Dongtai Yaoqiang machinery Co.,Ltd
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 10 sets/month |
| Delivery Time | 20 days |
| Packaging Details | standard packing |
| Automatic or Not | yes |
| Web Height | 150-2000mm |
| Welding speed | 240-2400 mm/min |
| Voltage | standard 380V |
| HS Code | 84688000 |
| Usage | H Beam production line |
| Brand Name | yaoqiang |
| Model Number | LHA4000 |
| Place of Origin | Jiangsu China |
View Detail Information
Explore similar products
DC-1000 MZ-1000 Automatic H Beam Welder 220V-480V
200-800mm H Beam Welding Machine Submerged Arc Automatic MZ-1000
H Beam 200-1500mm I Beam Machine , Submerged Arc Welding Machine
Steel Saw H Beam Welding Machine 6-32mm With MZ1000 Submerged Arc Welding Power
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 10 sets/month |
| Delivery Time | 20 days | Packaging Details | standard packing |
| Automatic or Not | yes | Web Height | 150-2000mm |
| Welding speed | 240-2400 mm/min | Voltage | standard 380V |
| HS Code | 84688000 | Usage | H Beam production line |
| Brand Name | yaoqiang | Model Number | LHA4000 |
| Place of Origin | Jiangsu China | ||
| High Light | Submerged Arc Gantry Type Welding Machine ，H Beam 2000mm Welding Machine ，Peb H Beam Welding Machine | ||
240-2400 Mm/Min Automatic H Beam Production Line Steel Fabrication Welding Machine 150-2000mm
Horizontal Line Main Features
1.Only need to spot welding at two terminals of the work-piece (without the full-length spot welding of whole work-piece), then it can enter the next step-- weld. The assembly welding machine will weld the three "loose plates" after positioning, greatly increase the efficiency.
2.With the horizontal placement of work-piece (web horizontal, flange vertical) and the welding mode of work-piece moving, two seams can be welded simultaneously to reduce the distortion of work-piece caused by welding heat.
3. Equipting AOTAI welding(Lincoln is avaiable) power source to achieve single-arc double-wire welding, using 1.6mm welding wire, welding speed can be up to 1.2 m / min, good weld formation, beautiful appearance
4. Due to the automation degree of the production line is much higher than that of the traditional production line, it can reduce the labor intensity of workers and reduce the number of operators. The production line only needs 4-5 operators to produce normally.
5. available for H Beam with variable cross section ≤ 8 °
Double cantilever gantry welding machine is the most popular machine developed by our company. Mainly complete the welding assembly work of H-shaped steel and Box-shaped steel. The double cantilever submerged arc welding machine improves the welding efficiency. According to the requirements of the beam, you can choose a single arc single wire or a double arc double wire submerged arc welding machine.
The sub-merge arc welding power setup device is on the gantry gate, and moves along. In this way, the control cable and welding cable are short, and response fast, with small pressure drop and stable welding currency.
Welding control and gate frame control are integrated and easy to operate. The cable in welding arm is in the form of imported drag chain, neat and safe.
| Model | LHA | |||||
| Rail span mm | 4000 | 5000 | 5500 | |||
| Controller position | Middle | Side | Middle | Side | Middle | side |
| Web height mm | 160-1200 | 160-1500 | 160-2000 | 160-2300 | 160-2200 | 160--2500 |
| Flange width mm | 140-800 | |||||
| Job length mm | 4000-15000 | |||||
| Welding speed mm/min | 240-2400 | |||||
| Machine power kW | 9 | 9.7 | ||||
| Power supply | AC380V, 50HZ, 3P or tailor made | |||||
| Above are our standard models and parameters, and it can be designed and manufactured on request. | ||||||
Main Features:
1.Gantry gate unit: Gantry gate,travel device,lateral sliding device,feeding wire wheel and pipe
accessories;
2.Welding arm and carriage: Welding arm,motor transmission device,move device and accessories (2 sets each);
3.Arc guide device: Welding gun,mechanical adjusting unit and feeding wire machine (2 sets each);
4.Flux recovery system:100kg flux recovery machine,separate material barrel,flux hopper,flux recoveryand transmission pipe;
5.Electric control system: Electric control cabinet,AC frequency converter,operation box,lighting
warning light;
6.Pipe and wire system: Welding machine power wire,control wire,welding cable,gantry gate control
cable,air source pipe,suspending sliding frame;
7.Welding system: MZ-1000/DC-1000 submerge arc welding machine*2sets;
8.Welding Qty: 2pcs H beam once completed.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2003
Total Annual:
30000-10000000
Employee Number:
>100
Ecer Certification：
Active Member
Dongtai Yaoqiang Machinery Manufacturing Co., Ltd. is located in the beautiful Taihu Lake - Wuxi, Jiangsu, and its manufacturing base is located in the wetland capital - tangyangxinhong Industrial Park, Dongtai, Jiangsu, covering an area of 20 mu. It is a company with modern industrial plant layout ... Dongtai Yaoqiang Machinery Manufacturing Co., Ltd. is located in the beautiful Taihu Lake - Wuxi, Jiangsu, and its manufacturing base is located in the wetland capital - tangyangxinhong Industrial Park, Dongtai, Jiangsu, covering an area of 20 mu. It is a company with modern industrial plant layout ...
Get in touch with us
Leave a Message, we will call you back quickly!