Qingdao Jurong ENGINEERING&TECHNOLOGY Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T |
| Supply Ability | 20set/day |
| Delivery Time | 15-30days |
| Packaging Details | 500*600*250MM |
| Name | Ultrasonic Cleaning Machine |
| Size | 500*600*250MM |
| Ultrasonic power | 0.6kw |
| Heating power | 1.5kw |
| Capacity | 38L |
| Model | JR-1018 |
| Warranty | 12 Months |
| Cleaning type | Industrial Ultrasonic Cleaner,Ultrasonic cleaning |
| Brand Name | JURONG |
| Model Number | JR-1018 |
| Certification | CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Cylinder Head Cleaning Machine Washing Small Desktop Engine Chassis Rust Wax
Fuel Injection Ultrasonic Injector Cleaner Machine Equipment 100x50x55cm
Alley Commercial Bowling Ball Cleaning Machine Ultrasonic Teeth Pcb Washing
Mould Ultrasonic Cleaning Machine For Gun Parts Pcb Chain Type
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T | Supply Ability | 20set/day |
| Delivery Time | 15-30days | Packaging Details | 500*600*250MM |
| Name | Ultrasonic Cleaning Machine | Size | 500*600*250MM |
| Ultrasonic power | 0.6kw | Heating power | 1.5kw |
| Capacity | 38L | Model | JR-1018 |
| Warranty | 12 Months | Cleaning type | Industrial Ultrasonic Cleaner,Ultrasonic cleaning |
| Brand Name | JURONG | Model Number | JR-1018 |
| Certification | CE | Place of Origin | CHINA |
| High Light | ultrasonic carb cleaning machine ，Carburetor Ultrasonic Cleaning Machine ，Ultrasonic Cleaning Machine 38L | ||
Electrolytic Mold Ultrasonic Cleaning Machine,
Ultrasonic Cleaning Machine Manufacturers Ultrasonic Cleaning Machine
| Size | 500*600*250MM |
| Slot size | 400×500×200MM |
| Ultrasonic power | 0.6kw |
| Heating power | 1.5kw |
| Capacity | 38L |
| Model | JR-1018 |
| Direction of ultrasonic | Downside |
| Slot number | 3 |
| Cleaning temperature | 20-95℃ |
Ultrasonic cleaning machine maintenance
1. The power supply is 380V AC. (three phase four wire)
2. First connect the signal line between the ultrasonic power supply and the cleaning tank. (check mark connection)
3. Add liquid to the cleaning tank, and the height is about 300mm. When the liquid in the liquid storage box reaches half of the height of the liquid storage box, the temperature is 40-55 degrees.
4. Put the workpiece to be cleaned into the cleaning tank, and try not to contact the bottom directly. Do not hit the side wall of the cleaning tank.
5. Set the working time of the ultrasonic wave (note that the time cannot be zero), press the start button of the ultrasonic wave, and the ultrasonic wave begins to work.
6. The cleaning time is determined according to the degree of oil pollution of the workpiece.
7. Please close the filtration water valve when the circulation filtration is closed.
8. Clean the sludge at the bottom of the cleaning tank regularly.
9. In summer, if the equipment is not used for a long time (7 days), the liquid in the cleaning tank should be discharged clean, and the tank should not be frozen in winter.
10. In case of large dust in the workshop, compressed air should be used to clean the dust in the power distribution cabinet every month.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2013
Total Annual:
1500000-10000000
Ecer Certification：
Active Member
Qingdao Jurong Engineering Technology Co., Ltd was established in May 2013, which is located in the Huangdao District (West Coast New District), Qingdao City, Shandong Province with a registered capital of Two Hundred Million Yuan. The company is dedicated to the product development, technical resea... Qingdao Jurong Engineering Technology Co., Ltd was established in May 2013, which is located in the Huangdao District (West Coast New District), Qingdao City, Shandong Province with a registered capital of Two Hundred Million Yuan. The company is dedicated to the product development, technical resea...
Get in touch with us
Leave a Message, we will call you back quickly!