Product Specification

Industrial-Grade Plastic-Steel Tool Cabinet Webpage Detail Page (English)

I. Product Specifications (SPECIFICATION)

1. Core Parameter Table

2. General Adaptability Parameters

II. Product Details (PRODUCT DETAILS)

1. Plastic-Steel Composite Material + Reinforced Structure, Maximum Durability

(1) Material Advantage: Balancing Toughness and Lightweight

(2) Detailed Protection: Protecting Tools and Users

• Surface Protection: The powder coating not only supports color customization (adapting to the industrial style of the workshop) but also passes the 72-hour salt spray test without rust. Even when stored in a humid warehouse for a long time, the cabinet body will not rust; the coating hardness reaches 3H, and slight scratches in daily use do not expose the base color, maintaining a neat appearance;
• Drawer Protection: The drawer is equipped with a built-in 2.5mm-thick EVA liner, which is soft and non-slip, avoiding wear caused by hard contact between tools and the drawer (especially suitable for precision tools such as vernier calipers). The liner can be cut into different shapes as needed to adapt to the classified storage of special-shaped tools;
• Safety Design: The corners of the cabinet body are rounded (no sharp protrusions) to avoid bumps and scratches when pushing or accessing tools; the central flat lock + key design prevents wrong taking and loss of tools, especially suitable for multi-workstation sharing scenarios.

2. High-Smoothness Drawer + Multi-Compartment Storage, Doubling Efficiency

(1) Ball Slide Rails + Optional Functions, More Convenient to Use

(2) Multi-Compartment Classification + Large Capacity, Accommodating All Tools

• Basic Storage Compartments (Small Space): Classified by tool usage frequency—commonly used screwdrivers and pliers are placed in easily accessible positions, and spare part boxes (such as screws and gaskets) are placed inside, with clear classification for immediate access;
• Drawer (Large Space): Concentrated storage of heavy tools (such as socket sets and hydraulic wrenches), separated and fixed by EVA liners to avoid collision noise of tools during movement;
  The total storage volume is approximately 180L, which can replace 2-3 sets of traditional tool racks, saving workshop space and increasing tool return efficiency by 70%.

3. Universal Casters + Braking Design, Balancing Mobility and Stability

(1) 5-Inch TPR Casters, Easy Movement

(2) Full Braking + Stable Handles, Ensuring Safety

• Braking Locking: The 2 swivel casters are equipped with full braking function. After stepping on the brake pedal, the casters are completely locked, and the cabinet body will not move even when subjected to lateral force (such as workers picking up heavy tools). Compared with tool cabinets without brake casters, the static stability is increased by 98%;
• Labor-Saving Handles: The oval side handles fit the curvature of the palm, with even force distribution on the hands when pushing and holding, and no sense of tightness during long-term pushing. The handles are welded and fixed to the cabinet body (load-bearing ≥80kg) without loosening risk. Compared with straight rod handles, the labor-saving effect is increased by 35%.

III. Application Scenarios (APPLICATION SCENARIOS)

1. Maintenance Tool Management in Auto Repair Shops (Core Scenario)

1. Technicians organize the cabinet in the tool room: Place screwdrivers, pliers, and screw boxes in the 7 basic storage compartments (commonly used tools in outer positions), and place socket sets and hydraulic jacks in the drawer (fixed by EVA liners). Lock the central flat lock to prevent tool loss.
2. Push the tool cabinet to the workstation with one person, step on the brake pedal to lock the casters, open the drawer to take the socket set for tire removal, and take screwdrivers from the basic storage compartments to tighten screws. Tools are taken and used immediately without trips to the tool room.
3. During the maintenance interval, wipe off engine oil spilled on the cabinet surface with a rag; when switching workstations, unlock the casters and push the cabinet. The TPR casters do not slip on the oily floor, completing one turnover in 5 minutes.
   Result: With heavy-load and oil-resistant design, compared with traditional tool carts (load-bearing ≤80kg), it can carry a full set of auto repair tools at one time, increasing maintenance efficiency by 65% and reducing technicians' physical consumption by 55%.

