Jiangsu Shengman Drying Equipment Engineering Co., Ltd
| Delivery Time | 60-90 Working Days |
| Inlet Air Temperature | 160-200 °C |
| Final Moisture Control | typically 2-4% |
| Control System | PLC + HMI |
| Heating Source | Electricity / Steam / Gas |
| Payment Terms | T/T |
| Anti-Caking Option | In-line flow-agent dosing |
| Supply Ability | 10 Sets per Month |
| Evaporation Capacity | 50 kg/h water |
| Target Particle Size | 40-120 μm, rounded |
| Post-Dry Cooling | Integrated cooling stage |
| Contact Material | SUS304 |
| Outlet Air Temperature | 90-120 °C |
| Packaging Details | Plywood case with moisture-proof film, reinforced steel frame for sea freight |
| Brand Name | Xin ShengMan |
| Place of Origin | Changzhou, Jiangsu, China |
| Model Number | LPG-60 |
| Certification | CE, ISO 9001:2015 |
View Detail Information
Explore similar products
ZPG Series 150kg/h Spray Drying Machine For Chinese Raditopnal Medicine Extract
500kg/h YPG Series Pressure Spray Dryer Machine With Diaphragm Pump
200kg/h Traditional Chinese Medicine Extract Spray Drying Machine ZPG Series
CE ISO9001 LPG-5 High Speed Centrifugal Spray Drying Machine Small Size
Product Specification
| Delivery Time | 60-90 Working Days | Inlet Air Temperature | 160-200 °C |
| Final Moisture Control | typically 2-4% | Control System | PLC + HMI |
| Heating Source | Electricity / Steam / Gas | Payment Terms | T/T |
| Anti-Caking Option | In-line flow-agent dosing | Supply Ability | 10 Sets per Month |
| Evaporation Capacity | 50 kg/h water | Target Particle Size | 40-120 μm, rounded |
| Post-Dry Cooling | Integrated cooling stage | Contact Material | SUS304 |
| Outlet Air Temperature | 90-120 °C | Packaging Details | Plywood case with moisture-proof film, reinforced steel frame for sea freight |
| Brand Name | Xin ShengMan | Place of Origin | Changzhou, Jiangsu, China |
| Model Number | LPG-60 | Certification | CE, ISO 9001:2015 |
| High Light | Free Flowing Powder Spray Dryer ，Powder Flowability Spray Drying ，Mixing Packaging Ready Powder Dryer | ||
A powder can be perfect on the day it is dried and a problem two days later. If it cakes in the silo or bridges in the hopper, downstream mixing and packaging grind to a halt. A spray drying machine that controls moisture, particle shape and anti-caking behavior delivers powder that stays free-flowing all the way to the pack.
Powder cakes in storage and bridges in hoppers, forcing operators to hammer silos and stop packaging lines.
Poor flow makes dosing inaccurate, so blends come out off-ratio and packs come out underweight.
Sticky, unflowable powder also dusts heavily, creating housekeeping and inhalation problems.
Residual surface moisture makes particles bond under pressure, so a powder that looks dry still cakes in a full silo.
Irregular, coarse and fine particles interlock, and fine fractions migrate to create dense, slow-flowing zones.
Hygroscopic ingredients absorb moisture from the air after drying, triggering caking that has nothing to do with the dryer itself.
The LPG-50 controls final moisture tightly, targeting the level where powder is dry enough to flow but not so dry that fines become airborne.
Uniform 40-120 μm particles with a rounded shape flow by rolling rather than interlocking, which keeps mass flow steady in hoppers.
An optional in-line anti-caking dosing point lets you add a small amount of flow agent before the powder is packed.
A cooling stage brings the powder down before storage, so warm, soft particles do not fuse together in the bag.
It suits spice blends and seasonings that must flow freely through blending and filling lines.
It fits dairy and beverage powders stored in bulk where caking would block silos.
It also serves chemical and detergent powders where accurate volumetric dosing depends on flow.
| Parameter | Specification |
|---|---|
| Evaporation Capacity | 50 kg/h water |
| Inlet Air Temperature | 160-200 °C |
| Outlet Air Temperature | 80-120 °C |
| Target Particle Size | 40-120 μm, rounded |
| Final Moisture Control | typically 2-4% |
| Post-Dry Cooling | Integrated cooling stage |
| Anti-Caking Option | In-line flow-agent dosing |
| Contact Material | SUS304 |
| Control System | PLC + HMI |
| Heating Source | Electricity / Steam / Gas |
Start from your target moisture. Too dry a powder dusts and segregates; too wet a powder cakes. Aim for the middle of your spec.
If your ingredients are hygroscopic, specify the cooling stage and consider an integrated anti-caking dosing point.
For bulk silo storage, prioritise uniform particle shape over the finest possible size, since rounded particles flow best.
Ask for a flowability test on your actual powder if bridging has been a recurring problem.
A: Caking is usually caused by residual surface moisture and hygroscopic pickup, not by overall dryness. Tight moisture control plus a cooling stage and an anti-caking agent solves most cases.
A: Most free-flowing food and flavor powders sit at about 2-4% final moisture. We will tune this to your recipe and storage conditions.
A: Yes. Rounded particles roll and flow, while irregular ones interlock. The wheel atomizer produces the rounded shape that flows best.
A: Yes. An optional in-line dosing point lets you blend a small amount of anti-caking agent before the powder is packed.
Tell us where your powder cakes and how you store it, and we will set up a spray drying machine that delivers stable, free-flowing output.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
10000000-20000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Jiangsu Shengman Drying Equipment Engineering Co.,Ltd, established in 2011, known as a local leading high-tech enterprise, is located in Zhenglu town, Changzhou, Jiangsu, China. Shengman is a large-scale production enterprise in China drying industry with a registered capital of 100,000,000 RMB, spe... Jiangsu Shengman Drying Equipment Engineering Co.,Ltd, established in 2011, known as a local leading high-tech enterprise, is located in Zhenglu town, Changzhou, Jiangsu, China. Shengman is a large-scale production enterprise in China drying industry with a registered capital of 100,000,000 RMB, spe...
Get in touch with us
Leave a Message, we will call you back quickly!