Anhui Hechuang New Synthetic Materials Co., Ltd
| Payment Terms | T/T, L/C |
| Supply Ability | 3000㎡ per day |
| Delivery Time | 10-20 days |
| Packaging Details | Folded strips are wrapped by film and layed on pallets or as requested |
| Material | 100% HDPE Plastic |
| Thickness | 1.2-1.5mm |
| Surface | Smooth or Textured surface |
| Tensile Strength | 25kN/m |
| Standard | ASTM; GB Standard； |
| Peel Strength | 14.2 kN/m |
| Height | 75mm |
| Color | Black;Yellow;Green |
| Welding Distance | 330mm |
| Density | 0.950 g/cm3 |
| Certificate | CE;ISO;ASTM |
| Brand Name | GeoMax |
| Model Number | GM75-330 |
| Certification | CE,ISO9001-2015 |
| Place of Origin | ANHUI CHINA |
View Detail Information
Explore similar products
Road Stabilization HDPE Geo Cell Mat Geocellular Confinement Systems ODM
Honeycomb HDPE Geocell Cellweb 100mm 50mm Plastic Gravel Stabilizer
ODM Plastic Ground Grid HDPE Geocell Textured Perforated GM150-712 Base
100mm HDPE Geocell Slope Erosion Control Virgin Material 1.5MM Thickness Slope
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 3000㎡ per day |
| Delivery Time | 10-20 days | Packaging Details | Folded strips are wrapped by film and layed on pallets or as requested |
| Material | 100% HDPE Plastic | Thickness | 1.2-1.5mm |
| Surface | Smooth or Textured surface | Tensile Strength | 25kN/m |
| Standard | ASTM; GB Standard； | Peel Strength | 14.2 kN/m |
| Height | 75mm | Color | Black;Yellow;Green |
| Welding Distance | 330mm | Density | 0.950 g/cm3 |
| Certificate | CE;ISO;ASTM | Brand Name | GeoMax |
| Model Number | GM75-330 | Certification | CE,ISO9001-2015 |
| Place of Origin | ANHUI CHINA | ||
| High Light | 75mm HDPE geocell for soil stabilization ，textured geocell for park paths ，HDPE geocell for walkways | ||
75mm Textured HDPE Geocell for Park Paths, Walkways Garden Soil Stabilization
SPECIFICATIONS
| Index Properties | Test Method | Units | Values | |||||||
| Material | - | - | 100% Virgin HDPE | |||||||
| Carbon Black content | ASTM D 1603 | % | ≥1.5 | |||||||
| Density | ASTM D 1603 | g/cm3 | 0.935-0.965 | |||||||
| Sheet Thickness ± 3% | ASTM D 5199 | mm | 1.5 | |||||||
| Seam Peel Strength | USACE GL-86-19 | KN/m | ≥14.2 | |||||||
| Tensile strength at Yield | ASTM D 1603 | KN/m | ≥22 | |||||||
| Environmental stress crack resistance | ASTM D 1603 | hrs | ≥5000 | |||||||
| OIT oxidation induction time | ASTM D 1603 | min | ≥150 | |||||||
| Type | GM330 | GM356 | GM400 | GM432 | GM445 | GM500 | GM660 | GM712 | ||
| Welding Distance(mm) ± 3% | 330 | 356 | 400 | 432 | 445 | 500 | 660 | 712 | ||
| Cell Depth(mm) ± 3% | 50,75,100,150,200,250 | |||||||||
| Dimensions | ||||||||||
| Expanded Cell Size (width×length) (mm) ± 3% | 250 x 210 | 260 x 225 | 290 x 260 | 320 x 275 | 315 x 300 | 360 x 300 | 470 x 450 | 510 x 475 | ||
| Expanded Cell numbers(width×length) | 10 x 34 | 9 x 34 | 8 x 34 | 8 x 34 | 8 x 34 | 7 x 34 | 5 x 34 | 5 x 34 | ||
| Expanded Section size (width×length) (m) ± 3% | 2.50 x 7.14 | 2.34 x 7.65 | 2.32 x 8.84 | 2.56 x 9.35 | 2.52 x 10.2 | 2.52 x 11.22 | 2.35 x 15.3 | 2.55 x 16.15 | ||
| Expanded Section Area (m2) ± 5% | 17.85 | 17.9 | 20.5 | 23.94 | 25.7 | 28.74 | 35.95 | 41.18 | ||
| SOIL REINFORCEMENTGeomax®(Hdpe Geocell) is the solution to soil stabilization or soil reinforcement. It can increase the bearing capacity of the pavement and avoid cracking of the pavement. |
| SLOPE PROTECTIONGeomax®(Hdpe Geocell) is the obvious choice for slope protection or erosion control. It has both good drainage effect and slope protection. |
| CHANNEL PROTECTIONGeomax®(Hdpe Geocell) delivers stability and protection of channels |
| RETAINING WALLSGeomax®(Hdpe Geocell) offers highly permeable and acts as a great number of planting pots, allowing rainwater to infiltrate, minimizing runoff. |
What are the key failure modes of geocell systems?
Primary failure modes include:
Excessive deformation from inadequate confinement
Seam failure due to poor welding quality
Pull-out failure from insufficient anchorage
Surface rutting from inadequate infill compaction
Long-term creep under sustained loads
How does cell geometry affect performance?
Cell geometry influences:
Stress distribution pattern
Interface shear resistance
Installation convenience
Infill compaction efficiency
Optimal aspect ratios (height to diameter) typically range from 0.5 to 1.0 for most applications.
Material Science & Manufacturing
What polymer grades do you use and why?
We use specially formulated HDPE grades with:
High molecular weight for better stress crack resistance
Controlled melt flow index for consistent processing
UV stabilization packages for long-term durability
Antioxidant additives to prevent thermal degradation
Company Details
Business Type:
Manufacturer,Trading Company,Seller
Year Established:
2006
Employee Number:
180~220
Ecer Certification：
Verified Supplier
Anhui Hechuang New Synthetic Materials Co., Ltd. is a professional manufacturer and supplier of geosynthetic materials and products that are used for civil engineering and constructions. With solid strength and strong momentum of development, Hechuang has achieved rapid growth over the past year... Anhui Hechuang New Synthetic Materials Co., Ltd. is a professional manufacturer and supplier of geosynthetic materials and products that are used for civil engineering and constructions. With solid strength and strong momentum of development, Hechuang has achieved rapid growth over the past year...
Get in touch with us
Leave a Message, we will call you back quickly!