Haida Equipment Co., Ltd
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow |
| Supply Ability | 30 Sets per Month Haida |
| Delivery Time | 20 days after order confirmed |
| Packaging Details | ach set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Internal dimension | (W*D*H) 1000*800*1000mm |
| External dimension | (W*D*H) 1500*1180*1900mm |
| Test condition | 20±20C; 65% RH |
| Temperature range | -40~+150℃ |
| Temperature Accuracy | ±1℃ |
| Humidity range | 20~98%R.H. (Refer Image below) |
| Humidity accuracy | ±3%R.H |
| Cooling method | Air cooling |
| Brand Name | HAIDA |
| Model Number | HD-E703 |
| Certification | CE,ISO |
| Place of Origin | Guangdong, China (Mainland) |
View Detail Information
Explore similar products
Wet Back Textile Testing Equipment Diaper Leak Tester Water Vapour Permeability
Arbitrary Settings Electronic Specific Absorbency Tester Test Speed 1 ~ 40mm/S
Water Vapour Permeability Tester Impact Penetration Tester For Textile
280Rpm Reciprocating Water Bath Incubator Shaker 20mm Oscillation
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow | Supply Ability | 30 Sets per Month Haida |
| Delivery Time | 20 days after order confirmed | Packaging Details | ach set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Internal dimension | (W*D*H) 1000*800*1000mm | External dimension | (W*D*H) 1500*1180*1900mm |
| Test condition | 20±20C; 65% RH | Temperature range | -40~+150℃ |
| Temperature Accuracy | ±1℃ | Humidity range | 20~98%R.H. (Refer Image below) |
| Humidity accuracy | ±3%R.H | Cooling method | Air cooling |
| Brand Name | HAIDA | Model Number | HD-E703 |
| Certification | CE,ISO | Place of Origin | Guangdong, China (Mainland) |
| High Light | 380V thermal test chamber ，ISO thermal test chamber ，ISO thermal vacuum chamber | ||
Programmable Hot And Cold Shock Test Chamber, Environmental Test Chamber
Product Introduction:
Hot And Cold Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, it is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB and so on .
Features
To simulate test environment with different temperature and humidity
Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
Uncover test unit weakness in a short-term test with accelerated time effect
Test Standard:
1,GJB150.5A-2009
2,GB/2423.22-2012/IEC 60068-2-14:2009
3,GB/T 2424.13-2002/IEC 60068-2-33:1971
4,GJB360B-2009
5,GB/T 2423.1-2008/IEC6008-2-1-2007
6,GB/T 2423.2-2008/IEC60068-2-2:2007
7,GB/T 10589-2008
8,GB/T 11158-2008
Technical Parameters
| Model | HD-E703-200K40 | HD-E703-200K55 | HD-E703-200K65 | ||
| Nominal content product(L) | 200 | ||||
| Inside the box size(mm) | 650×450×670(W×H×D) | ||||
| Overall dimensions(mm) | 1530×1800×1980(W×H×D) | ||||
| Technical parameters | Temperature range | High temperature | RT～170 ℃ | ||
| Low temperature | －75℃ ～RT | ||||
| Test area | －40℃ ～150℃ | －50℃ ～150℃ | －65℃ ～150℃ | ||
| Temperature shock range | High temperature | 60℃ ～150℃ | |||
| Low temperature | －10℃ ～－40℃ | －10℃ ～－50℃ | －10℃ ～－65℃ | ||
| Normal temperature zone | Indoor temperature | ||||
| Temperature and humidity deviation | ±0.3℃,±2%R·H | ||||
| Difference in temperature and humidity | ±2℃,±3%R·H | ||||
| Heating rate | 2℃/min | ||||
| Cooling rate | 0.5~1.2℃/min | ||||
| Cold storage time | RT→－75℃≤ 65min | ||||
| Thermal storage time | RT→170℃≤ 35min | ||||
| Refrigeration system | Compressor | Imported German blog, R23 / R404A refrigerant | |||
| Cooling way | Water or air cooling | ||||
| Condenser | Stainless steel brazed plate type heat exchanger | ||||
| Heater/evaporator | Nickel-chromium electric heater/finned evaporator | ||||
| Microcomputer & display screen | TT-5188T3-7HLTaitong controller | ||||
| Drive motors | Drive | ||||
| Temperature and humidity sensor | Japan | ||||
| Safety measures | No fuse switch, compressor overpressure, overheat, overcurrent protection, fuse, water flow protection, phase sequence protection, oil pressure protection, pressure relief protection, low pressure protection, pressure cylinder protection, temperature limit protection | ||||
| Material | Chassis shell | High quality cold rolled steel sheet is sprayed with static electricity | |||
| Inner wall of the chassis | SUS304# Stainless steel plate | ||||
| Heat preservation material | Polyurethane rigid foam + high density fiberglass cotton | ||||
| Standard configuration | Test hole, floodlight, double vacuum bulletproof glass observation window | ||||
| Power supply | three-phase,380V,50Hz | ||||
Company Information
Haida International Equipment Co,Ltd is a National "High-tech Enterprise"(certified in 2016),integrating R&D,manufacturing and brand marketing.Our textile testing instruments meets with the requirements of ISO, ASTM, AATCC, BS, GB, DIN, EN, JIS. We are committed to providing high quality testing instruments.We always adhered to the strict and professional concept and strictly control the quality of products, and provide our customers with high-quality testing instruments,first-class service and competitive prices.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
5000000-7000000
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Haida International Equipment Co,Ltd was established in 2004, located in Dongguan city, Guangdong Province, China, is specialized in production and R&D of various material physical properties testing equipment. We have our own independent research and development center and four testing equipmen... Haida International Equipment Co,Ltd was established in 2004, located in Dongguan city, Guangdong Province, China, is specialized in production and R&D of various material physical properties testing equipment. We have our own independent research and development center and four testing equipmen...
Get in touch with us
Leave a Message, we will call you back quickly!