Jy27466t11f35pln Front Wall Mount Receptacle D38999 Series I Connector

JY27466T11F35PLN Threaded Circular Plug, GJB Standard

The JY27466T11F35PLN is a threaded circular electrical connector plug designed for aerospace, avionics, and industrial platforms. It conforms to JY27466 (GJB) requirements. Note: JY27466 is a Chinese  standard for circular threaded connectors, distinct from MIL-DTL-38999 / GJB599, MIL-DTL-27484 (MS27484), MIL-DTL-27497 (MS27497), and MIL-DTL-27508 (MS27508), and is not directly form-fit-function interchangeable with D38999/J599 Series III, MS27484, MS27497, or MS27508 connectors unless confirmed by the supplier.

This threaded plug features shell size 11 (approximately equivalent to D38999 shell size B / 11), insert arrangement 11F-35 (13 contacts: 13 x #22D signal, Service Class M - sealed), pin contacts (P), an "L" special variant designation (confirm exact meaning with supplier), and normal keying (N). The "T" style designation indicates a threaded plug. The design supports EMI shielding and removable crimp contacts.

Product Features

• Conformant to JY27466 (GJB) circular connector standard
• NOT directly interchangeable with MIL-DTL-38999 / GJB599 Series III, MIL-DTL-27484 (MS27484), MIL-DTL-27497 (MS27497), or MIL-DTL-27508 (MS27508) connectors unless confirmed by supplier
• Threaded coupling for secure mating retention
• Threaded plug style (T designation) for cable-end or panel-mount applications
• Conductive shell for EMI shielding and corrosion resistance
• Sealed signal configuration with insert arrangement 11F-35: 13 x #22D signal contacts (Service Class M - sealed)
• Pin contacts (P) for mating with socket-contact receptacles
• "L" special variant designation — confirm exact feature meaning with supplier
• Normal keying (N) for standard polarization and anti-mismatch mating

Technical Specifications - JY27466T11F35PLN

Part Number Breakdown

Related options: JY27466T11F35SN plug with socket contacts (without L variant); JY27466T09B35PN for smaller shell size 09 (approx. D38999 size A / 9); JY27466T11F02PN non-sealed power arrangement (Service Class I); JY27466T13F35PLN for larger shell size 13 (approx. D38999 size C / 13). Important: JY27466 (GJB), MS27484 (MIL-DTL-27484), MS27497 (MIL-DTL-27497), MS27508 (MIL-DTL-27508), and D38999/J599 (MIL-DTL-38999/GJB599) are separate standards and are NOT form-fit-function interchangeable unless confirmed by supplier. The "L" suffix meaning must be confirmed with supplier.

Compatible Applications

The JY27466T11F35PLN threaded plug is intended for platforms that require JY27466 (GJB) compliant threaded interconnects with medium-count sealed signal circuits in shell size 11, using pin contacts. Typical use cases include:

• Aircraft and helicopter wiring harness cable ends (JY27466 / GJB standard)
• Avionics LRUs, radar, and communication equipment
• Ground vehicles and rugged electronic enclosures
• Shipboard and outdoor equipment requiring sealed circular connectors
• Programs that standardize on JY27466 (GJB) interfaces

Selection Guide

Installation Notes

• Verify shell size, insert arrangement, contact gender, and normal keying before mating. Confirm the meaning of the "L" variant designation with supplier.
• Use the correct crimp tooling for #22D signal contacts specified by arrangement 11F-35.
• Fully engage the threaded coupling with the mating JY27466 receptacle until securely seated.
• Mate only with JY27466 receptacles of the same shell size, arrangement, opposite contact gender (socket), and normal keying. Note: 11F-35 is Service Class M (sealed) — suitable for applications requiring environmental sealing.
• Do NOT attempt to mate with D38999/J599 Series III, MS27484, MS27497, or MS27508 receptacles — JY27466 is a different standard and is not interchangeable unless confirmed by supplier.

Why Choose JY27466T11F35PLN

JY27466 (GJB) Compliance

Choosing JY27466T11F35PLN ensures compliance with JY27466 (GJB) requirements for programs that mandate this specific standard. The threaded plug geometry supports reliable cable-end interconnect with sealed signal capability, pin contacts, and normal keying for aerospace and industrial systems. Note: this connector is NOT a direct replacement for D38999/J599 Series III, MS27484, MS27497, or MS27508 parts. Confirm exact specifications, "L" variant meaning, and interchangeability with supplier.

Ordering Information

Order by the JY27466 designation JY27466T11F35PLN. When requesting a quote, please confirm mating receptacle part number (socket contacts), shell finish class, contact plating, "L" variant designation meaning, and required quantity. Note: 11F-35 is Service Class M (sealed); specify 11F-02 for non-sealed power applications.