Product Specification

YD44-014 Industrial Adjustable Mobile Facility Oil Drainer (Industrial Adjustable Mobile Facility Oil Drainer YD44-014) Webpage Detail Page (English)

I. Product Specifications (SPECIFICATION)

1. Core Parameter Summary Table

2. Performance Test Table

II. Product Details (PRODUCT DETAILS)

1. Dual Adjustment of Height and Direction, Precise Collection in Multiple Scenarios

(1) 15-30cm Stepless Adjustment, Adapting to Equipment of Different Heights

• Wide Height Coverage: The minimum height of 15cm is suitable for low-position dripping points of small machine tools (e.g., CNC lathes), and the maximum height of 30cm is suitable for high-position oil drain ports of medium-sized compressors and hydraulic stations. No additional heightening or equipment modification is required, solving the contradiction of traditional fixed oil pans being "unreachable for high equipment and unnecessary for low equipment";
• Convenient Adjustment Operation: The knob-type locking design allows height adjustment with one hand, with an adjustment accuracy of 1cm. Even for minor changes in the position of equipment oil drain ports, quick alignment can be achieved, saving 80% of operation time compared to traditional bolt adjustment.

(2) 360° Rotating Tray, Omni-Directional Collection Without Dead Corners

• Omni-Directional Adaptation: The tray can rotate 360° freely around the bracket. Whether the waste oil drips from the front, side, or bottom of the equipment, the tray direction can be adjusted for precise collection, avoiding the problem of "fixed direction and missed collection" of traditional oil pans;
• Stable Locking Structure: After rotation adjustment, tighten the knob at the bottom of the bracket to lock the direction. Even if the workshop equipment vibrates (amplitude ≤2mm), the tray can maintain a fixed angle, achieving a 100% waste oil collection rate.

2. 15L Thickened Tray + Anti-Rust Design, Durable and Easy to Clean

(1) Large Capacity + Anti-Overflow Design, Reducing Cleaning Frequency

• Practical 15L Capacity: It can collect waste oil from 2 small machine tools (daily dripping volume approx. 5-8L) or 1 medium-sized compressor (daily dripping volume approx. 12-15L) at a time. Factories do not need frequent dumping, reducing daily cleaning times from 3 to 1 and lowering labor costs by 60%;
• High Baffle for Anti-Overflow: The 3cm baffle on the tray edge prevents spillage and workshop floor contamination even if waste oil drips quickly or equipment leaks suddenly, reducing subsequent cleaning workload.

(2) Thickened Anti-Rust Material, Low Long-Term Usage Cost

• Double-Layer Anti-Rust Protection: The tray is made of 1.2mm thickened cold-rolled steel plate, with double-layer anti-rust treatment (electrophoresis + spray coating) on the surface. It is resistant to humid workshop environments and waste oil corrosion, with no rust for 3 years even under outdoor exposure or long-term contact with engine oil. Its service life is 4 times longer than that of ordinary iron sheet oil pans;
• Easy-to-Clean Structure: The tray bottom is smooth without protrusions. During waste oil cleaning, it can be directly rinsed with a high-pressure water gun or wiped with a rag, with no dead corners for oil residue. Cleaning time is reduced by 50% compared to oil pans with grooves.

3. 2.5-Inch Swivel Casters + Lightweight Design, Easy Operation for One Person

(1) Flexible Mobility, Suitable for Narrow Workstations

• Advantages of Small-Size Casters: The 2.5-inch swivel casters have a small diameter and flexible steering, with a minimum turning radius of only 0.8 meters. They can easily pass through narrow channels (width ≥60cm) between workshop machine tools and equipment, with 30% higher flexibility than large-diameter oil pans;
• Low-Resistance Pushing: The oil-resistant rubber wheel surface reduces friction with the ground. One person can push the equipment fully loaded with 28kg, eliminating the need for multi-person collaboration. It is especially suitable for workshops with dense equipment and tight labor.

(2) Stable Braking, Safe and No Displacement

• Metal Brake Pads: The casters are equipped with metal brake pads. After locking, the equipment has no displacement even on a 5° inclined workshop floor, avoiding waste oil spillage caused by equipment sliding; the brake pedal is wide, allowing easy operation even when wearing work shoes;
• Buffer Bracket: The buffer pad at the connection between the bracket and the tray can absorb the force transmitted by equipment vibration, reducing tray deviation and ensuring that waste oil always drips into the tray accurately without spillage.

