Zhangjiagang Guangda Special Material Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T |
| Supply Ability | 500000 ton/year |
| Delivery Time | 15-45 work days |
| Material | AISI 4150 Steel |
| Heat treatment | Annealing,Normalizing,Tempering ,QT etc . |
| Standard | AISI |
| Shape | Round, flat, hexagonal, block, shaft etc |
| Surface | Black, Turned , Rough turnned ,premachined,Polish |
| Length | Max 10000mm (10m) |
| Diameter | φ150-1500mm |
| Trade Mark | GD |
| Brand Name | Guangda |
| Certification | DNV, BV, Rina, ISO, GL, ABS, LR ,CCS ,PED |
| Place of Origin | Jiangsu China |
View Detail Information
Explore similar products
Forged Steel Flat Bar 18CrNiMo7-6 High Performance Alloy Steel Gear Steel
Guangda Forged Square Bar C15 C35 C45 C60 S355J2G3 25CrMo4 42CrMo4
C40 1.0511 forged round bar carbon steel round bar C40 steel bar C40 steel
1.0528 C30 Forged Round Bar Carbon Steel Round Bar Diameter φ150-1500mm
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T | Supply Ability | 500000 ton/year |
| Delivery Time | 15-45 work days | Material | AISI 4150 Steel |
| Heat treatment | Annealing,Normalizing,Tempering ,QT etc . | Standard | AISI |
| Shape | Round, flat, hexagonal, block, shaft etc | Surface | Black, Turned , Rough turnned ,premachined,Polish |
| Length | Max 10000mm (10m) | Diameter | φ150-1500mm |
| Trade Mark | GD | Brand Name | Guangda |
| Certification | DNV, BV, Rina, ISO, GL, ABS, LR ,CCS ,PED | Place of Origin | Jiangsu China |
| High Light | AISI 4150 Steel Forged Round Bar ，50CrMo4 Forged Round Bar ，Forged Round Bar Turned | ||
SAE4150 | AISI 4150 Steel | 50CrMo4 | DIN 1.7228 Alloy Steel Forged Round Bar Alloy Steel Bar
AISI 4150 steel is a high-strength alloy structural steel, which has a higher carbon content than AISI 4140 steel in the Cr-Mo series medium carbon alloy steel.
AISI 4150 steel has high strength and toughness, good hardenability, and no obvious temper brittleness, but has white spot sensitivity during hot working.After normalizing or quenching and tempering, the machinability is good, but the plasticity is low during cold deformation, and the corresponding welding performance is poor.
AISI 4150 steel is suitable for forgings with higher strength or larger section than AISI 4140 steel, such as manufacturing large and medium-sized plastic molds that require certain strength and toughness.
Forged Round Bar AISI 4150 1.7288 Product features
| Material | AISI 4150 1.7288 |
| Type | Forged bar ,round ,square, flat, block, shaft etc. |
| Diameter | φ150-1500mm |
| Length | Max 10000mm (10m) |
| Surface | Black, peeled, polishing, bright, sand blast, hair line, etc. |
| Application | Heavy machinery axle,turbine shaft blade, high load of transmission parts, fasteners, crank shafts, gears, as well as heavily loaded parts for motor construction etc. |
| Tensile strength test | DIN EN ISO 6892-1 |
| Impact test | DIN EN ISO 148-1 |
| UT | DIN EN10228 Quality-Class 3 C/c or D/d |
| Grain size | ASTM E112 / EN ISO 643 |
| Applicable standard | EN10250,EN10083,SEW550 etc |
| Certificate | EN 10204 / 3.1 3.2 |
Forged Round Bar Forged Round Bar AISI 4150 1.7288 Chemical Compostion
| Grade | C | Si | Mn | P | S | Cr | Mo |
| 4150 | 0.48-0.53 | 0.15-0.35 | 0.75-1.0 | ≤0.035 | ≤0.04 | 0.8-1.1 | 0.15-0.25 |
| 50CrMo4/1.7228 | 0.46-0.54 | ≤0.4 | 0.5-0.8 | ≤0.035 | ≤0.035 | 0.9-1.2 | 0.15-0.30 |
Forged Round Bar AISI 4150 1.7288 Mechanical properties
| Tensile Strength | Yield Strength | Elongation | Reduction of Area | Impact Charpy-V | Hardness | |
| Normalizing | 1115Mpa | 735Mpa | 11.7% | 31% | 12 | 321HBW |
| Annealing | 730Mpa | 380Mpa | 20.2% | 40% | 25 | 197HBW |
Forged Round Bar AISI 4150 1.7288 Forging
Initial Forging Temperature:1200℃
Final Forging Temperature:800℃
Forging Ratio:above 4:1
Post-Forging Treatment: AISI 4150 Steel should be cooled as slowly as possible in sand after forged.As a white point sensitive steel,the recommended practice is to do hydrogen elimination heat treatment immediately after forging.
Forged Round Bar AISI 4150 1.7288 Application
SAE 4150 has good machinability and hence it is used to make nuts, bolts, gears, shafts, arms, rollers, crankshafts, etc. SAE 4150 is used in the automobile industry, aviation industry, automotive industry, oil and gas industry, etc.
- Shafts
- Aircraft Parts
- Drill Collars
- Bolts
- Couplings
- Valves
- Sprockets
- Axles
- Forged Gears
About Guangda For forged round bar
AISI 4150
4150 round bar
50CrMo4
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
0.4 billion-0.6 billion
Employee Number:
1800~2500
Ecer Certification：
Site Member
Zhangjiagang Guangda Special Material Co.,Ltd was established in 2003. We located in Jiangsu Province beside Shanghai. Act as the high-tech enterprises with high-quality special alloy materials as the core business belong to the "advanced iron and steel materials" industry under the ... Zhangjiagang Guangda Special Material Co.,Ltd was established in 2003. We located in Jiangsu Province beside Shanghai. Act as the high-tech enterprises with high-quality special alloy materials as the core business belong to the "advanced iron and steel materials" industry under the ...
Get in touch with us
Leave a Message, we will call you back quickly!