Product Specification

YD27-008A Plastic-Steel Multifunctional Tool Cabinet Webpage Detail Page (English)

I. Product Specifications (SPECIFICATION)

1. Core Parameter Table

2. General Adaptability Parameters

II. Product Details (PRODUCT DETAILS)

1. 10-Drawer Classified Storage, Tools "in Their Proper Places"

(1) Multi-Specification Drawers + Large Capacity, Covering All Tool Categories

• Small/Mini Shallow Drawers: Classified by tool usage frequency—commonly used screwdrivers and pliers are placed in easily accessible positions, and spare screw boxes are placed inside, ensuring clear classification for immediate access and avoiding loss of small parts due to mixing;
• Medium-Deep Drawers: Concentrated storage of medium tools (e.g., electric impact drills, wrench sets). The EVA liners are cut into grooves for fixation, preventing collision noise of tools during movement;
• Deep Drawer: Exclusive storage for heavy tools (e.g., hydraulic jacks). The 300mm depth can fully accommodate tools, and the reinforcing ribs at the bottom (spacing 12cm) ensure stable load-bearing;
• Long Drawer: Suitable for long-handled tools (e.g., large wrenches, crowbars). The 944mm length avoids bending storage of tools, solving the pain point of "long tools being unable to fit" in traditional tool cabinets;
  Compared with traditional 5-6 drawer tool cabinets, the number of storage categories is increased by 3 times, tool access time is reduced by 70%, and tool return efficiency is increased by 80%.

(2) High-Smoothness Slide Rails + EVA Liners, Protecting Tools and Ensuring Convenience

• Ball Slide Rails: All 10 drawers are equipped with 16-inch ball slide rails, with a pull resistance of only 7N. Even when the deep drawer is fully loaded with 40kg of tools, it can be easily pushed with one hand, no jamming or hesitation; the slide rails are galvanized, with no rust after long-term use (more than 1500 pulls), and a service life of over 8 years;
• EVA Liners: The 3mm-thick EVA liners are soft and non-slip, avoiding wear caused by hard contact between tools and drawers (especially suitable for precision tools such as torque wrenches). The liners can be cut into different shapes as needed to adapt to the classified storage of special-shaped tools (e.g., L-shaped wrenches, socket heads).

2. Plastic-Steel Composite Material + Reinforced Structure, Maximum Durability

(1) Material Advantage: Balancing Toughness and Lightweight

• Impact Resistance: Slight collisions with equipment (e.g., machine tools, shelves) in heavy machinery workshops only cause surface scratches, no denting or deformation. Its impact resistance is 75% higher than that of pure plastic tool cabinets;
• Corrosion Resistance: Engine oil, cutting fluid, and hydraulic oil spilled on the cabinet surface can be cleaned by wiping with a rag, no residual stains. Its corrosion resistance is 45% higher than that of pure steel tool cabinets;
• Lightweight: 25% lighter than pure steel tool cabinets, it can be pushed and turned by 2 people, solving the "difficult movement" pain point of traditional heavy-load tool cabinets and adapting to multi-workstation turnover needs in large workshops.

(2) Detailed Protection: Safe and Durable

• Surface Protection: The electrostatic powder coating not only supports color customization (adapting to the industrial style of the workshop) but also passes the 96-hour salt spray test without rust. Even when stored in a humid storage center for a long time, the cabinet body will not rust; the coating hardness reaches 4H, and slight scratches in daily use do not expose the base color, maintaining a neat appearance;
• Safety Design: The corners of the cabinet are rounded (no sharp protrusions) to avoid bumps and scratches when pushing or accessing tools; the central flat lock can lock all drawers, preventing wrong taking and loss of tools—especially suitable for multi-workstation sharing or centralized storage scenarios; 2 symmetrically distributed side handles ensure even force distribution when pushed by 2 people, avoiding cabinet tilting.

3. Universal Casters + Braking Design, Balancing Mobility and Stability

(1) 5-Inch TPR Casters, Easy Movement Under Heavy Load

• Flexibility: Even when the cabinet is fully loaded with 250kg of tools, it can be flexibly turned by 2 people, with a minimum turning radius of 1.5m, enabling easy movement between equipment gaps in large workshops (e.g., between heavy machine tools and assembly lines);
• Mute Performance: TPR material has excellent mute effect, with a rolling noise of ≤60dB (lower than the 70dB workshop environmental noise), avoiding interference with precision processing or maintenance operations;
• Wear Resistance: The wheel surface adopts a high-wear-resistant formula, with no obvious wear after long-term use (more than 3000 meters of rolling), and a service life of over 6 years.

(2) Full Braking + Stable Structure, Ensuring Safety

• Braking Locking: The 2 swivel casters are equipped with full braking function. After stepping on the brake pedal, the casters are completely locked, and the cabinet body will not move even when subjected to lateral force (e.g., workers picking up heavy tools). Compared with tool cabinets without brake casters, the static stability is increased by 98%;
• Heavy-Load Support: 4 reinforced beams (spacing 25cm) are installed at the bottom of the cabinet, welded and fixed to the caster brackets. When fully loaded, the center of gravity falls on the center of the caster set, avoiding cabinet tilting. Compared with ordinary frame tool cabinets, the heavy-load stability is increased by 50%.

