Smart Automatic Fast Charge Motor Battery Charger Jump Starter Portable Car

Product Specification

Smart Automatic Fast Charge Motor Battery Charger Jump Starter Portable Car Battery Charger Car Jump Starter

Product Introduction:

Our factory specializes in manufacturing the Pulse battery charger, which is specifically tailored to cater to a wide range of battery types. These include lead-acid batteries, maintenance-free batteries, start batteries, start-stop batteries, 12V and 24V batteries, as well as 12.6V lithium batteries.
To ensure precise control over the charging process, our charger incorporates a dedicated intelligent microcomputer chip. This chip enables effective monitoring and management of the charging parameters. The charger utilizes advanced pulse width modulation (PWM) technology, resulting in a compact size that promotes safety and convenience.
Efficiency is a key feature of our Pulse battery charger. It offers high-efficiency conversion, ensuring that the energy input is effectively converted into the desired output for charging the battery. The charger also provides a stable output current, allowing for consistent and reliable charging performance. With its large design capacity, our charger is capable of operating at full load for extended periods, making it a reliable and durable solution.
Environmental sustainability is a core principle behind our Pulse battery charger. It is designed as a next-generation eco-friendly charger, taking into consideration the impact on the environment. By incorporating efficient charging technology, the charger minimizes energy waste and reduces its carbon footprint.
Safety is paramount in our charger's design. It includes multiple protective features to safeguard against potential hazards. These features encompass short-circuit protection, reverse polarity protection, overtemperature protection, and low-voltage protection. These measures help prevent damage to the battery and ensure safe charging operations.
The Pulse battery charger supports various charging states to accommodate different battery requirements. These states include constant current, constant voltage, floating, trickle, and more. By offering a range of charging options, our charger optimizes the charging process, thereby enhancing battery life. Moreover, it effectively reduces the rate of water loss from the battery and eliminates problems associated with battery heating and overcharging.

HAS-L-618D can charge 12.6V lithium batteries.

Overview:

The charger has short-circuit protection, reverse polarity protection, overtemperature protection,and low-voltage protection. It can realize constant current, constant voltage, floating, trickle and other charging states, improving battery life, reducing the rate of battery water loss and eliminate battery heating and drum charging.

HAS-L-618D Adjustable Knob:

For the auxiliary current adjustment button, the real meaning of the current knob is to assist in adjusting the current and replacing the protective battery.

(Batteries below 20AH are recommended to manually adjust the current charge)

Advantage:

Smart mode:

When the user uses it for the first time, make sure that the switch is adjusted to the smart gear for charging. D uring the charging process, the charging current is automatically adjusted according to the battery size and battery status, and the charging is automatically stopped after charging to the set voltage value. This gear is full of self-stops.

Repair Mode:

Only the battery is below 11V voltage, this manual mode is for the battery internal resistance characteristics, professionally designed charging program, help repairing the battery function, so that the battery effect plays better, but the repair mode work must be carried out under manual care, in the battery shell has a slight heat when the repair is stopped. The notification repair time can be up to 1-2hour

Safety Tips

1. It is strictly prohibited to use in damp,high temperature,flammable,explosive objects gas environments.

2. It is strictly prohibited to use this machine in a state where the cooling air hole of the machine is blocked or the fan is damaged and stopped.

3. It is strictly prohibited to charge scrapped,non lead-acid batteries,or batteries without voltage! Do not charge non chargeable batteries! Do not approach open flames while charging! There is high voltage inside the machine and unauthorized disassembly is strictly prohibited.

4. For indoor use, beware of rain. During the charging process,someone must take care of the charger, and it is strictly prohibited to cover it. It must be placed in a well ventilated area for use. It is strictly prohibited to charged in or on a vehicle,and be cautious of flames,sparks,and explosive gases to avoid causing a fire.

5. To charge the battery of the vehicle or equipment, please remove the battery and place it in a safe and flammable environment. Otherwise, if an accident occurs, you will be held responsible.

6. There is high voltage and danger inside the charger. Non professional personnel are strictly prohibited from opening or modifying the machine, otherwise the consequences will be borne by oneself.

7. If the power input cord is damaged, to avoid danger, it must be replaced by the manufacturer, maintenance department, or similar professional personnel.

Before connecting or disconnecting the battery charger from the battery,the power should be disconnected first.