2. Precision Tool Storage in Mechanical Workshops

1. Before maintenance, place vernier calipers and tape measures in the basic storage compartments (outer positions for easy access), place bench vices and hexagon wrench sets in the drawer (separated by EVA liners to avoid collision). After closing the drawer, it automatically returns to ensure sealing and dust-proofing.
2. Push the tool cabinet to the lathe, lock the casters after braking, and take tools—the central flat lock prevents unauthorized opening by non-operators, protecting the precision of precision tools; during maintenance, blow off dust on the cabinet surface with compressed air without in-depth cleaning.
3. After maintenance, put the tools back in place, lock the cabinet, and push it to the tool room for storage. The powder coating resists dust accumulation and remains clean during long-term use.
   Result: With multi-compartment storage and dust-proof design, compared with open tool racks (tools are easy to get dusty), the precision retention rate of precision tools is increased by 92%, and the tool damage rate is reduced by 85%.

3. Bulk Tool Turnover in Hardware Warehouses

1. Warehouse managers load 15 sets of tools (total weight 120kg) into 7 basic storage compartments (about 17kg per compartment), and 10 boxes of parts (total weight 60kg) into the drawer. The EVA liners are labeled and partitioned for quick identification.
2. Place the tool cabinet against the wall, and it occupies only 0.31m² (68.8×45.9cm) after the casters are locked. Compared with traditional tool racks (occupying 1.5m²), the space utilization rate is increased by 79%, allowing the warehouse to accommodate 10-12 more tool cabinets.
3. When workers collect tools, they unlock the cabinet with a key, take and place tools according to labels, and update records simultaneously to avoid tool backlog; during bulk replenishment, push the tool cabinet to the unloading area without manual handling, reducing labor intensity.
   Result: With bulk load-bearing and efficient inventory functions, compared with scattered storage (tools scattered on shelves), the warehouse management efficiency is increased by 75%, the tool inventory time is reduced by 65%, and 180 units can be loaded in a 40HQ container during bulk transportation, resulting in low logistics costs.

IV. Frequently Asked Questions (FAQ)

Q1: When the tool cabinet is fully loaded with 200kg, can the casters bear the weight? Will caster breakage or cabinet tilting occur?

Q2: After long-term use, the drawer slide rails jam and the auto-return function fails. How to deal with it?

1. Slide Rail Cleaning: Pull the drawer out completely, use a brush to clean dust and metal debris (easily accumulated in industrial scenarios) in the slide rails, then wipe the slide rail surface with a dry cloth, drop 2 drops of lithium-based grease (a thin layer to avoid dust adhesion), and pull the drawer repeatedly 3-5 times to relieve jamming;
2. Auto-Return Function Repair: If the auto-return function fails, open the side cover of the drawer and check whether the spring of the self-priming component is broken—if broken, replace it with a spring of the same specification (diameter 1.2mm, length 35mm, available in hardware stores); if the spring is not broken, adjust the position of the component (slightly push the self-priming block) and test the return effect, which can usually restore normal function.

Q3: Can one person push the 63.4kg tool cabinet? Are there any labor-saving tips?

1. Pushing Posture: Hold the oval side handles with both hands (the distance between the handles is suitable for shoulder width), lean the body against the cabinet (using the center of gravity to assist in force application), and push in the direction consistent with the rolling direction of the swivel casters to avoid oblique pushing (reducing resistance). This posture can reduce physical consumption by 30%;
2. Floor Selection: Prioritize pushing on flat and oil-free passages. If the floor is oily, lay cardboard in front of the casters (to enhance friction) to avoid slipping;
3. Load Distribution: Place heavy tools in the drawer (bottom layer) and light tools in the basic storage compartments (upper layer) to lower the cabinet's center of gravity, improve pushing stability, and reduce force burden.

Q4: Is customization of cabinet color and drawer LOGO supported? Will the customization cycle be extended?

1. Color Customization: Provide RAL color code or Pantone color code to customize colors matching the unified style of the workshop (such as industrial gray, mechanical blue). There is no additional cost for bulk orders ≥50 units, and a small color mixing fee is required for small batches;
2. LOGO Customization: The drawer handles are made of aluminum alloy, which supports laser-engraved company LOGOs and tool cabinet numbers (for easy asset management). The LOGO size is ≤60×25mm, and the customization fee is waived for bulk orders ≥100 units;
3. Cycle Difference: The delivery cycle for standard models is 3-7 days, and customized models require an additional 3-5 days (including color adjustment and LOGO production). For bulk procurement, the delivery date can be confirmed with the manufacturer in advance without affecting the production plan.