Product Specification
|
|
|
|
| Payment Terms |
T/T |
Supply Ability |
500PCS/MONTH |
| Delivery Time |
30-45DAYS |
Packaging Details |
Carton Box or Crate |
| Product Name |
YD12-008 Lightweight Manual Pipe Bender (with 7 Dies) |
Core Performance |
Pipe Bending Capacity: Suitable for mild steel Die Configuration: 7 sets of round dies (1"-3") Operation Mode: Pure manual operation Portability: Net weight only 17.5kg |
| Applicable Materials & Dimensions |
Material: Mild Steel Diameter Range: 1"-3" Wall Thickness Limit: 5/16" max for 1-1/4" pipes |
Dimension & Weight Parameters |
Net Weight: 17.5kg Gross Weight: 18.5kg Package Size: 700×280×130mm |
| Brand Name |
YEEDA |
Model Number |
YD12-008 |
| Certification |
CE |
Place of Origin |
Zhejiang，China |
| High Light |
lightweight pipe bender with 7 dies
，17.5kg pipe bender for DIY work
，pipe bender for home deco auto
|
The YD12-008 Lightweight Manual Pipe Bender is a portable equipment designed to address the pain points of "difficult equipment transportation in mobile work scenarios, incomplete dies for small-scale processing needs, and lack of power in temporary scenarios". With "7 full-specification dies + 17.5kg ultra-lightweight + pure manual operation" as the core, it balances multi-diameter adaptation, portability and operational practicality, solving the problems of traditional pipe benders such as "heavy and hard to carry, few dies, and power dependence". It provides a flexible and efficient pipe bending solution for home decoration, small-scale maintenance, DIY processing and other scenarios, with core advantages as follows:
- 7 Dies for Full Coverage, No Extra Purchase for 1"-3" Diameters
Equipped with 7 sets of round dies covering 1"-3" common diameters, fully provided at the factory – no additional purchase required, reducing usage costs:
- Flexible Switch Between Multi-Diameters: From 1" small home decoration pipes (e.g., water and electricity transformation pipes) to 3" agricultural machinery pipes (e.g., U-shaped fixing bolts), only the corresponding die needs to be replaced. Dies are fixed with a "snap-on" design, no tools needed, and replacement can be completed with one hand in 20 seconds (e.g., switching from 1-1/2" die to 2-1/2" die). Compared with models requiring separate die purchases, adaptation efficiency is increased by 2 times.
- Precise Bending Ensures Quality: The inner hole of the die is polished (accuracy ±0.15mm), fitting tightly to the outer wall of mild steel pipes. No scratches or wrinkles occur during bending. For example, when bending a 1-1/4" mild steel pipe with 5/16” wall thickness, the roundness retention rate at the bending angle is ≥88%, meeting the dual requirements of "appearance and strength" for small-to-medium processing. Dies are stored in built-in body slots to avoid loss or collision, adapting to the "alternating work with multi-diameters" scenario.
- 17.5kg Ultra-Lightweight, No Pressure in Movement & Storage
With a net weight of only 17.5kg (equivalent to 3 bags of 5kg rice), it completely solves the problem of "heavy and hard to carry" with traditional pipe benders:
- One-Person Portability for Easy Movement: Even adult women can lift it with one hand, taking only 2 minutes to carry from the first floor to the third floor at a decoration site. It can be carried with a toolbox during outdoor work, and its mobility is increased by 70% compared with heavy pipe benders of the same function (mostly over 30kg); the compact equipment size (approx. 650×250×110mm) fits into the trunk of ordinary family cars (depth ≥600mm), making cross-site transportation convenient.
- Space-Saving Storage: No dedicated storage area is needed – it can be stored in the corner of a home garage, a tool cabinet in an auto repair shop, or a decoration worker’s toolbox. It does not take up much space when idle, adapting to "small-site use + storage" scenarios.
- Pure Manual Operation Without Power Dependence, Usable in Temporary/Outdoor Scenarios
Adopting pure manual operation, no external power or gas source required, completely free from power restrictions:
- Full-Scenario Adaptation: Whether it is outdoor home decoration (no temporary power), agricultural machinery maintenance in remote areas (no gas source equipment), or home DIY (no professional power), operation only requires manual pressing of the handle, avoiding work stoppage due to "lack of power"; manual operation requires low force – with the leverage of the 350mm handle, the pressing force is ≤45N when bending a 1-1/4" mild steel pipe with 5/16” wall thickness, allowing adult men to operate continuously for 20 minutes without obvious fatigue.
- Stable Output Ensures Accuracy: Manual operation allows adjusting the bending rhythm by controlling the pressing speed (3-8mm/s). Combined with the 0°-180° angle dial (accuracy ±1°) on the body, the bending angle can be precisely controlled. For example, when a 45° pipe turn is needed for home decoration, it can be formed in one time without deviation, no repeated test bending required, and the pipe bending qualification rate is over 96%.
- Simple Installation + Limit Buckle, Safe & Worry-Free Operation
- Fixable for Better Stability: The body has 2 reserved simple mounting holes. For batch processing (e.g., making pipe clamps in small hardware workshops), it can be fixed to the workbench with bolts – the body has no shaking when bending 3" large-diameter steel pipes, and stability is increased by 50% compared with models without fixed structures; it can be used directly on the ground without installation during temporary work, flexibly adapting to "fixed + mobile" dual scenarios.
