P615Z-RC2 Cooled Infrared Thermal AD Module 640×512/15μm

Product Description:

P615Z-RC2 is one of the P series cooled AD modules developed by Guide Infrared. It consists of a cooled MWIR 640×512/15μm infrared detector and AD board that controls detector timing and bias, and converts detector analog signal into digital signal. 

The P615Z-RC2 cooled AD module provides power and control timing to drive the normal operation of the cooling infrared detector, and converts the analog output signal of the cooling infrared detector into a digital video stream output. Equipped with high performance signal processing circuit and standard cameralink interface that could output 16 bits raw data.

Main Features:

Accelerate development speed
• With high-performance signal processing circuits
• Digitization of detector drive and analog signal

Easy to develop & integrate
• Cameralink interface output 16bit raw data, serial port control
• Integrated structural design that has consistent dimension with detector

Technical Parameters:

Applications:

Support and Services:

Our infrared detectors and thermal imaging modules are designed to provide high-quality thermal imaging solutions for a wide range of applications. We offer a range of technical support and services to help you get the most out of your product, including:

· Product training and education
· Technical troubleshooting and support
· Repair and calibration services
· Customized solutions and consulting

Our team of experienced professionals is dedicated to providing you with the highest level of service and support possible. Contact us today to learn more about our product technical support and services.

FAQs:

Q: What is infrared thermal imaging technology?

A: Infrared thermal imaging uses photoelectric technology to detect specific infrared band signals of thermal radiation from objects, converts these signals into images and graphics that can be visually distinguished by humans, and further calculates temperature values.

Q: What is the wavelength range for infrared thermal imaging?

A: Infrared ray, also known as infrared radiation, is an electromagnetic wave in the infrared wavelength range between visible light and microwave. Thermal infrared imaging typically refers to mid infrared imaging at 3-5μm and far-infrared imaging at 8-12μm. In these bands, the focus is on heat sources, not visible light. The human eye is sensitive to the wavelength range of about 0.4~0.7μm and cannot see longer wavelengths of thermal energy. 

Q: What is the classification of infrared thermal imaging wavebands?

A: Generally speaking, infrared thermal imaging is divided into three bands: short wave, medium wave, and long wave.
Shortwave: wavelength range within 3μm;
Medium wave: wavelength range from 3μm to 5μm;
Long wave: wavelength range from 8μm to 14μm;

Q: What are the applications of infrared detectors and thermal imaging modules?

A: The infrared detectors and thermal imaging modules can be used in a variety of applications such as thermography, security & surveillance, intelligent industry, outdoor night vision observation, machine vision, smart driving, UAVs, and consumer infrared products.

Q: Does infrared thermal imaging emit radiation?

A: Infrared thermal imaging passively receives infrared signals emitted by objects and does not have radiation. As long as an object exceeds absolute zero, an infrared signal will be emitted, which is received by an infrared detector and then converted into a thermal image.