Product Specification
|
|
|
|
| Payment Terms |
T/T |
Supply Ability |
500PCS/MONTH |
| Delivery Time |
30-45DAYS |
Packaging Details |
Carton Box or Crate |
| Model No. |
YD32-011 (2-in-1 Multi-Functional Tool) |
Working Pressure |
60-100 PSi (4.14-6.89 bar) |
| Nozzle/Fitting |
4 brass nozzle modes (Jet/Fan/Mist/Shower) |
Capacity |
1500 mL water tank |
| Air Inlet |
G1/4" standard interface |
Weight |
1.2kg |
| Brand Name |
YEEDA |
Model Number |
YD32-011 |
| Certification |
CE |
Place of Origin |
Zhejiang，China |
| High Light |
2-in-1 water and grease gun
，60-100PSI water gun for auto maintenance
，3000PSI grease gun for factory use
|
- Fill the Water Tank: Pour clean water or neutral cleaning agent (no more than 1500mL capacity), and tighten the tank lid;
2. Connect Air Source: Connect the G1/4" air hose to the air compressor (displacement ≥0.3m³/min), adjust the air pressure to 60-100 PSi;
3. Select Water Flow Mode: Rotate the nozzle to switch between jet/fan modes, aim at the area to be cleaned and press the trigger to spray;
#### (2) Grease Gun Mode Operation - Fill Grease: Unscrew the grease cylinder lid, fill with 00#-2# lubricating grease (no more than 500mL capacity), and discharge air from the cylinder;
2. Connect Grease Fitting: Align the 4.5mm standard grease fitting with the workpiece grease hole (e.g., bearing oil filling port);
3. Manual Pressurization: Repeatedly press the push rod handle until grease flows out evenly (observe the grease output, no bubbles indicate normal operation).|
Centered on "multi-functional integration + scenario-based optimization", the YD32-011 2-in-1 Tool optimizes for the high-frequency "cleaning + lubrication" needs in maintenance scenarios, achieving efficient collaboration between dual functions. Its core advantages are as follows:
Compared with traditional "water gun + grease gun" (two separate tools), this product enables function switching via quick buckles:
- Switching Logic: After cleaning the equipment surface, remove the water gun tank module and snap on the grease gun cylinder to immediately inject grease into bearings and gears. There is no need to carry two sets of tools back and forth on-site (e.g., when a logistics fleet maintains a truck, it can complete chassis cleaning + wheel bearing lubrication under the vehicle in one go);
- Storage Advantage: The volume of one 2-in-1 tool is only 60% of two single-function tools, saving 40% of storage space in repair shop drawers and truck toolboxes. It is also more portable for outdoor operations (weighing 1.3kg, 0.8kg lighter than two separate tools).
The water gun and grease gun modules adopt independent flow channel designs:
- When using the water gun, water flow only circulates in the water gun pipeline and will not penetrate into the grease components;
- When injecting grease, the one-way valve prevents grease backflow, and the metal grease cylinder is isolated from the plastic main body to avoid grease corrosion of water gun parts. The service life of both functions is equivalent to that of single-function tools (up to 2 years or more with normal use).
- High-Pressure Jet Mode: Under 100 PSi air pressure, the water flow impact force reaches 1.8N, which can quickly remove oil stains on auto chassis and cement caking on equipment surfaces (e.g., dust on construction machinery shells). It cleans 0.5㎡ per minute (50% more efficient than low-pressure water guns);
- Low-Pressure Protection Design: The 60 PSi low-pressure mode is suitable for cleaning fine components (e.g., engine compartment wiring harnesses, electronic component surfaces). The mist/shower modes have gentle water flow, avoiding damage to fragile parts (e.g., plastic buckles, rubber hoses) caused by high pressure.
The 1500mL water tank can meet the needs of cleaning the entire body of a family car (including the body + wheels) without refilling midway. The high-transparency design allows real-time observation of water volume to avoid "dry firing" (no water flow can be driven by air pressure when the tank is empty, protecting internal pneumatic components). The tank lid is equipped with a vent valve that automatically exhausts when adding water, preventing liquid splashing when opening the lid.
