Exporters Bidirectional Tilt Driving Head – Exporters Low Headroom Operation

The SV-400 is a Custom side grip pile driver designed for 32–40 ton excavators, specifically engineered to work in low headroom and confined spaces. As a High Quality side grip pile driver, it features a precision‑machined slewing ring, German bearings, and an imported hydraulic motor – ensuring long‑term reliability. This model is currently a Side grip pile driver Hot Sale item, widely used for driving steel sheet piles, H‑beams, and circular pipes under bridges, inside factories, and along railway lines. We are proud Exporters bidirectional tilt driving head – the SV‑400 offers ±30° tilt in two directions, allowing batter piles and slope compensation without repositioning the excavator. Additionally, as Exporters low headroom operation capability, the SV‑400’s total height (including clamp) is only 3056 mm, enabling work in vertical clearances as low as 3.5–4 meters. One machine completes clamping, positioning, driving, and extraction – no auxiliary equipment needed. With a centrifugal force of 656 kN, frequency range of 2300–5000 rpm, side clamp force of 465 kN, and bottom clamp force of 520 kN, the SV‑400 delivers exceptional power in a compact, low‑profile package.

Additional specifications from the catalog (SV-400):

• Eccentric moment: 6.6 kgm
• Centrifugal force: 656 kN
• Frequency range: 2300–5000 rpm (adjustable)
• Side clamp force: 465 kN | Bottom clamp force: 520 kN
• Working pressure: 32 MPa | Flow: 280–360 L/min
• Rotation: 360° continuous | Tilt: ±30° bidirectional
• Dimensions (L×W×H): 1400×1315×3056 mm
• Weight (incl. connector & clamp): 3870 kg
• Suitable excavator: 32–40 tons

Southeast Asia (bridge widening, factory extensions, tunnel construction)

• Exporters low headroom operation capability – essential for working under existing elevated highways in Bangkok, Jakarta, and Manila.
• Custom side grip pile driver – we can tailor the clamp to fit local pile profiles (e.g., Thai Z‑type sheet piles).
• Side grip pile driver Hot Sale – rapid delivery to Vietnam, Indonesia, and the Philippines.

India (flyover under‑deck work, metro rail, industrial sheds)

• High Quality side grip pile driver – robust construction withstands the mixed ground and long working hours of Indian infrastructure sites.
• Exporters bidirectional tilt driving head – easily compensates for uneven terrain on bridge approach roads.
• Custom mounting brackets available for various Indian excavator brands (Sany, JCB,Hitachi).

Russia (industrial plants, bridge repairs, confined winter enclosures)

• Exporters low headroom operation capability – works inside heated temporary enclosures with limited height.
• High Quality components with low‑temperature seals and grease operate reliably down to -30°C.
• Custom side grip pile driver – we can add remote control or heated hydraulic circuits for extreme cold.

A: It means we can modify the SV‑400 to your exact needs – special clamp jaws for non‑standard piles, extended tilt angle beyond ±30°, or a specific adapter plate to fit your excavator’s quick coupler. Contact our engineering team with your requirements.

A: We use German FAG bearings, original Parker hydraulic motors, and high‑strength fabricated steel. The slewing ring is precision‑ground with zero backlash. Every unit undergoes a 2‑hour test run before shipping. That’s High Quality.

A: Yes – we have sold over 200 units of the SV‑400 in the past 12 months, primarily to bridge and factory contractors. Its ability to work in just 3.5 m vertical clearance with 656 kN of force is unmatched. Check our customer references.

A: We ship the SV‑400 to more than 20 countries. The bidirectional tilt driving head allows you to tilt the hammer ±30° left/right or forward/backward (depending on mounting orientation). This is critical for batter piles, sloping sites, or aligning with pre‑drilled holes.

A: Traditional pile drivers need 6–8 m of vertical clearance. The SV‑400’s total height is only 3056 mm, so you can drive piles under a bridge with just 3.5 m of headroom. As Exporters of this capability, we provide documentation and training to help you maximize low‑clearance sites.

A: 32–40 ton excavators such as Komatsu PC360‑PC400, Hitachi ZX350‑ZX400, Sany SY335‑SY395, etc. Flow requirement: 280–360 L/min at 32 MPa.

A: Yes, using the bidirectional tilt driving head. You can set the tilt angle from the cab. This is especially useful for sheet piling on slopes or for retaining walls.

A: Lower frequency (2300 rpm) for loose, soft soils to prevent over‑liquefaction; higher frequency (up to 5000 rpm) for dense, compacted soils to increase penetration speed. The wide range makes the SV‑400 adaptable to almost any ground condition.

A: As a Custom side grip pile driver manufacturer, we stock all wear parts (clamp jaws, seals, hoses, bearings) at our Shanghai and Suzhou warehouses. Express shipping worldwide within 3–5 days.