Product Specification

YD05-004 0.5Ton Transmission Jack Webpage Detail Page(English)

I. Product Specifications (SPECIFICATION)

II. Product Details (PRODUCT DETAILS)

1. 500kg Load-Bearing + 2-Stage Hydraulic Ram, Powerful and Efficient:The wide-base and load-bearing frame are made of Q345 low-carbon steel, and the main ram is high-polished and chrome-plated (plating thickness 20μm), which is rust-resistant and smooth; the 2-stage hydraulic structure enables "fast lifting" — each step of the foot pump lifts 8mm, and it only takes 2 minutes to lift from 855mm to 1760mm (ordinary single-stage rams take 4 minutes), with efficiency doubled; under 500kg rated load, the maximum oil leakage of the ram is ≤0.1ml/hour, and the frame deformation is ≤0.2mm, which can stably support automatic transmissions of family cars (about 180-280kg) and compact SUV transmissions (about 250-480kg), with no performance degradation during long-term use.
2. 360×276mm 4way Tilt Platform, Precise Adaptation Without Dead Ends:The platform area is 0.1㎡ (360×276mm), 44% larger than the ordinary 250×200mm platform, which can directly carry larger-size transmissions (e.g., Volkswagen DSG 7-speed, Honda CVT); it supports 4way adjustment (Forward 23°, Backward 16°, Lateral 7°), which can adapt to the installation angles of transmissions of different models — for example, when maintaining front-wheel drive sedans, forward tilt 23° fits the transmission's inclined layout; when maintaining rear-wheel drive models, backward tilt 16° aligns with the engine interface, no additional wooden pads are needed, and the fit between the platform and the transmission reaches 99%, with bolt hole alignment error ≤1mm during disassembly and assembly.
3. Foot Lift + Manual Slow Lower, Dual Safety Guarantee for Operation:Innovative "foot pump fast lift + manual release lever slow lower" design — step on the foot pump to lift quickly, which is labor-saving and efficient; lower by controlling the manual release lever, the smaller the rotation range, the slower the lowering speed (minimum 0.5mm/sec), avoiding transmission collision caused by "fast lowering once loosened" of traditional pressure relief valves; the platform edge is equipped with 4 corner brackets, and with 2 high-strength safety chains (single chain load-bearing ≥350kg), the lateral shaking of the transmission is ≤0.5° after fastening, and double protection prevents slipping risks.
4. Wide-Base + Steel Castors, Balancing Stability and Mobility Without Occupying Space:The 690×780mm wide-base has a support area of 0.54㎡, and the base overturning coefficient is ≤0.2 under 500kg load, far exceeding the industry safety standard of 0.5, with no tipping risk even during tilt operation; the bottom is equipped with 4 full-swivel ball bearing castors (70mm wheel diameter, 2 with brakes), with pushing resistance ≤8N, which can move flexibly at 360° in the maintenance workshop, and the anti-slip coefficient is ≥0.95 after brake locking; the whole machine can be placed against the wall when stored, with a carton size of only 550×270×780mm, occupying 30% less space than traditional wide-base jacks, adapting to the needs of "multi-workstation scheduling + compact storage" in repair shops.

III. Application Scenarios (APPLICATION SCENARIOS)

1. Family Car Transmission Replacement in Auto Repair Shops:When repair shops replace automatic transmissions for family cars (e.g., Toyota Camry, Honda Accord), the 500kg load-bearing capacity fully covers the weight; the foot pump quickly lifts the platform to 1500mm (height aligned with the engine), adjusts the platform to forward tilt 23° to fit the transmission's inclined layout, and after fixing with safety chains, technicians can complete bolt disassembly and assembly alone, shortening the replacement time from 3.5 hours to 2 hours, adapting to the needs of "efficient batch maintenance".
2. Compact SUV Transmission Maintenance in Chain Auto Maintenance Stores:When chain auto maintenance stores repair transmissions for compact SUVs (e.g., Haval H6, Changan CS75 PLUS), the transmission weight is about 450kg, and the wide-base provides stable support; adjust the platform to lateral tilt 7° to avoid SUV chassis protrusions, lift to 1600mm to facilitate valve body disassembly and gear set inspection; lower by controlling the manual release lever slowly to avoid transmission collision with the chassis, adapting to the scenario of "precise maintenance and safe operation".
3. Home Maintenance by Individual Auto Repair Enthusiasts:When individuals replace transmission oil for their own cars (e.g., Nissan Sylphy, Volkswagen Lavida), the 61kg net weight can be carried to the garage by two people; the minimum height of 855mm is compatible with the distance from the garage ground to the chassis, the 4way tilt platform is fine-tuned to the angle convenient for oil draining, and manual slow lowering avoids oil splashing, solving the pain point of "no professional safety tools for individual maintenance" and making home maintenance more secure.
4. Teaching Practice in Auto Repair Training Institutions:When institutions use it for transmission disassembly and assembly teaching, the 4way tilt platform can intuitively demonstrate the adaptation methods of transmissions of different models; the operation logic of foot lift + manual lower is convenient for students to master safe operation skills; the protective design of safety chains and corner brackets can avoid equipment damage caused by students' operation errors, adapting to the scenario

5.