3600m3/H Portable Hardwall Clean Room Iso 7 Laboratory Anlaitech

Product Specification

Portable iso 7 Hardwall clean room For Laboratory

Our modular hardwall cleanrooms provide a clean, protected, and structured environment, without the need for internal bracing or ceiling supports, unlike other modular structures. We have many different modular cleanroom options to suit your needs. All our hardwall cleanroom components are prefabricated and 100% modular in design. Our modular cleanrooms can be installed by the end user, or by our factory trained technicians, whichever you prefer.

Our standard hardwall cleanroom systems utilize a panelized wall structure that supports the roof and ceiling grid. Filtered air is provided by ceiling-mounted, self-powered filter units which draw outside air through a pre-filter, which then feeds to a HEPA filter, and into the hardwall modular cleanroom. Filtered air is then exhausted from the hardwall modular cleanroom via adjustable near floor level exhaust vents. Cleanliness levels will vary depending on the quantity and configuration of filters as well as the industry you are catering to.

Hard-walled Modular Cleanroom Advantages

Due to their ease of maintenance and simple installation methods, hard-walled modular cleanrooms are increasing in popularity in numerous industries across the globe. Since they can be installed quickly and easily and can be modified or even relocated with minimal expense and downtime. Many prefabricated modular cleanrooms are almost 100% reusable. Some additional benefits of a hard-walled modular cleanroom include:

Less expensive than sheetrock construction

Easily installed in days, not weeks

Factory-cut options, with numerous custom options

Pre-wired UL Classified raceway installation capabilities

Insulated wall options for reduced energy costs

Anteroom and gowning room options for reduced contamination

Airlock, air shower, and pass-through box options for reduced contamination from personnel and materials

Hardwall Modular Cleanroom Ceiling & Roof System

Our modular cleanrooms provide heavy duty steel hardwall construction that features a T-grid with a 2’ by 4’ pattern support filters, light fixtures, and cleanroom tiles. Gasketing material is also included with our 1.50” hardwall modular cleanroom T-bar systems. Our hardwall cleanroom ceiling grids are supported by a corrugated steel deck, panel roof, or structural steel supports for gaps greater than 20’. In addition, our aluminum T-grid and gel grid ceiling systems are available for special applications.

How to Determine the Correct Cleanroom Classification Based on Your Needs?

A typical cleanroom is designed to keep outside contaminants and particles at a minimum based on the ISO clean room standards. Once fully built and operational, an isolated cleanroom is free from outside particles and contamination. However, the two things that can introduce particles and contamination into your cleanroom are people and processes.

Classification for cleanrooms ranges from ISO 1 to ISO 9, with ISO 9 being the “dirtiest” and ISO 1 being the “cleanest.” These classifications are assigned based on the maximum allowable concentration of particles per cubic foot or meter of air. The lower the ISO class the more stringent the requirements for keeping particles and contamination to the acceptable levels of the room class.

As an example, Class 10,000 cleanroom filtration systems must provide filter coverage of 15-25% and – a minimum of 60 air changes per hour. The standard air flow rate for an ISO 7 filtration system is 9-16 CFM per square foot. The chart below provides an explanation of the differences between our clean room classes.