Foshan Huiju Decoration Material Co. Ltd.
| Warranty | 5 year |
| Material | Plaster, Gypsum, Pure Natural Gypsum |
| After-sale Service | Online Technical Support, Other |
| Surface | Paper |
| Project Solution Capability | total solution for projects, Cross Categories Consolidation, N/A |
| Application | Decoration, Bedroom, Mall, Villa, Warehouse, Hospital, Hotel, Supermarket, Sports Venues, partition system, Apartment, Home Office, Park, Office Building, Living Room, Workshop, School, Leisure Facilities, Kitchen, suspended ceiling, Hotel, Villa, Apartmen |
| Design Style | Modern |
| Feature | COMMON |
| Width (ft) X Length (ft) | 4X8 ft, 4x10ft, 4x12ft |
| Product Name | Gypsum Board |
| Color | green |
| Usage | Internal Wall Partition |
| Edge | Square or Tapered |
| Thickness | 9mm/9.5mm/12mm/12.5/15mm |
| Size | 1220mm*2440mm |
| Keyword | 12mm Gypsum Board |
| Raw Material | High Purity Gypsum Powder |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Customized 9.5Mm/10.5Mm/12Mm Standard Plaster Board Mould Resistance Interior
4x8' 15mm Standard Plaster Board , Gypsum Wall Board For Building Ceiling
1220x2440mm Gypsum Plaster Boards Reinforced 15mm Thick For Ceiling
Standard 4x8 Gypsum Board , 12.5 Mm Tapered Edge Plasterboard Damp Proof
Product Specification
| Warranty | 5 year | Material | Plaster, Gypsum, Pure Natural Gypsum |
| After-sale Service | Online Technical Support, Other | Surface | Paper |
| Project Solution Capability | total solution for projects, Cross Categories Consolidation, N/A | Application | Decoration, Bedroom, Mall, Villa, Warehouse, Hospital, Hotel, Supermarket, Sports Venues, partition system, Apartment, Home Office, Park, Office Building, Living Room, Workshop, School, Leisure Facilities, Kitchen, suspended ceiling, Hotel, Villa, Apartmen |
| Design Style | Modern | Feature | COMMON |
| Width (ft) X Length (ft) | 4X8 ft, 4x10ft, 4x12ft | Product Name | Gypsum Board |
| Color | green | Usage | Internal Wall Partition |
| Edge | Square or Tapered | Thickness | 9mm/9.5mm/12mm/12.5/15mm |
| Size | 1220mm*2440mm | Keyword | 12mm Gypsum Board |
| Raw Material | High Purity Gypsum Powder | Place of Origin | Guangdong, China |
| High Light | moisture resistant gypsum board ，gypsum board for wet areas ，cement board for wet areas | ||
Contractors and importers often compare moisture resistant gypsum board, cement board and tile backer board when they are choosing materials for bathrooms, kitchens, laundry rooms and other wet-area projects. The mistake is to treat these boards as the same product. They are not the same, and each one has a different role in the wall or ceiling system.
Moisture resistant gypsum board is useful for damp interior areas where standard drywall may not be suitable, such as bathroom ceilings, kitchen walls, laundry rooms and protected wall sections. Cement board and tile backer board are usually safer choices for heavier wet zones, direct shower walls and tile backing areas where water exposure and tile load are more demanding.
A wet-area project can fail when the board is technically good, but used in the wrong place.
In many interior projects, the buyer only asks for a “bathroom board” or “water resistant wall panel”. This is too vague. A bathroom ceiling, a dry-side bathroom partition, a tiled shower wall and a laundry room ceiling do not face the same level of water exposure. If one material is used for every area without checking the real condition, the project may face surface bubbling, weak joints, tile failure, repeated repair or customer complaints after installation.
Moisture resistant gypsum board is often the right choice for damp interior areas that need a smooth drywall finish. It is easier to cut and finish than cement board, and it works well for ceiling systems and protected wall areas where humidity is the main concern. However, it should not be treated as a heavy-duty waterproof tile backing board. When the wall will receive direct water spray, heavy tile, or continuous wet exposure, cement board or tile backer board is usually a more suitable material.
The professional way to choose is not to ask which board is “better” in general. The better question is: which area of the project is dry, damp, wet, tiled, exposed, ventilated or directly sprayed? Once the exposure level is clear, the material choice becomes easier and the risk of wrong purchasing is lower.
These three materials may appear in the same project, but they should not be used for the same job.
Best for humid interior areas that still need a gypsum board finish, such as bathroom ceilings, kitchen walls, laundry room partitions, garage interiors and protected damp-room wall sections. It is moisture resistant, not designed for long-term soaking.
Better for heavier wet-area construction, tile backing, shower walls and areas where water exposure is more direct. Cement board is usually harder, heavier and more difficult to cut, but it is more suitable for wet tile systems.
Used as a backing layer for tile installation. Depending on the material type, it may be selected for shower walls, tiled bathroom areas, wet rooms and other surfaces where tile adhesion and water exposure must be considered together.
