| Suitable Users | Residential & Commercial |
| Delivery Time | 30-45 Days |
| Supply Ability | 500,000 Pcs/year |
| Material Features | Corrosion Resistance |
| Water Pressure | 0.02-0.8MPa |
| Burner number | 3 |
| Connection Size | G1/2" (Gas/Inlet/Outlet) |
| Place Of Origin | China |
| Packaging Details | Plastic Film To Cover The Product, Foam Board To Support The Outer Box |
| Function | Low Water Pressure Start |
| Ignition Type | Automatic Pulse Ignition |
| Heat Exchange Material | Copper |
| Brand Name | Haobang |
View Detail Information
Explore similar products
Flue Exhaust Flue Gas Water Heater Instant Hot Water Heater All Color Will Be
10L 2.6GPM Instant Gas Water Heater Flue Type Wall Mounted
20KW 2.6 GPM Tankless Instant Gas Water Heater With LED Display
2.6 GPM LPG NG Gas Water Heater Flue Exhaust Glass Panel
Product Specification
| Suitable Users | Residential & Commercial | Delivery Time | 30-45 Days |
| Supply Ability | 500,000 Pcs/year | Material Features | Corrosion Resistance |
| Water Pressure | 0.02-0.8MPa | Burner number | 3 |
| Connection Size | G1/2" (Gas/Inlet/Outlet) | Place Of Origin | China |
| Packaging Details | Plastic Film To Cover The Product, Foam Board To Support The Outer Box | Function | Low Water Pressure Start |
| Ignition Type | Automatic Pulse Ignition | Heat Exchange Material | Copper |
| Brand Name | Haobang | ||
| High Light | low water pressure gas geyser ,copper heat exchange gas geyser ,industrial flue gas water heater | ||
Coastal sites combine two stresses that ordinary utility equipment may not encounter together: gusting wind at the chimney terminal and salt moisture around visible metalwork. This 6L flue type instant gas water heater brings the island and anti-backflow positioning into one carefully defined configuration. A backflow guard helps resist wind disturbance at the natural-draft path, while buyers can specify stainless-steel or protected coated panels better suited to service areas near the sea. Water flow initiates DC 3V pulse ignition, the three-section harmonica burner applies 12 kilowatts to the copper heating core, and approximately 6 litres per minute is delivered at a 25-degree Celsius rise. Adjustment from 30 to 55 degrees supports mild coastal inlet water without maintaining a storage tank between guests or household uses. The unit remains an open-flue appliance and depends on correct terminal placement; its protective features improve resilience but do not remove the installer’s responsibility for draft and ventilation.
The wall-mounted enclosure is 440 by 300 by 120 millimetres. Rated thermal input is 12 kilowatts and conversion efficiency is at least 84 percent. Nominal hot-water output reaches 6 litres per minute at the stated rise. Heating and stabilisation are each specified within 15 seconds, with outlet adjustment from 30 to 55 degrees Celsius. Water pressure may range from 0.02 to 0.8 megapascals. LPG versions require 2800 pascals and natural-gas versions 2000 pascals. DC 3V batteries power dual-pin pulse ignition. The water and fuel ports use G1/2-inch threads, and the natural-draft outlet accepts a 90-millimetre chimney. Panel material can be selected from white-coated metal, stainless steel, or glass, although the final choice should reflect exposure and maintenance conditions.
| Heat Exchange Material | Copper |
| Suitable Users | Residential & Commercial |
| Heating Efficiency | ≥85% |
| Temperature Control | Digital Display |
| Volume | 6 Liter |
| Ignition Type | Automatic Pulse Ignition |
| Material Features | Corrosion Resistance |
| Connection Size | G1/2" (Gas/Inlet/Outlet) |
| Water Pressure | 0.02-0.8MPa |
Coastal cottages, fishing lodges, island staff quarters, ventilated seaside kitchens, and covered resort service balconies are appropriate when one hot-water point is required. Site the terminal away from prevailing-pressure pockets beneath eaves or inside narrow courtyards, and use an approved wind cap with corrosion-resistant 90-millimetre flue sections. The room needs permanent replacement air even when exterior doors are often open. Never install in a sealed bathroom, bedroom, stairwell, or directly rain-washed location. Confirm wall strength, preserve 200 millimetres above and 150 millimetres on both sides, and protect the LPG cylinder outdoors. Test fuel joints with soap solution and observe flame stability during realistic wind. Do not assume sea breeze alone provides controlled ventilation.
This positioning combines an anti-wind flow-back device, flame-failure shutdown, durable panel selection, and battery ignition for locations where weather and grid reliability both matter. Low-pressure startup, dual electrodes, water-gas interlock, anti-dry protection, overheat and pressure controls, seasonal adjustment, and the 20-minute timer remain part of the platform. OEM buyers can define panel grade, coating, colour, local warning graphics, display, branding, and carton protection. MOQ starts at 100 pieces per model, samples allow field assessment, and production proceeds after approval and deposit. One-year warranty and free service parts support remote hospitality or dealer networks.
The backflow guard cannot make a chronically reversing chimney safe, and stainless steel does not make the appliance suitable for open rain exposure. Stop use after repeated flame loss, yellow combustion, or storm damage. Do not add improvised mesh that may obstruct the terminal. Close LPG valves during vacancy, wipe salt deposits from the exterior, and inspect flue joints and fasteners for corrosion. Replace batteries before the main season, clear nests and debris, clean the inlet filter, and have a technician test the burner and safety devices annually.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1997
Total Annual:
7000000-10000000
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Company Details Since its establishment in 1997, Zhongshan Hobun Electric&Gas Appliances Co., Ltd. has developed into a large-scale home appliance manufacturing enterprise with a factory covering an area of more than 30,000 square meters through years of arduous pioneering eff... Company Details Since its establishment in 1997, Zhongshan Hobun Electric&Gas Appliances Co., Ltd. has developed into a large-scale home appliance manufacturing enterprise with a factory covering an area of more than 30,000 square meters through years of arduous pioneering eff...
Get in touch with us
Leave a Message, we will call you back quickly!