Fuel Injector 22569104 Bebe1r17001 Bebe1r17101 Bebe1r17201 Common Rail Injector

Product Description

<Product Description> This high-pressure electronically controlled common rail fuel injection assembly (part number: 22569104; common cross-reference numbers and OE interchangeable identification numbers include 21340611, 20708600, 85003963, 21947757, etc., mainly matched with D11 and D13 series 10.8L/12.8L displacement inline six-cylinder heavy-duty diesel power platforms, widely installed in highway tractors, engineering dump trucks, and large-scale work equipment) is meticulously crafted. As the micro-metering and ultra-fine spray execution unit in the entire fuel supply system, it is responsible for accurately metering high-pressure diesel fuel and rapidly dispersing it into ultra-fine atomized particles under microsecond-level electrical signal commands, promoting uniform mixing and complete combustion of fuel and air within the cylinder.

The product adheres to the manufacturing standards of "microscopic ultra-fine atomization and millisecond-fast response." Internal needle valve components and control valve cores are made from carefully selected aerospace-grade quenched special alloy steel, combined with ultra-high precision geometric grinding and low-friction polishing. The surface is covered with a high-density, ultra-wear-resistant DLC hardened coating, effectively preventing internal scoring and jamming caused by diesel impurities. After the parts are installed, mechanics and equipment operators will experience a very direct upgrade: crisp and rapid cold starts, and the severe vibration at low idle speeds subsides and becomes smooth; under fully loaded climbing, frequent starts, or heavy-load operation, the accelerator pedal response is firm and sensitive, acceleration is smooth and the power is continuous, effectively improving exhaust smoke and bringing a satisfactory fuel efficiency control and smooth driving experience.

<Product Description>

<Product Advantages>

</Product Advantages>

<Parameter Table>

| </Parameter Table> | |

<Application Scenarios>

Long-haul logistics and heavy-duty tractor-trailer inter-provincial transportation: Heavy-duty semi-trailer tractors and highway trucks often operate under full load and high load conditions during inter-provincial long-haul transportation, placing extremely high demands on the continuous fuel supply stability and fuel control of the injectors. When truck drivers notice a lack of acceleration and insufficient power when climbing hills, resulting in reduced power, the maintenance team promptly replaces this high-precision common rail injection valve. After replacement, fuel injection establishes quickly and stably, providing ample and smooth acceleration under heavy loads, ensuring timely and efficient long-haul transportation.

Urban construction waste transportation and heavy-duty dump truck transportation scenarios: Construction dump trucks and heavy-duty transport vehicles frequently start and climb hills in complex road conditions and dusty construction sites. When vehicles experience starting difficulties, severe idling vibrations, or uneven cylinder operation, the maintenance team replaces the entire set of high-specification fuel injection components. Precise electronic injection control allows the engine to instantly release high torque at low speeds, smoothly handling frequent start-stop cycles and heavy loads, ensuring efficient and smooth transportation operations.

**Application Scenario**