III. Application Scenarios (APPLICATION SCENARIOS)

1. Waste Oil Collection for CNC Lathes in Machinery Factories (Core Scenario)

1. Equipment Adaptation and Arrangement:
   - One operator pushes YD44-014 to the side of the first lathe, adjusts the tray height to 22cm (according to the height of the lathe's waste oil dripping point, approx. 22cm), rotates the tray to align with the dripping position, and steps on the caster brake to lock;
   - Arrange oil drainers for 10 lathes in sequence, with an adjustment time of approx. 1 minute per lathe, completing all arrangements in 30 minutes;
   2. Daily Collection and Cleaning:
   - After 2 days of collection, the average waste oil collected in a single tray is 12L (not reaching full capacity). The operator pushes the oil drainer to the waste oil recycling area alone, dumps the waste oil, and puts it back in place;
   - No frequent equipment movement or manual collection with pans is required. Cleaning is only needed once a day, saving 2 hours of manual time;
   3. Operation Effect:
   - Strong Adaptability: Height and direction adjustments accurately align with the lathe dripping points. No waste oil spillage occurs on 10 lathes, and workshop floor oil stains are reduced by 90%;
   - High Efficiency: One person can complete arrangement and cleaning, saving the workload of 3 people per day compared to traditional manual collection;
   - Low Cost: A 20-foot container can hold 330 units, resulting in 15% lower transportation costs for bulk purchases than similar products.

2. Oil Drainage for Medium-Sized Equipment in Compressor Workshops (Scenario 2)

1. Equipment Adjustment and Collection:
   - The operator pushes YD44-014 to the side of the compressor, adjusts the tray height to 28cm, rotates the tray to align with the position below the oil drain port, and locks the brake;
   - Open the compressor oil drain valve; 10L of waste oil flows into the oil tray completely in 15 minutes, and the tray baffle prevents overflow;
   2. Waste Oil Transfer and Cleaning:
   - After oil drainage, the operator unlocks the brake, pushes the oil drainer to the side of the waste oil recycling tank, dumps the waste oil, cleans the tray, and then pushes it to the side of the next compressor;
   3. Operation Effect:
   - Space Adaptation: The 2.5-inch swivel casters can move flexibly in narrow channels, with no need to move the compressor, ensuring convenient operation;
   - Safe and No Spillage: Precise height adjustment and no tray deviation, with no waste oil contamination on the floor during oil drainage of 5 compressors;
   - Durability: The thickened tray has no rust after long-term contact with engine oil and remains intact after 6 months of use.

3. Temporary Oil Collection in Hydraulic Equipment Maintenance Areas (Scenario 3)

1. Flexible Adjustment and Movement:
   - According to the dripping point height of the first hydraulic cylinder (18cm), the maintenance personnel adjusts the oil drainer height to 18cm and rotates the tray to align with the dripping position;
   - After maintenance, the maintenance personnel pushes the oil drainer to the side of the second piece of equipment alone, quickly adjusts the height to 25cm, and continues collection;
   2. Operation Effect:
   - Quick Adaptation: Height and direction adjustments require no tools, with an adjustment time of only 30 seconds per piece of equipment, without affecting maintenance progress;
   - Convenient Mobility: The lightweight design allows maintenance personnel to push it to follow the equipment movement at any time, with no need for additional labor;
   - Clean and Environmental Protection: Waste oil is collected centrally, with no oil stains in the maintenance area, meeting workshop environmental protection requirements.

IV. Frequently Asked Questions (FAQ)

Q1: The tray sinks slightly after height adjustment, or cannot be locked firmly after rotation. How to handle this?

1. Tighten the Adjustment Knob: If the height sinks, tighten the height adjustment knob clockwise (moderate force to avoid damaging the threads) to ensure the knob is tightly engaged with the bracket. Test the load-bearing capacity after height locking (no sinking when placing a 5kg heavy object is acceptable);
2. Clean Bracket Impurities: If it cannot be locked firmly after rotation, disassemble the connecting bolts between the tray and the bracket, clean oil stains, metal debris, and other impurities at the connection, apply a small amount of oil-resistant grease, reinstall, and rotate to lock. The firmness will be improved;
3. