YD05-016 0.5T Low Transmission Jack Adaptor Webpage Detail Page(English)

I. Product Specifications (SPECIFICATION)

II. Product Details (PRODUCT DETAILS)

1. 0.5T Load-Bearing + High-Strength Bracket, Stable Support for Small and Medium-Sized Power Components
   The adapter bracket is integrally stamped from Q235 cold-rolled steel plates, with key parts reinforced by bending, and a tensile strength of 375MPa. The maximum deformation of the bracket is only 0.1mm under 500kg rated load, which can stably support family car transmissions (about 120-250kg), small-sized light truck transmissions (about 180-350kg) and low-chassis vehicle differentials (≤500kg); the bracket surface is treated with phosphating rust removal + electrostatic painting, with a coating thickness of 60μm, no rust in the 48-hour salt spray test, and no rust or corrosion even in long-term contact with transmission oil stains, with a service life of more than 8 years.
2. Universal Adapter Structure, Most Floor Jacks Can Be Upgraded
   The innovative design fits most standard floor jacks (e.g., common 2T, 3T household/auto repair floor jacks) with removable saddles and 1-3/16 inch hole in the saddle. There is no need to replace the main body of the floor jack; the floor jack can be transformed into a dedicated transmission jack only through the adapter bracket. The transformation cost is only 1/3 of purchasing a dedicated transmission jack, greatly reducing equipment investment; the bottom of the adapter bracket is equipped with 3-speed positioning buckles, which can fine-tune the height according to the thickness of the floor jack saddle to ensure horizontal load-bearing after installation, with an adaptation rate of more than 90% for common floor jack models.
3. Screw Hook Safety Chain, Anti-Slip Fixation for More Security
   Equipped with 1 high-strength manganese steel safety chain (single chain load-bearing ≥600kg), the end of the chain is designed with a screw hook that can be manually rotated to tighten, closely fitting the transmission housing and then buckled and fixed, with a lateral shaking of ≤0.5°, completely eliminating the risk of component slipping during lifting or maintenance; the chain length can be freely adjusted (up to 1.2 meters) to fit transmissions/differentials of different sizes. Combined with the 5mm thick anti-slip rubber pad (friction coefficient ≥0.95) on the bracket surface, it forms a double protection of "bracket anti-slip + chain fixation", and the safety factor is increased by 150% compared with the unprotected adapter scheme.
4. Lightweight Design + Manual Installation, Convenient and Easy to Operate
   With a net weight of only 9kg, it can be easily carried and installed by one person without professional tools: Remove the original saddle of the floor jack (1-2 minutes) → Align the hole to install the adapter bracket (fixed with buckles, 30 seconds) → Attach and tighten the safety chain (1 minute), and the entire transformation can be completed within 3 minutes; the adapter bracket is compact (package size 45x24x15cm) and can be stored separately in a tool cabinet when not in use, without occupying too much space, adapting to the needs of "flexible switching of maintenance scenarios and limited space".

III. Application Scenarios (APPLICATION SCENARIOS)

1. Family Car Transmission Maintenance in Community Auto Maintenance Stores
   When community auto maintenance stores replace transmissions for family cars (e.g., Toyota Corolla, Volkswagen Lavida), there is no need to purchase a dedicated transmission jack; they only need to adapt YD05-016 to the existing 2T floor jack; the 500kg load-bearing capacity fully covers the weight of the car transmission (about 200kg). After fixing the safety chain, manually adjust the jack height to the maintenance position, and the disassembly and assembly can be completed by one person, reducing equipment investment cost by 60%, adapting to the needs of "low-cost and efficient maintenance".
2. Home Maintenance by Individual Auto Repair Enthusiasts
   When individuals replace transmission oil for their own cars (e.g., Honda Civic, Nissan Sylphy), they use the existing household floor jack (e.g., 1.5T model) with YD05-016; after quick installation of the adapter bracket, the safety chain fixes the transmission, and the height is slowly adjusted to make the transmission oil drain port face down, accurately controlling the oil drain speed, solving the pain point of "individuals without dedicated transmission jacks and inconvenient maintenance", adapting to the "low-cost home maintenance" scenario.
3. Small Component Maintenance of Light Trucks in Small Repair Shops
   When small repair shops maintain small-sized differentials (about 300kg) for light trucks (e.g., Wuling Rongguang New Truck, Foton Xiangling V1), they adapt it to the 3T floor jack; the 1-3/16 inch hole accurately connects to the jack saddle, and after tightening the safety chain, the differential is smoothly lifted to a height convenient for operation, avoiding maintenance delays caused by insufficient dedicated equipment, adapting to the "flexible equipment upgrading for small repair shops" scenario.
4. Power Debugging of Low-Chassis Vehicles in Auto Beauty Shops
   When auto beauty shops debug the transmission drive clearance of low-chassis vehicles (e.g., modified Honda Fit, Volkswagen Lamando L), they transform the floor jack into a low-profile transmission jack through the adapter bracket; the 24cm wide adapter bracket can easily reach under the low chassis, the anti-slip pad fits the transmission housing, and the safety chain prevents component deviation during debugging, adapting to the "beauty shops also undertaking simple maintenance and debugging" scenario and expanding business scope.

IV. Frequently Asked Questions (FAQ)

Q1:How to confirm if the floor jack at home is compatible with this adapter?

Q2:The screw hook of the safety chain cannot fit tightly to the irregularly shaped transmission housing. How to handle this?

Q3:After long-term use, the connection between the adapter bracket and the jack saddle becomes loose. How