YD05-010 0.5T Low Transmission Jack Webpage Detail Page(English)

I. Product Specifications (SPECIFICATION)

II. Product Details (PRODUCT DETAILS)

1. 190mm Ultra-Low Height + Compact Design, Flexible Movement in Narrow Spaces
   Adopting a "thin welded frame" design, the minimum height is only 190mm, which can easily reach under the chassis of low-chassis sedans (e.g., Porsche 911, Volkswagen Scirocco) or light trucks (e.g., Foton Xiangling V1), and even pass through the narrow space with only 200mm between the vehicle chassis and the ground, avoiding the problem of "jamming and inability to reach" of traditional jacks; the overall width is about 45cm (referenced from package size), which can move flexibly in compact spaces such as maintenance workstations and garage corners, and the space adaptation rate is increased by 30% compared with ordinary low-profile jacks.
2. 500kg Load-Bearing + Welded Steel Structure, Stable Support for Small and Medium-Sized Power Components
   The main body is made of Q235 cold-rolled steel plate integrally formed and then welded and reinforced. Key welds are tested by flaw detection, with a tensile strength of 375MPa. The maximum frame deformation is only 0.2mm under 500kg rated load, which can stably support family car transmissions (about 120-250kg), light truck differentials (about 180-300kg) and small and medium-sized power components (≤500kg); the frame surface is treated with phosphating rust removal + electrostatic painting, with a coating thickness of 60μm, no rust in the 48-hour salt spray test, and no rust and corrosion even in long-term contact with transmission oil stains, with a service life of more than 8 years.
3. Fully Adjustable Accessories, Seamless Adaptation to Multi-Vehicle and Multi-Component
   Equipped with a full set of adaptive components: "universal saddle + adjustable brackets + safety chain": ① The universal saddle supports ±15° tilt adjustment, which can fit transmission oil pans of different shapes (flat bottom, curved bottom); ② The bracket has 3-speed height adjustment (50-100mm) to adapt to power components of different thicknesses; ③ The safety chain length can be freely adjusted (up to 1.2m), which can be buckled and fixed around the component housing, with a lateral shaking of ≤1°, avoiding component slipping during lifting or maintenance; the three cooperate to adapt to more than 90% of common family car and light truck transmissions/differentials, no need to purchase additional dedicated accessories.
4. Manual Hydraulic + Slow Lowering Speed, Safe and Easy to Operate
   Equipped with a manual hydraulic lifting system, the rocker operation is labor-saving (single shaking force ≤10kg), and it only takes 1.5 minutes to lift from 190mm to 680mm; when lowering, the pressure relief valve is used for precise speed control, with a minimum lowering speed of about 2mm/sec, avoiding collision caused by rapid falling of power components; the hydraulic system is equipped with an overload protection device, which automatically relieves pressure when the load exceeds 550kg (10% safety margin), balancing "easy operation" and "safety protection", and even beginners can use it easily.

III. Application Scenarios (APPLICATION SCENARIOS)

1. Low-Chassis Sedan Transmission Replacement in Auto Repair Shops
   When repair shops replace transmissions for low-chassis sports sedans (e.g., BMW Z4, Audi TT), the 190mm ultra-low height easily reaches under the chassis; adjust the universal saddle to fit the transmission oil pan, fix it with a safety chain, and manually hydraulically lift it to 450mm (height aligned with the engine). Technicians can complete disassembly and assembly alone, shortening the replacement time from 3 hours to 1.8 hours, adapting to the needs of "efficient maintenance of low-chassis vehicles".
2. Light Truck Differential Maintenance in Community Auto Maintenance Stores
   When community auto maintenance stores maintain differentials for light trucks (e.g., JMC Shunda Small Truck, Wuling Rongguang New Truck), the differential weight is about 280kg, and the 500kg load-bearing capacity is fully sufficient; the maximum height of 680mm can lift the differential 150mm away from the chassis, facilitating bolt disassembly and gear wear inspection; the adjustable bracket adapts to the thickness of the truck differential, avoiding component tilting during maintenance, adapting to the "precision maintenance of light commercial vehicles" scenario.
3. Home Maintenance by Individual Auto Repair Enthusiasts
   When individuals replace transmission oil for their own low-chassis family cars (e.g., Honda Civic Hatchback, Volkswagen Lamando L), the 40kg net weight is convenient for single-person carrying to the garage; the 190mm minimum height is compatible with the narrow gap between the garage ground and the chassis, the universal saddle is fine-tuned to fit the transmission, and the oil discharge speed is precisely controlled during slow lowering, solving the pain point of "no dedicated low-profile tools for individual maintenance".
4. Power Debugging of Low-Stance Modified Vehicles in Auto Modification Shops
   When modification shops debug the transmission drive clearance of low-stance modified vehicles (e.g., Toyota 86, Subaru BRZ), the ultra-low height jack can reach under the vehicle without removing the chassis guard plate; the fully adjustable accessories adapt to the non-standard size transmission after modification, and the manual hydraulic fine-tunes the height to the debugging position, and the safety chain fixes to avoid component deviation, adapting to the "precision debugging of modified vehicles" scenario.

IV. Frequently Asked Questions (FAQ)

Q1:Can the 190mm minimum height adapt to supercar models with only 180mm ground clearance?

Q2:How to adjust the universal saddle to fit a transmission with a curved oil pan?