The 3000 PSi output pressure can easily push 2# high-viscosity lubricating grease (which can also flow smoothly in low-temperature environments). Compared with ordinary manual grease guns (2000 PSi), it can penetrate into the internal gaps of bearings (e.g., truck wheel bearings), increasing lubrication coverage by 30% and reducing mechanical wear (extending bearing service life by 20%).
The 500mL grease cylinder can hold about 600g of grease, meeting the lubrication needs of 10 standard bearings (50mm diameter). It reduces refilling frequency by 40% compared with 300mL small-capacity grease guns. The chromed push rod is equipped with an anti-slip handle, and the pressing force per time is only 80N (equivalent to lifting an 8kg object). There is no hand soreness even after 10 minutes of continuous injection, suitable for long-term bulk lubrication operations.
Scenario Requirement: An auto repair shop performs "seasonal maintenance" on 10 family cars (including body cleaning + chassis bearing lubrication) using the YD32-011 2-in-1 tool. The water gun mode uses a 0.3m³/min air compressor (80 PSi pressure), and the grease gun mode uses 1# lubricating grease.
Operation Process:
- Vehicle Cleaning (Water Gun Mode):
- Add 1500mL clean water + neutral car wash fluid, adjust to fan mode to clean the car body (5 minutes per car), and switch to jet mode to rinse stubborn stains on wheels;
2. Bearing Lubrication (Grease Gun Mode):
- Remove the water tank, install the grease cylinder (filled with 500mL 1# grease), align with the wheel bearing grease fitting, and press the push rod to inject (1 minute per bearing);
3. Tool Storage: After cleaning, disassemble the water gun and grease gun modules, wipe dry and store (no liquid residue to avoid rust).
Result: Maintenance of 10 cars is completed in only 2 hours (3 hours with traditional two tools), saving 40% of tool switching time. Maintenance technicians report that "no need to fetch tools back and forth, efficiency is significantly improved", and customer satisfaction reaches 95%.
Scenario Requirement: A logistics fleet conducts "pre-long-distance inspection" on 5 freight trucks (including chassis oil stain cleaning + drive shaft bearing lubrication). The water gun mode uses 80 PSi pressure (to rinse chassis oil stains), and the grease gun mode uses 2# high-viscosity grease (compatible with heavy-duty bearings).
Operation Process:
- Chassis Cleaning:
- Add 1500mL clean water + industrial degreaser to the water tank, adjust to jet mode to rinse chassis oil stains (focus on cleaning the drive shaft surface), taking 8 minutes per truck;
2. Bearing Lubrication:
- Switch to grease gun mode, align with the drive shaft bearings and wheel hub bearing oil filling ports, and manually pressurize to inject (6 bearings need lubrication per truck, taking 10 minutes);
3. Emergency Treatment: During the trip, one truck’s wheel hub bearing made abnormal noise. The grease gun mode was used to refill grease on-site, solving the problem in 5 minutes (no need to wait for rescue).
Result: Inspection + emergency treatment of 5 trucks is completed in 2 hours, saving 1.5 hours compared with traditional tools. The bearing temperature drops by 10℃ after grease injection, ensuring safe long-distance transportation.
Scenario Requirement: A factory maintains 10 assembly line motors (including motor housing dust removal + bearing lubrication). The water gun mode uses 60 PSi pressure (mist mode to prevent motor water ingress), and the grease gun mode uses 00# low-viscosity grease (compatible with high-speed motor bearings).
Operation Process:
- Housing Dust Removal:
- Add clean water to the water tank, adjust to mist mode to gently spray the motor housing (to avoid water penetration into the motor), taking 3 minutes per motor;
2. Bearing Lubrication:
- Switch to grease gun mode, fill with 00# grease, align with the motor end cover bearing oil filling port, and press the push rod slowly (2 minutes per motor);
3. Tool Cleaning: After use, rinse the water gun module with clean water, disassemble the grease gun module and wipe off residual grease, then store in the tool cabinet.
