Ms27484t10b35pn Mil-Spec Electrical Connector for Secure Wiring Solutions

MS27484T10B35PN Threaded Plug, MIL-DTL-27484

The MS27484T10B35PN is a threaded circular electrical connector plug designed for aerospace, avionics, and industrial platforms. It conforms to MIL-DTL-27484 (formerly MS27484) requirements. Note: MIL-DTL-27484 is a distinct standard, separate from MIL-DTL-26482 Series 1 (MS3106), MIL-DTL-26482 Series 2 (62GB), MIL-DTL-38999 / GJB599, MIL-DTL-27473 (MS27473), MIL-DTL-27497 (MS27497), MIL-DTL-27508 (MS27508), JY27466 (GJB), 8D series, Y50 series, YLH series, ZH8525 series, YH3116 series, YW1 series, and SMA RF coaxial connectors, and is not directly form-fit-function interchangeable with any of those connectors unless confirmed by the supplier.

This threaded plug features shell size 10 (approximately equivalent to D38999 shell size B / 11), shell letter B, insert arrangement 10B-35 (13 contacts: 13 x #22D signal, Service Class M - sealed), pin contacts (P), and normal keying (N). The "T" style designation indicates a threaded coupling type. The design supports EMI shielding, scoop-proof mating, self-locking threaded coupling, and removable crimp contacts.

Product Features

• Conformant to MIL-DTL-27484 (MS27484) circular connector standard
• NOT directly interchangeable with MIL-DTL-26482 Series 1 (MS3106), MIL-DTL-26482 Series 2 (62GB), MIL-DTL-38999 / GJB599 Series III, MIL-DTL-27473 (MS27473), MIL-DTL-27497 (MS27497), MIL-DTL-27508 (MS27508), JY27466 (GJB), 8D series, Y50 series, YLH series, ZH8525 series, YH3116 series, YW1 series, or SMA RF coaxial connectors unless confirmed by supplier
• Threaded plug construction (T style) with threaded coupling
• Shell size 10 (approximately D38999 shell size B / 11), shell letter B
• Sealed signal configuration with insert arrangement 10B-35: 13 x #22D signal contacts (Service Class M - sealed)
• Pin contacts (P) for mating with socket-contact connectors
• Normal keying (N) for standard polarization and anti-mismatch mating
• EMI shielded (conductive shell), scoop-proof, crimp removable contacts

Technical Specifications - MS27484T10B35PN

Part Number Breakdown

Related options: MS27484T10B35SN with socket contacts; MS27484T8B35PN for smaller shell size 8 (approx. D38999 size A / 9); MS27484R10B35SN mating receptacle with socket contacts; MS27484T10B98PN non-sealed arrangement (13 contacts, Service Class I). Important: MIL-DTL-27484, MIL-DTL-27473, MIL-DTL-26482 Series 2 (62GB), MIL-DTL-26482 Series 1 (MS3106), YW1 series, SMA RF coaxial, YH3116 series, ZH8525 series, YLH series, Y50 series, 8D series, JY27466 (GJB), MS27497 (MIL-DTL-27497), MS27508 (MIL-DTL-27508), and D38999/J599 (MIL-DTL-38999/GJB599) are separate standards/series and are NOT form-fit-function interchangeable unless confirmed by supplier.

Compatible Applications

The MS27484T10B35PN connector is intended for platforms that require MIL-DTL-27484 compliant interconnects in shell size 10 with sealed signal circuits. Typical use cases include:

• Aircraft and helicopter wiring harness interconnects (MIL-DTL-27484 standard)
• Avionics LRUs, radar, and communication equipment
• Ground vehicles and rugged electronic enclosures
• Shipboard and industrial equipment requiring sealed circular connectors
• Programs that standardize on MIL-DTL-27484 (MS27484) interfaces

Selection Guide

Installation Notes

• Verify shell size 10, insert arrangement 10B-35, pin contacts, and normal keying before mating.
• Use the correct crimp tooling for #22D signal contacts specified by arrangement 10B-35.
• Fully engage the threaded coupling with the mating MS27484 connector until securely seated.
• Mate only with MIL-DTL-27484 (MS27484) connectors of the same shell size 10, shell letter B, arrangement 10B-35, opposite contact gender (socket), and normal keying. Note: arrangement 10B-35 is Service Class M (sealed) — suitable for environments requiring environmental sealing.
• Do NOT attempt to mate with MIL-DTL-26482 Series 1 (MS3106), MIL-DTL-26482 Series 2 (62GB), MIL-DTL-27473, D38999/J599 Series III, MS27497, MS27508, JY27466, 8D, Y50, YLH, ZH8525, YH3116, YW1 series, or SMA RF coaxial connectors — MIL-DTL-27484 is a different standard and is not interchangeable unless confirmed by supplier.

Why Choose MS27484T10B35PN

MIL-DTL-27484 Compliance

Choosing MS27484T10B35PN ensures compliance with MIL-DTL-27484 (MS27484) requirements for programs that mandate this specific standard. The connector geometry supports reliable interconnect with sealed signal pin contacts and normal keying for aerospace and industrial systems. Note: this connector is NOT a direct replacement for MIL-DTL-26482 Series 1 (MS3106), MIL-DTL-26482 Series 2 (62GB), MIL-DTL-27473, D38999/J599 Series III, MS27497, MS27508, JY27466, 8D, Y50, YLH, ZH8525, YH3116, YW1 series, or SMA RF coaxial parts. Confirm exact specifications and interchangeability with supplier.

Ordering Information

Order by the designation MS27484T10B35PN. When requesting a quote, please confirm mating connector part number (socket contact receptacle), shell finish, contact plating, and required quantity. Note: arrangement 35 is Service Class M (sealed); specify arrangement 98 for non-sealed Service Class I applications.