40L/Min Danfoss Omm Motor OMM50151G0013 Hydraulic Orbital Motor 100% New

Product Specification

Danfoss OMM50151G0013 Hydraulic Orbital Motor High Safety 100% New Original

Product Description:

Advantages and features of Danfoss cycloidal motors and precautions for use

‌1. Advantages and features‌

‌High efficiency and high torque design‌

Adopting ‌Geroler™ technology‌ and ‌toothed stator and rotor pair‌, the mechanical efficiency is as high as ‌90%‌ or more, and the low-speed stability is excellent (the minimum speed can reach 15 rpm), which can meet the high torque output requirements (such as the maximum torque of 25Nm for the OMTS 250 model).

Optimized flow distribution mechanism (axial flow distribution or disc flow distribution), with automatic wear compensation function, can still maintain accuracy after long-term operation.

‌Compact, light and highly adaptable‌

Small size and light weight (such as the compact design of OMTS 250), suitable for space-constrained scenes such as forklifts and aerial work vehicles.

Supports a variety of flanges, output shafts and oil port forms, can be installed horizontally or vertically, compatible with open-loop/closed-loop hydraulic systems and different hydraulic media (such as mineral oil, bio-oil).

‌High reliability and long life‌

Core components are made of wear-resistant alloy materials (such as needle bearings and corrosion-resistant gear rings), which can withstand high pressure (≤25MPa) and extreme working conditions (such as dust and vibration), and the leakage rate is less than 0.1%.

Some models integrate brakes or speed sensors to support precise control and safety protection.

‌Flexible functional scalability‌

Can be used in series or parallel, supporting multi-motor collaboration (such as multi-actuators for construction machinery).

Provide customized designs such as low leakage and wheel-side motors, suitable for scenarios such as material handling and special vehicles.

‌II. Precautions for use‌

‌Media and filtration requirements‌

The cleanliness of the hydraulic oil must reach ‌ISO 18/15‌ or above, and the system must be equipped with a ‌10μm grade filter‌ to prevent particulate matter from wearing the stator and rotor pairs.

It is recommended to use hydraulic oil with a viscosity of ‌15-46cSt‌, and high viscosity (＞46cSt) or media containing fiber impurities are prohibited.

‌Installation and startup specifications‌

During installation, the pipeline must be aligned to avoid external force twisting the valve body; before the first startup, it must be run at no load for 10-15 minutes and thoroughly exhausted.

When used in series, an external oil drain pipeline must be connected to prevent internal pressure accumulation.

‌Operation and maintenance‌

Avoid long-term ‌half-open state‌ or frequent start and stop. It is recommended to use a proportional valve to optimize flow regulation and reduce mechanical wear.

Check the oil contamination every ‌500 hours‌ and replace the seals regularly (fluororubber material is recommended, and the replacement cycle is 1-2 years).

‌Prohibited scenarios‌

It is prohibited to use in ‌corrosive media‌ or ‌hydrogen environment‌ to prevent metal parts from oxidizing or sealing failure.

Not suitable for hydraulic circuits without a filtration system‌ or ‌low pressure instability‌.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.