This comparison helps buyers avoid using a board only because it is cheaper or easier to install.
| Comparison Point | Moisture Resistant Gypsum Board | Cement Board | Tile Backer Board |
|---|---|---|---|
| Main Purpose | Damp interior drywall, ceiling and protected wall areas | Wet-area wall systems and tile backing | Tile installation substrate in wet or semi-wet areas |
| Typical Use | Bathroom ceiling, kitchen wall, laundry room, garage interior | Shower wall, tiled bathroom wall, wet room backing | Behind ceramic tile, bathroom tile wall, wet-area tile system |
| Water Exposure | Humidity and occasional moisture, not continuous soaking | More suitable for direct wet conditions than gypsum board | Depends on material type and waterproofing system |
| Surface Finish | Joint compound, skim coat, paint, coating or light finishing | Usually used under tile or special wet-area finishing | Usually used as tile substrate |
| Installation | Easy to cut, fix and finish like standard drywall | Heavier and harder to cut, requires more labor | Installation method depends on board material and tile system |
| Cost Logic | Cost-effective for damp drywall and ceiling areas | Higher system cost but safer in heavier wet zones | Chosen when tile performance and substrate stability matter |
| Common Buyer Mistake | Using it as if it were fully waterproof | Using it everywhere even where lighter MR board is enough | Choosing without checking tile weight, waterproofing and exposure |
The right board depends on where it is installed, not only on the room name.
Moisture resistant gypsum board is often a practical choice because the ceiling faces steam and humidity, but usually does not receive direct standing water. Good ventilation and surface coating are still important.
Cement board or tile backer board is usually safer because this area may face direct water spray, tile load and higher waterproofing requirements. MR gypsum board should not be selected without system confirmation.
Moisture resistant gypsum board can be suitable where the wall or ceiling faces cooking vapor and cleaning moisture, but not continuous soaking. Surface finish and ventilation should match the actual use.
When MR gypsum board is the right material, buyers still need to confirm size, thickness, edge and packing.
| Item | Reference Specification | Buyer Note |
|---|---|---|
| Product Name | Moisture Resistant Gypsum Board / Green Plasterboard / MR Drywall Panel | For damp interior wall and ceiling applications. |
| Common Size | 1220×2440mm, 1220×2000mm, 1200×2400mm, 4×8 ft, or customized size | Confirm according to local framing and handling habits. |
| Thickness | 9mm, 9.5mm, 12mm, 12.5mm, 15mm | Ceiling and partition systems may need different thicknesses. |
| Core | Gypsum-based core with moisture-resistant formulation | More suitable for humid interiors than standard drywall. |
| Surface | Paper-faced flat surface, commonly green face paper | Used for identification, joint treatment and interior finishing. |
| Edge | Square edge or tapered edge | Tapered edge is often preferred for smooth joint finishing. |
| Application | Bathroom ceiling, kitchen wall, laundry room, garage, utility room | Not for direct soaking, exterior rain or heavy shower tile backing. |
| MOQ | Usually 1×20GP container | Depends on size, thickness, packing and loading plan. |
| Lead Time | Normally about 10–20 days after order confirmation | Final time depends on quantity and production schedule. |
Before comparing price, divide the project into exposure zones.
Is it a ceiling, partition wall, tile backing area, shower wall or service room?
Is the board facing humidity only, occasional moisture, or direct water spray?
Will the surface be painted, coated, skimmed, tiled or waterproofed?
Use MR gypsum board for damp drywall areas; consider cement board for heavier wet zones.
Most problems come from using a board outside its intended application.
Moisture resistant gypsum board is not fully waterproof. It is for damp indoor conditions, not for soaking, rain exposure or direct shower water without a proper system.
Cement board can be useful in wet tile systems, but it may be heavier, harder to cut and unnecessary for ceilings or protected damp interior areas where MR board is enough.
Paint, coating, waterproof membrane, adhesive, tile weight, ventilation and joint sealing affect the final result. The board alone does not decide the whole project performance.
To quote the correct material, the inquiry should explain the project area clearly. A vague request such as “bathroom board” is not enough because a bathroom ceiling and a shower tile wall may require different boards.
Example: We need moisture resistant gypsum board for bathroom ceilings and kitchen walls, size 1220×2440mm, thickness 12mm, tapered edge. Shower wall tile backing will use cement board. Please quote MR board for one 20GP container with pallet packing and loading quantity.
Not always. It can replace regular drywall in damp interior areas, but cement board is usually safer for direct wet tile areas, shower walls and heavier wet systems.
It is a good fit for bathroom ceilings, kitchen walls, laundry rooms, garage interiors and protected damp interior areas where a gypsum board finish is needed.
Cement board can be heavier, harder to cut and more labor-intensive. In damp but not directly wet ceiling or wall areas, moisture resistant gypsum board may be more practical.
Confirm the area, water exposure level, finishing method, size, thickness, edge type, quantity, packing and whether the project requires MR gypsum board, cement board or tile backer board.
Company Details
Business Type:
Manufacturer
Year Established:
1993
Total Annual:
20000000-60000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Located in Guangdong Province,Foshan Huiju Decoration Material Co.,Ltd. was established in 1993. It is a professional company that specializes in one stop solution for (Gypsum bord/cement board/WPC)ceiling and partition wall system. Our Brand is SUNHOUSE and mainly products:gypsum board, fiber cemen... Located in Guangdong Province,Foshan Huiju Decoration Material Co.,Ltd. was established in 1993. It is a professional company that specializes in one stop solution for (Gypsum bord/cement board/WPC)ceiling and partition wall system. Our Brand is SUNHOUSE and mainly products:gypsum board, fiber cemen...
Get in touch with us
Leave a Message, we will call you back quickly!