Wuxi Guanglu Special Steel Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 500 tons per month |
| Delivery Time | 15 days after receipt 30% of value |
| Packaging Details | seaworthy |
| Martensitic grade | AISI 420, UNS S42000 stainless steel |
| Product form | AISI 420 Cold rolled Stainless Steel Strip Coil |
| Size range | 0.1~3.0X5~1219mm |
| Delivery state | annealed |
| Surface | 2B |
| Edge | Cut, mill |
| Brand Name | Tisco |
| Model Number | AISI 420, UNS S42000 |
| Certification | SGS |
| Place of Origin | China |
View Detail Information
Explore similar products
DIN X20CrMo13KG Stainless Cold Rolled Steel Strip In Coil EN 1.4120 / BOEHLER
EN 1.4021 DIN X20Cr13 Hot Rolled Stainless Steel Sheets And Plates
440C Plates JIS SUS440C Stainless Steel Sheets And Plates 1.4125
EN 1.4021 DIN X20Cr13 Hot Rolled Stainless Steel Plates AISI 420 Stainless
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 500 tons per month |
| Delivery Time | 15 days after receipt 30% of value | Packaging Details | seaworthy |
| Martensitic grade | AISI 420, UNS S42000 stainless steel | Product form | AISI 420 Cold rolled Stainless Steel Strip Coil |
| Size range | 0.1~3.0X5~1219mm | Delivery state | annealed |
| Surface | 2B | Edge | Cut, mill |
| Brand Name | Tisco | Model Number | AISI 420, UNS S42000 |
| Certification | SGS | Place of Origin | China |
| High Light | UNS S42000 cold rolled steel strip ，AISI 420 cold rolled steel strip ，UNS S42000 stainless steel strip roll | ||
AISI 420 UNS S42000 Stainless Cold Rolled Steel Strip In Coil
Martensitic stainless steels are essentially alloys of chromium and sufficient carbon content
that transform into martensite, a distorted body-centered cubic crystal structure, after hardening.
They are magnetic, and are formulated to respond well to heat treatment.
Similar to non-stainless hardenable steels, the maximum attainable hardness, and strength,
is in direct proportion to the amount of carbon present in the alloy.
However, the chromium present in the alloy allows for maximum hardness to be reached in
all but the thickest sections by austenitizing and quenching in air (air-hardening).
Corrosion resistance in mild atmospheric environments is excellent; many times better
than mild steel; however common martensitic stainless steels are not as corrosion-free as highly
alloyed austenitic stainless grades such as 316L in harsh environments.
Martensitic stainless steels are specified when the application requires good tensile strength,
creep, and fatigue strength properties, in combination with moderate corrosion resistance and
heat resistance up to approx. 1200 °F.
Typical (historical) uses of this grade include cutlery, turbine engines, petrochemical equipment,
surgical and dental instruments, scissors, valves, gears, cams and ball bearings.
Depending on the carbon content, martensitic alloys can be capable of tensile strengths approaching
300 ksi (2000 Mpa).
The most common, type 410, can be hardened to approximately 200 ksi (1400 Mpa) in an as quenched-state.
However, a tempering operation is usually performed to increase ductility and reduce brittleness.
Martensitic stainless steels are readily available in coil, sheet, strip, plate, wire and bar forms.
AISI 420 - UNS S42000:
AISI Type 420 is a martensitic stainless steel that provides increased strength and hardness
relative to Type 410, with moderate corrosion resistance. It is magnetic in both the annealed
and hardened conditions.
Maximum corrosion resistance is attained in the fully hardened or fully hardened and stress
relieved condition.
High carbon content results in the formation of chromium carbide compounds, providing excellent
wear resistance and edge retention when hardened.
| Grade | C | Cr |
| AISI 420A ( EN 1.4021, DIN X20Cr13 ) JIS SUS420J1 | 0.16~0.25 | 12.00~14.00 |
| AISI 420B ( EN 1.4028, DIN X30Cr13 ) JIS SUS420J2 | 0.26~0.35 | 12.00~14.00 |
| AISI 420X ( EN 1.4031, DIN X39Cr13 ) | 0.36~0.42 | 12.50~14.50 |
| AISI 420C, 420HC ( EN 1.4034, DIN X46Cr13 ) | 0.43~0.50 | 12.50~14.50 |
| AISI 420D ( EN 1.4037, DIN X65Cr13 ) | 0.58~0.70 | 12.50~14.50 |
For Details, please Contact
WUXI GUANGLU Special Steel Co., Ltd.
Stainless martensitic • precipitation hardening steel • stainless ferritic — Our answer to your needs
Tel: +86 510 81812873
Email: export@guanglusteel.com
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2012
Employee Number:
10~20
Ecer Certification：
Verified Supplier
Wuxi Guanglu special steel ( ISO 9001 certified company ) is a reliable supplier of high performance stainless materials and specialty alloys. With the passion for stainless alloys, we are inspired, keeping moving forward. For over ten years, we have ... Wuxi Guanglu special steel ( ISO 9001 certified company ) is a reliable supplier of high performance stainless materials and specialty alloys. With the passion for stainless alloys, we are inspired, keeping moving forward. For over ten years, we have ...
Get in touch with us
Leave a Message, we will call you back quickly!