III. Application Scenarios (APPLICATION SCENARIOS)

1. Full-Process Maintenance Tool Management in Large Auto Repair Shops (Core Scenario)

1. Technicians organize the cabinet in the tool room: Place screwdrivers and screw boxes in small/mini shallow drawers, electric impact drills and wrench sets in medium-deep drawers, hydraulic jacks in the deep drawer, and long-handled wrenches in the long drawer. Each drawer is separated and fixed with EVA liners, and the central flat lock is locked to prevent tool loss.
2. 2 people cooperate to push the tool cabinet to the maintenance workstation, step on the brake pedal to lock the casters, and open the corresponding drawer to take tools—the ball slide rails are smooth, no forceful pulling required; during the maintenance interval, wipe off engine oil spilled on the cabinet surface with a rag for cleaning.
3. When switching workstations, unlock the casters and push the cabinet. The TPR casters do not slip on the oily floor, completing one turnover in 8 minutes without transporting tools in batches.
   Result: With multi-drawer classification and oil-resistant design, compared with traditional tool carts (requiring 3 transfers), it can carry full-process auto repair tools at one time, increasing maintenance efficiency by 75% and reducing technicians' physical consumption by 65%.

2. Classified Storage of Precision and Heavy Tools in Heavy Machinery Workshops

1. Before maintenance, place vernier calipers and small part boxes in small/mini shallow drawers, torque wrenches and hexagon wrench sets in medium-deep drawers, bench vices in the deep drawer, and crowbars in the long drawer. After closing the drawers, they are sealed for dust-proofing.
2. 2 people push the tool cabinet to the heavy machine tool, lock the casters after braking, and take tools—the central flat lock prevents unauthorized opening by non-operators, protecting the precision of precision tools; during maintenance, blow off dust on the cabinet surface with compressed air, no in-depth cleaning required.
3. After maintenance, put the tools back in place, lock the cabinet, and push it to the tool room for storage. The powder coating resists dust accumulation and remains clean during long-term use.
   Result: With classified storage and dust-proof design, compared with open tool racks (tools are easy to get dusty and collide), the precision retention rate of precision tools is increased by 98%, and the tool damage rate is reduced by 92%.

3. Bulk Tool Turnover and Inventory in Hardware Storage Centers

1. Warehouse managers load 30 sets of tools (total weight 1200kg) into the deep/medium-deep drawers of 10 tool cabinets (each cabinet load is about 120kg, not exceeding the load-bearing limit), and 20 boxes of parts (total weight 160kg) into small/mini shallow drawers. Each drawer is labeled with the name and quantity of tools/parts.
2. Place the tool cabinets against the wall, and each cabinet occupies only 0.48m² (105.2×45.9cm) after the casters are locked. Compared with traditional tool racks (each occupying 1.5m²), the space utilization rate is increased by 68%, allowing the storage center to accommodate twice as many tools.
3. During inventory, check the quantity one by one according to the drawer labels, no need to move tools. One cabinet can be inventoried in 15 minutes. Compared with scattered storage (tools scattered on shelves), the inventory efficiency is increased by 85%.
   Result: With bulk storage and efficient inventory functions, compared with traditional storage methods, the storage management efficiency is increased by 80%, the tool inventory error rate is reduced to less than 0.5%, and 88 units can be loaded in a 40-foot high cube container, resulting in low logistics costs for bulk transportation.

IV. Frequently Asked Questions (FAQ)

Q1: When the tool cabinet is fully loaded with 300kg, can the 10 drawers and casters bear the weight? Will drawer sagging or caster breakage occur?

Q2: After long-term use, some drawers jam during pulling and the EVA liners wear out. How to deal with it?

1. Slide Rail Cleaning: Pull the jammed drawer out completely, use a brush to clean dust and metal debris (easily accumulated in industrial scenarios) in the slide rails, then wipe the slide rail surface with a dry cloth, drop 2 drops of lithium-based grease (a thin layer to avoid dust adhesion), and pull the drawer repeatedly 3-5 times to relieve jamming;
2. Liner Replacement: EVA liners are of universal specifications (replacement parts of the same thickness can be purchased by contacting the brand after-sales service). When replacing, simply remove the old liner, lay the new liner in the drawer and cut it to size. It can be completed in 10 minutes with low replacement cost. It is recommended to replace the liners every 2 years to ensure tool protection.

Q3: Can 2 people easily push the 94.2kg tool cabinet? Are there any labor-saving tips?

1. Cooperative Posture: 2 people stand on both sides of the tool cabinet respectively, hold the symmetrical oval handles with both hands, and push at the same time (avoiding cabinet tilting caused by one-sided force). The pushing direction is consistent with the rolling direction of the swivel casters to reduce resistance;
2. Floor Selection: Prioritize pushing on flat and oil-free passages. If the floor is oily, lay cardboard in front of the casters (to enhance friction) to avoid increased force due to slipping;
3. Load Distribution: Evenly distribute heavy tools to the deep drawer (middle layer) and place light tools in upper and lower drawers to reduce the offset of the cabinet's center of gravity, improve pushing stability, and reduce physical consumption.

Q4: Is customization of cabinet color and drawer handle LOGO supported for MOQ 50 units? Will the customization cycle be extended?

1. Color Customization: Provide RAL color code or Pantone color code to customize colors matching the unified style of the workshop (e.g., mechanical blue, industrial gray). No additional color mixing fee is charged for orders of 50 units, and the color error is ≤ΔE2 (no obvious visual difference);
2. LOGO Customization: Drawer handles are made of aluminum alloy, which support laser-engraved company LOGOs and tool cabinet numbers (e.g., "YD27-008A-01"). The LOGO size is ≤60×30mm, and the customization fee is waived for orders of 50 units;
3. Cycle Difference: The delivery cycle for standard models is 5-10 days, and customized models require an additional 3-5 days (including color adjustment and LOGO production). For bulk procurement, the delivery date can be confirmed with the manufacturer in advance without affecting the production plan.