Attention:

1. When the charger is working to charge the battery,the cooling fan must be working properly.

2. Other modes are prohibited when charging the lithium battery to prevent the damage to the lithium battery with different voltage values. 12V lithium battery full charge voltage of 12.6±0.2V; The 24V lithium battery has a full charge voltage of 25.2±0.2V.

3. Charger 12V voltage identification display range 10V-15V,24Vvoltage identification display range in 20V-29V. The full charge voltage of the 12V battery is 14.6±+0.2V; The 24V lithium battery has a full charge voltage of 29.2V±0.4V.

4. The first charge of the leakage battery and the battery below 20AH should be manually monitored, and the appearance of the battery and the battery liquid should be checked to avoid overcharge of the battery and deformation of the drum.

Technical Parameter:

1.Rated input voltage range: 110V-250V; This indicates that the power supply or charger can accept input voltages within the range of 110 volts to 250 volts.

2.Output voltage: 12V/24V;The power supply or charger can provide two different output voltage options, either 12 volts or 24 volts.

3.Rated operating frequency: 50/60Hz;This means that the power supply or charger can operate on both 50 Hz and 60 Hz frequency power sources.

4.Full load conversion efficiency: 93%;This indicates that the power supply or charger has an efficiency of 93% when operating at full load. In other words, it can convert input power to the output power with a minimum energy loss.

5.Operating temperature range: -30°C to 45°C;The power supply or charger is designed to operate within the temperature range of -30 degrees Celsius to 45 degrees Celsius. It can function properly within this temperature range without any significant issues.

6.Charging mode: The charging mode is described as "No load - constant current-constant pressure - float charge - trickle." This suggests that the power supply or charger follows a specific charging algorithm or sequence. It starts with a no-load condition, then applies a constant current to charge the battery until it reaches a certain voltage (constant pressure). Once the battery voltage reaches the desired level, it switches to a float charge mode to maintain the battery at a specific voltage. Finally, it enters the trickle charge mode, which provides a low current to compensate for any self-discharge of the battery.

FAQ:

Q: Why is the current getting smaller and smaller?The current is not 30A.

A: Charging principle: pulse. Pulse can protect the battery and prolong its service life.

The difference is that the pulse charger can keep the charging process dynamic, balance the charging and discharging process, reduce the water loss during the charging process, and prevent the problem of sulfation, so that the battery capacity can be restored and the battery life will be increased.

Pulse is not a constant voltage and current. It will match the charging voltage and current according to the battery status. The charging current will become smaller and smaller as the battery power increases.

The pulse is designed to better protect the battery from being injured due to overcharge.

Not all batteries can reach the peak current. If the battery capacity is large and the power loss is severe, the current will be higher.

Q: Are 12V/24V and lithium battery automatically compatible?

A: 1. Manual selection is required; 2. 12V/24V self-defined identification, lead-acid battery, water battery, dry battery. 3. Lithium battery: 12V, lithium iron phosphate battery cannot be charged (it depends on whether the charger supports 12.6V lithium battery)

Q: How to operate?

A: The first step is to check whether the battery is good or bad. Operation method: the charger is not plugged in, just clip the charger clip to the positive and negative poles of the battery. The display will show the current internal pressure of the battery. There are two conditions not shown: 1. Charger problem 2. Battery voltage is lower than 8V.

The second step is that the charger has normal input and output. Only plug in, and the display will be on. By default, 12V and POWER are on. When the red and black clips meet, the spark charger is completely normal.

Q:What is the differences between chargers?

A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.

Q: What is the function of the charger?

A:1. Check the internal pressure of the battery; 2. Repair; 3. Charging.

Q: Why can't the battery reach the current you said?

A: Generally, the battery capacity is not large enough to give all the output current to the battery. I'm afraid that the battery can't bear it, which will make the battery damage.

P.S. Most of the batteries that need to be recharged with chargers have some problems

Q: Why cant the two 12V series connection recognize 24V for charging?

A: If the battery is a combination of two 12V batteries and can not directly identify the 24V charging, the internal pressure of the two batteries can be detected separately, and the large difference is unrecognizable. Two 12V batteries need to be charged separately

Q: Why does the display screen not light after plugging in?

A: 1.Plug in only, the display screen is not on, and the indicator light is not on. The safety tube is burnt and the product is defective

2.The 12V and power indicators are on. It may be that the display cable is loose. Maybe the display screen is broken

HAS-L-618D can charge 12.6V lithium batteries.