soft cloth dampened in alcohol to keep them clean.

2. Lubricate the moving parts of the gears with oil to ensure smooth movement.

3. Do not use air pumps for purging to prevent dust from entering the bearings and affecting the usage accuracy.

4. If the roller is not used for a long time, wipe the surface clean and spray anti-rust oil on it to protect the roller surface from erosion.

5. Regularly inspect the screws, nuts, pins and other fasteners of all parts of the machine to prevent loosening and eliminate machine quality accidents and personal accidents.

 

When adjusting the rolling gap, the small hands on both sides should be adjusted evenly to avoid damaging other parts. After adjustment, the dial indicator can be removed to prevent accidental damage during production and use.