316L Stainless Steel RO Integrated Reverse Osmosis Equipment For Electronics

Product Specification

316L Stainless Steel RO Integrated Reverse Osmosis Equipment for Electronics Ultra-Pure Water

I.Product Overview

The 316L Stainless Steel RO Integrated Reverse Osmosis Equipment is a high-performance water purification system specially designed for the electronics and semiconductor industries, where ultra-pure water quality is essential. It integrates precision filtration, advanced reverse osmosis (RO), and intelligent control technologies into one compact and durable unit, ensuring stable, high-purity water output for critical production processes.

II.Key Features

High-Grade Material Construction:

The entire system is made of corrosion-resistant 316L stainless steel, ensuring long-term durability, sanitary operation, and compliance with electronic-grade water standards.

Advanced Reverse Osmosis Technology:

Equipped with high-rejection RO membranes to effectively remove dissolved salts, silica, organics, and particulates, achieving water resistivity up to >15 MΩ·cm (with optional EDI polishing).

Integrated Design:

Compact skid-mounted structure combines pre-treatment, RO system, electrical control, and piping in one unit for easy installation, maintenance, and operation.

Intelligent Control System:

PLC + touch screen interface provides real-time monitoring of flow rate, conductivity, pressure, and fault alarms for fully automatic operation.

Energy Efficiency & Reliability:

Optimized high-pressure pumps and flow design reduce energy consumption while maintaining stable permeate quality.

III.Technical Parameters

FAQ

1. Q: Which machine should I choose?

A: It depends on your raw water quality and your requirements for permeate water.

Usually, there are three parts: pretreatment, the RO machine, and post-treatment. Pretreatment could be a UF(ultra filtration) system,anti-scale dosing system, flocculant dosing system, disinfectant dosing system, water softener, sand filter, carbon filter, security filter, etc. Post treatment could be a UV sterilizer, Ozonizer, ClO2 sterilizer, etc. And maybe you need an EDI system. We will choose the proper process according to your raw water quality and permeate water.

2. Q: What’s your machine material?

A: For pretreatment tanks, we usually use FRP or S.S. The RO frame could be S.S., carbon steel. For pipes, it is usually SS and UPVC. We can choose the material according to your special requirements.

3. Q: What’s the control method?

A: For pretreatment, you can choose manual or automatic; for the whole system, we use relay, PLC, or man-machine interface remote control

4. Q: Which spare parts need to be changed regularly?

A: Filter cartridge in the security filter and RO membranes. For the filter cartridge, it needs to be changed every 3-6 months, and for the RO membrane, you need to change it every 1-3 years. It depends on your water quality and how you maintain the machine.

5. Q: What’s your warranty?

A: Our warranty is 2 years. But in our experience, our machine can work for 5 years before repair.

6. Q: What’s your electricity requirement?

A: Our machine could be 380V/220V/110V, 50HZ/60HZ, 3 phase/single phase. We can do customer-made products.

7. Q: What’s your machine size?

A: It depends on the capacity requirement, and we can make changes according to your space.

8. Q: What’s your membrane brand?

A: We have all kinds of brands, the most used are the Dow brand membrane, or, as requested by guests.