- Limit Buckle Prevents Deviation: The workbench is equipped with a pipe limit buckle, which firmly fixes the pipe during bending to avoid left-right sliding or rotation. For example, when bending a 2" thin-walled steel pipe, the buckle fits tightly to the pipe, preventing bending angle deformation due to deviation and ensuring operation safety and bending quality.
-
Outdoor Home Decoration Water and Electricity Transformation
A home decoration worker conducts outdoor water and electricity transformation for a rural self-built house (using 1-1/2" mild steel pipes with 4mm wall thickness), with no power on-site. The YD12-008 is used: Carry the equipment to the site in a toolbox, take it out and place it directly on the ground, install the 1-1/2" die, and manually press the handle to bend the steel pipe to 90°; the 17.5kg lightweight design allows movement in the courtyard with the construction progress, and the bending time for a single pipe is shortened from 10 minutes to 4 minutes. 10 pipes are completed in only 40 minutes, adapting to the "outdoor power-free home decoration" scenario.
-
Small Auto Repair Shop Repairing Exhaust Pipes
A small auto repair shop repairs the exhaust pipe of a family car (1-1/4" stainless steel pipe with 3mm wall thickness, material compatibility to be confirmed). The YD12-008 is used: Install the 1-1/4" die, place the exhaust pipe into the limit buckle, and manually press the handle slowly to bend it to 90°; the equipment can be placed next to the maintenance workstation without fixing, and the bent exhaust pipe has no wrinkles and no air leakage after installation. The maintenance time for a single exhaust pipe is shortened from 15 minutes to 7 minutes, adapting to the "manual pipe bending in small auto repair shops" scenario.
-
Agricultural Machinery Repair Point Making U-Bolts
An agricultural machinery repair point makes 2-1/2" mild steel U-bolts (5mm wall thickness, for fixing agricultural machinery pipelines) for a tractor. The YD12-008 is used: Install the 2-1/2" die, set the 180° bending angle with the angle dial, and manually press the handle to complete the U-shaped bending; the equipment can be carried to the field with the maintenance vehicle, no power dependence required, and the production time for one U-bolt is about 8 minutes, adapting to the "agricultural machinery field maintenance" scenario.
-
Home DIY Metal Component Making
An enthusiast makes a home garden metal bracket (using 1" mild steel pipes with 2.5mm wall thickness) via DIY. The YD12-008 is used: Take the equipment from the garage, install the 1" die, and manually bend the steel pipe to angles such as 60° and 90° to assemble into a bracket; the equipment is lightweight and easy to operate, no professional skills required, and one bracket is completed in 2 hours, adapting to the "home DIY processing" scenario.
A1: Bending stainless steel pipes is not recommended; thin-walled copper pipes (wall thickness ≤3mm) can be bent with caution. The equipment is rated for mild steel – stainless steel pipes have high hardness (around HB 200), and forced bending will cause die wear and body deformation, shortening the equipment service life; copper pipes are relatively soft, but thin-walled ones (diameter ≤1-1/2", wall thickness ≤3mm) should be selected. When bending, reduce the pressing speed (≤3mm/s) to avoid copper pipe wrinkling; if frequent bending of stainless steel/copper pipes is needed, a dedicated material pipe bender is recommended to avoid equipment damage due to over-specification use.
A2: Proper lifting will not damage the equipment – pay attention to the lifting position. The equipment is designed with dedicated handles (on both sides of the body); when lifting with one hand, the force is applied to the metal frame, which will not damage the dies or operating parts; avoid lifting by grabbing the operating handle (the handle has limited load-bearing capacity, and long-term lifting may cause handle deformation); short-distance lifting (≤10 meters) is recommended, and a small trolley should be used for long-distance movement to save effort and protect the equipment, extending its service life.
A3: It is mostly due to insufficient pressing stroke or excessive pipe wall thickness, which can be checked in the following steps: ① Confirm whether the pipe wall thickness is ≤1/4” (max. wall thickness for 3" diameter). Excessive wall thickness will cause excessive pressing resistance, making it impossible to complete full-angle bending – replace with a steel pipe that meets the requirements. ② If the wall thickness is compliant, check whether the die is installed in place (whether the snap is locked). Loose dies will cause deviation during pressing – reinstall and lock the snap. ③ Press slowly and steadily to ensure the hydraulic rod (if any) or mechanical structure is fully advanced, avoiding mid-stop to ensure complete bending angle formation.
A4: Calibration can be done with simple tools to ensure bending angle accuracy: ① Prepare a square (accuracy ±0.5°), place the equipment on a flat table, and loosen the dial fixing screws. ② Align the 90° angle of the square with the workbench reference line, adjust the dial so that the "90°" scale line coincides with the square, then tighten the fixing screws. ③ Test-bend a short pipe (e.g., 1" mild steel pipe) to 90°, and measure the actual angle with the square. If the deviation is ≤1°, calibration is completed; if the deviation is large, check whether the positioning block is loose, readjust the positioning block position and calibrate again – no professional maintenance personnel are needed.
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
-
Business Type:
Manufacturer,Trading Company
-
-
-
Employee Number:
110~120
-
Ecer Certification：
Verified Supplier
+ Read More
