166000897r Fuel Injector 28237259 28232234 H8200827965 for Nissan 1.5 Dci

<Product Description> This electronically controlled high-pressure common rail fuel injection valve body assembly (standard part code: 166000897R / 16600-0897R, common cross-reference and OE interchangeable identification numbers include 0445110485, 0 445 110 485, 166006212R, H8201100113, etc., mainly matched with 1.5 dCi / 1.6 dCi / 2.0 dCi K9K, R9M series high-pressure common rail diesel power platforms, widely installed in compact cars, crossover SUVs, urban commercial MPVs and light passenger and freight vehicles) is meticulously crafted. As a micro-metering and ultra-fine spray execution unit that controls the precision of the fuel supply system, it is responsible for accurately metering high-pressure diesel fuel and rapidly dispersing it into ultra-fine atomized particles under microsecond-level electrical signal commands, promoting full mixing and combustion of fuel and intake airflow.

The product adheres to the manufacturing standards of "microscopic ultra-fine atomization and millisecond-fast response." Internal needle valve components and control valve cores are made from carefully selected aerospace-grade hardened special alloy steel, combined with ultra-high precision geometric grinding and low-friction polishing. The surface is coated with a high-density, ultra-wear-resistant DLC hardened coating, effectively preventing early erosion and jamming caused by diesel impurities. After the parts are installed, drivers and mechanics will experience a significantly improved driving experience: crisp and rapid cold starts in the morning, and the severe vibrations at low-speed idling have subsided and become smooth; in urban driving, starting from a stop, climbing hills with a full load, or overtaking at high speeds, the accelerator pedal response is firm and sensitive, acceleration is smooth and powerful, and exhaust smoke is significantly improved, resulting in satisfactory fuel consumption control and a smooth driving experience.

<Product Description>

Product Advantages

</Product Advantages>

Parameter Table

Application Scenarios

Intercity Express Delivery and Short-Distance Freight Scenarios: Small vans and multi-purpose buses are often fully loaded for delivery, requiring the engine to continuously provide stable high torque output in the low-speed range. When vehicles experience starting difficulties, excessive acceleration, and black smoke from the exhaust, the maintenance team promptly replaces the entire nozzle assembly. Precise fuel atomization restores ample engine power, enabling rapid acceleration at low speeds and easily handling frequent start-stop cycles and heavy loads, ensuring efficient and timely last-mile delivery.

Urban high-frequency daily commuting and light passenger vehicle transport scenarios: Diesel passenger cars and light passenger vehicles face extremely high demands for smooth fuel supply and fuel control during frequent stop-and-go city driving and long-distance cruising. When drivers notice sluggish acceleration for overtaking, insufficient power when climbing hills in high gears, or significant idling vibration, mechanics promptly replace the fuel injection valve with this high-precision common rail injector. After replacement, fuel atomization is extremely fine and uniform, resulting in a tight and brisk engine power output, smooth throttle response, and effectively improved driving quality and fuel economy.

Application Scenarios

Frequently Asked Questions