Product Specification

YD04-005 2000LB ENGINE STAND WITH GEARBOX Webpage Detail Page(English)

I. Product Specifications (SPECIFICATION)

II. Product Details (PRODUCT DETAILS)

1. 2000LB Ultra-Load-Bearing + High-Grade Steel Structure, Stable Support for Heavy Components:The overall frame is made of high-grade industrial steel. The lower 60×60mm steel tube and column 70×70mm steel tube are both thickened (wall thickness 5mm), with a tensile strength of 490MPa. The maximum deformation of the frame is only 0.3mm under 2000LB rated load, which can easily support 8-cylinder light truck engines (about 700-850kg) and large commercial vehicle transmissions (about 500-700kg); compared with ordinary frames, the heavy-gauge tubular structure has a 60% higher bending resistance, no structural fatigue risk even with long-term high-frequency maintenance, and a service life of more than 10 years.
2. 40:1 Gearbox + 360° Rotation, Labor-Saving Precise Angle Adjustment:Innovatively equipped with a gearbox transmission mechanism with a gear ratio of 40:1 — while a 普通支架 requires 50kg thrust to rotate a 900kg engine, this stand only needs 1.25kg to rotate easily, greatly reducing operating intensity; the head supports 360° free rotation, and with gearbox fine adjustment, it can be accurately positioned to any maintenance angle (e.g., 25° tilt when disassembling the cylinder block, horizontal fixation when inspecting gears), with an angle adjustment accuracy of ±1°, avoiding the problem of "overshoot rotation and inaccurate positioning" of traditional stands, and maintenance efficiency is increased by 50%.
3. Lead-Free Anti-Rust Coating + Anti-Fouling Design, Easy to Clean and More Durable:The surface is treated with a dual process of "chemical cleaning → lead-free painting", with a coating thickness of 80μm, no rust in the 72-hour salt spray test, and no paint peeling or frame rust even after long-term use in oily and humid maintenance environments; the paint layer has oil-resistant, grease-resistant and dirt-resistant properties. After maintenance, the surface dirt can be cleaned by simply wiping with a rag dipped in diesel, no professional cleaning agents are needed, and daily maintenance costs are reduced by 40%.
4. 4-Arm Adjustable + Industrial Castors, Multi-Adaptation and Easy Movement:The mounting head is equipped with 4 independent adjustable mounting arms, with an arm length adjustment range of 0-30cm. Each arm is equipped with multiple sets of bolt holes, which can be freely adapted according to the bolt hole positions of the engine/transmission, with an adaptation rate of more than 98% (e.g., compatible with high-power engines such as Ford 7.3L V8 and General Motors 6.6L Duramax); the bottom is equipped with 4 industrial-grade steel castors with a diameter of 90mm (2 with brakes), and the pushing resistance is ≤10N when carrying a fully loaded stand. It can be easily moved to any workstation in the maintenance workshop. After brake locking, the anti-slip coefficient is ≥0.95, with no sliding risk.

III. Application Scenarios (APPLICATION SCENARIOS)

1. Heavy-Duty Truck Engine Overhaul in Auto Repair Shops:When repair shops maintain 8-cylinder engines for light trucks (e.g., Foton Ollin, JMC Kaiyun), the engine weight is about 800kg, and the 2000LB load-bearing capacity of the stand is fully sufficient; the 40:1 gearbox easily rotates the engine to the upward cylinder block angle, the 4-arm adjustable mounting head is accurately fixed, the castors are pushed to the maintenance trench, and the 1050mm center height is compatible with trench operations. Technicians can complete cylinder head disassembly and piston replacement without bending over, adapting to the needs of "heavy maintenance + efficient operation".
2. Transmission Specialized Maintenance in Commercial Vehicle Repair Stations:When bus and logistics fleet repair stations overhaul transmissions for large buses (e.g., Yutong T7) and heavy-duty trucks, the transmission weight is about 650kg, and the stand can support it stably; 360° rotation combined with gearbox fine adjustment can rotate the transmission gear set to a fully exposed angle, facilitating inspection of planetary gear wear and replacement of clutch plates; the oil-resistant coating prevents transmission oil from contaminating the stand, and it is easy to clean after maintenance, adapting to the scenario of "precise maintenance + easy maintenance".
3. Power Component Maintenance in Engineering Machinery Workshops:When mining and infrastructure on-site maintenance workshops maintain excavator and loader engines, the engine weight is about 850kg, and the ultra-load-bearing performance of the stand can support it stably; the industrial castors adapt to the rough construction site ground, push to the temporary maintenance platform and lock the brakes, and adjust the engine angle to the maintenance position through the gearbox (e.g., 30° tilt when replacing the oil pump), solving the pain point of "no professional tools for field heavy component maintenance".
4. High-Power Engine Assembly in Auto Modification Shops:When modification shops assemble high-performance 8-cylinder engines (e.g., Chevrolet LS3, Ford Coyote) for off-road racing cars and heavy pickups, the stand's 4-arm adjustable mounting head adapts to the engine bolt holes, the 40:1 gearbox assists