Result: Maintenance of 10 motors is completed in 1 hour, saving 40 minutes compared with traditional "hair dryer + single-function grease gun". The motor operation noise is reduced by 5 decibels, and the failure rate decreases by 30% after lubrication.
A1: It is mostly caused by air in the grease cylinder or blocked grease fitting. Troubleshoot step by step:
- Remove Air: Air mixed in during grease filling will cause "empty pressure without grease output"—unscrew the grease cylinder lid, gently push the push rod to discharge air bubbles from the cylinder, then re-tighten the lid (ensure sealing);
2. Check Grease Fitting: A blocked grease fitting (e.g., caked old grease) will block grease output—remove the grease fitting, unclog it with a thin iron wire (or soak in diesel for 5 minutes), and test after re-installation;
3. Grease Compatibility: Using grease with viscosity above 3# (which tends to solidify in low-temperature environments) can also cause no grease output—replace with 00#-2# compatible grease, or preheat the grease to 25℃ in advance (to enhance fluidity).
A2: It is mostly caused by insufficient air source or poor water tank sealing. Handle accordingly:
- Check Air Compressor: An air compressor with displacement ＜0.3m³/min (e.g., small household air compressors) will cause air pressure fluctuations—replace with an air compressor of ≥0.3m³/min, or use the "intermittent spraying" method (30s spraying + 10s pause) to avoid sudden pressure drop;
2. Water Tank Sealing Check: A loose water tank lid will leak air, resulting in insufficient water flow pressure—tighten the water tank lid clockwise until a "click" sound is heard (sealed in place), and check if the silicone sealing ring is deformed (replace with an original sealing ring if deformed);
3. Clean Nozzle: A blocked nozzle (e.g., stuck impurities in water) will cause intermittent flow—remove the nozzle, rinse with clean water (or unclog with a thin needle) to ensure the water outlet channel is unobstructed.
A3: It is mostly caused by push rod rust or residual grease on the cylinder wall. Handle step by step:
- Push Rod Maintenance: The chrome-plated layer of the push rod is prone to rust after wear, increasing resistance—remove the push rod, gently polish off rust with sandpaper, apply a small amount of lubricant (e.g., petroleum jelly), then re-install for use;
2. Grease Cylinder Cleaning: Caked old grease on the cylinder wall will hinder the push rod movement—unscrew the grease cylinder, rinse the inner wall with diesel (to remove residual grease), wipe dry, and refill with new grease;
3. Preventive Suggestion: After each use, push the push rod to discharge remaining grease (to avoid long-term residual caking), and apply a small amount of grease to the contact area between the push rod and the cylinder wall to reduce wear.
A4: There is no "function compromise"—both functions meet professional standards, so you can use it with confidence:
- Water Gun Performance: The 60-100 PSi adjustable pressure is consistent with that of single-function high-pressure water guns (e.g., professional water guns in auto beauty shops also have a pressure range of 60-100 PSi). The 4 water flow modes cover everything from fine cleaning to stubborn stain removal, with no difference in atomization effect and cleaning efficiency compared with single-function water guns;
2. Grease Gun Performance: The 3000 PSi output pressure is even better than some entry-level single-function grease guns (most single-function manual grease guns have a pressure of 2500-3000 PSi), which can meet the lubrication needs of automobiles, trucks, and factory equipment;
3. Durability: The dual-function modules are designed independently. The pneumatic components of the water gun and the metal parts of the grease gun are made of professional-grade materials, with a service life the same as that of single-function tools (over 2 years with normal use). There is no need to worry about "reduced durability after integration".
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
-
Business Type:
Manufacturer,Trading Company
-
-
-
Employee Number:
110~120
-
Ecer Certification：
Verified Supplier
+ Read More
