Industrial 10T 20T/H Pure Water Equipment With Reverse Osmosis System With Dow

Product Specification

Industrial 10T 20T/H Pure Water Equipment With Reverse Osmosis System With Dow Membrane

I.Overview

Pure water equipment is a device that improves water quality, salt, molecules and organic matter through multi-stage filtration, ion exchange, reverse osmosis (RO), EDI and other methods. It has low instantaneous water conductivity and high purity, and is widely evaluated in industries such as industry, laboratories, medical care, and food and beverage.

II. Main Process Flow

Pretreatment System

Quartz Sand Filter: Removes large particles such as silt and rust.

Activated Carbon Filter: Removes residual chlorine, odor, and organic matter.

Softener/Dosing System: Reduces hardness and prevents scaling.

Core System

Reverse Osmosis (RO): Removes over 99% of dissolved salts and harmful substances through high-pressure membrane separation.

Electrodeionization (EDI) (optional): Continuously produces ultrapure water by further polishing the RO process.

Post-Treatment System (optional)

UV Sterilizer: Kills microorganisms.

Microporous Filter: Removes fine particles to ensure effluent quality.

III.Product Features

Stable water quality: Conductivity can be as low as ≤ 1 μS/cm, or even as high as 18 MΩ·cm (laboratory grade).

Low operating costs: High degree of automation, minimal manual operation.

Energy-saving and environmentally friendly: The system can be configured with a water recovery device based on water quality.

Widely applicable: Customizable water output rates (0.25–100 tons/hour) are available.

IV:Parameters

V:Package of Pure water equipment

FAQ

1. Q: Which machine should I choose?

A: It depends on your raw water quality and your requirements for permeate water.

Usually there are three parts: pretreatment, RO machine, and post treatment. Pretreatment could be UF(ultra filtration) system,anti-scale dosing system, flocculant dosing system, disinfectant dosing system, water softener, sand filter, carbon filter,security filter etc. Post treatment could be UV sterilizer, Ozonizer, ClO2 sterilizer, etc. And maybe you need an EDI system. We will choose proper process according to your raw water quality and permeate water purpose.

2. Q: What’s your machine material?

A: For pretreatment tanks, we usually use FRP or S.S. The RO frame could be S.S, carbon steel.For pipes, it is usually S.S and UPVC. We can choose material according to your special requirements.

3. Q: What’s the control method?

A: For pretreatment, you can choose manual or automatic; for the whole system, we use relay, PLC or man-machine interface remote controld

4. Q: Which spare parts need to change regularly?

A: Filter cartridge in the security filter and RO membranes. For filter cartridge, it needs to change each 3-6 months, and for RO membrane, you need to change each 1-3 years. It depends on your water quality and how you maintain the machine.

5. Q: What’s your warranty?

A: Our warranty is 2 year. But to our experience, our machine can work 5 years before repair.

6. Q: What’s your electricity requirement?

A: Our machine could be 380V/220V/110V, 50HZ/60HZ, 3 phase/single phase. We can do customer made products.

7. Q: What’s your machine size?

A: It depends on the capacity requirement and we can make changes according to your space.

8. Q: What’s your membrane brand?

A: We have all kind of brand ,most used are Dow brand membrane,or as guest request .