Modular Autopsy System | Tailored Configurations for Specialized Workflows

Product Specification

1. The Philosophy

Traditional dissection tables are passive pieces of furniture. The series is an active partner in the procedure. It is built on three core pillars:

• Containment First: Aggressive source capture of aerosols and vapors.

• Surgeon-Inspired Ergonomics: Adaptable positioning to reduce physical strain during long procedures.

• Forensic-Ready Durability: Materials and construction that withstand the most demanding environments.

2. Advanced Containment Engineering

A. The  Downdraft System

• Negative Pressure Barrier: Unlike simple perforated surfaces, the system utilizes a scientifically designed pattern of laser-cut openings combined with a plenum chamber that creates a uniform negative pressure across the entire table surface. This ensures that formalin vapors (heavier than air) and lighter aerosolized particles are captured immediately.

• High-Capacity Exhaust: Designed for connection to centralized building exhaust or dedicated filtration units. The table features dual 200mm outlets to minimize static pressure loss and ensure quiet, efficient operation.

• Low-Profile Intake: The intake surface is flush with the work area, allowing instruments and specimens to slide easily without catching on raised grates.

B. Filtration Options for Every Facility

• Direct Connect Model: For new construction or facilities with existing exhaust infrastructure.

• Self-Contained Filtration Model: Equipped with a integrated fan/filter module (HEPA + Activated Carbon) for facilities without ductwork. This unit recirculates clean, odor-free air back into the room, offering plug-and-play installation.

3. Metallurgy & Surface Science

• Marine-Grade 316L Stainless Steel: Selected for its superior resistance to pitting and corrosion from chlorides (bleach) and aldehydes (formalin). The table features a 2.5mm thick work surface, ensuring rigidity and resistance to impact.

• Electropolished Finish: Beyond standard brushing, the surface undergoes electropolishing. This electrochemical process removes a microscopic layer of metal, leaving a ultra-smooth, non-stick surface that is significantly easier to clean and more resistant to bacterial adhesion than mechanically polished steel.

• Coved Sanitary Base: The junction between the vertical walls and the horizontal work surface is a seamless, 25mm radius cove. This eliminates the 90-degree angle where biological debris typically accumulates, making the table fully cleanable with a spray jet.

4. Ergonomic Architecture

The Hydraulic System

• Independent Height Adjustment: Range of 650mm to 1050mm, allowing the table to be lowered for seated micro-dissection or raised for standing evisceration.

• Trendelenburg/Reverse Trendelenburg: Tilt up to 12° to facilitate fluid drainage or to shift abdominal contents for better organ access.

• Lateral Tilt (Optional): ±10° side-to-side tilt for specialized procedures or teaching demonstrations.

User-Centric Workflow Features

• Retractable Instrument Tray: A pull-out, perforated stainless steel tray keeps frequently used instruments within easy reach, preventing them from sliding into the work area.

• Height-Adjustable Footrest: Reduces leg fatigue for users who prefer to stand close to the table.

• Articulating Utility Arm: Holds suction tubing, camera cables, or additional lighting exactly where needed, keeping them off the work surface.

  5. Smart Control Interface

  The features a shatterproof, chemical-resistant LCD display that provides:

  • Real-time airflow velocity readings (Pascals)

  • Elapsed procedure timer

  • Water temperature display

  • Filter life indicator (for self-contained models)

  • Service alerts and diagnostic codes

  • 6. Cleaning & Maintenance Protocol

    The series is designed for "Spray-and-Go" sanitation.

    1. Rinse: Use the integrated spray wand to rinse bulk debris toward the central drain.

    2. Disinfect: Spray with hospital-grade disinfectant (phenolic, quaternary ammonium, or bleach solution).

    3. Soak: Allow to dwell for recommended contact time.

    4. Rinse: Final rinse with clean water.

    5. Dry: The smooth, electropolished surface air-dries rapidly without spotting.

    7. Summary of Benefits

    • Uncompromised Safety: Reduces occupational exposure to formaldehyde and biohazards.

    • Superior Construction: 316L stainless steel ensures decades of service life.

    • Enhanced Efficiency: Integrated utilities and ergonomic positioning speed up procedures.

    • Versatility: Multiple models to suit specific institutional needs.

    ---

    Experience the Difference

    We invite you to compare the NecroTech® Precision Autopsy Workstation against any other table on the market. Examine the welds, feel the finish, and test the airflow. We are confident you will choose the precision that only an operating room equipment manufacturer can provide.

    Request a comprehensive quote or specification drawing for your project today.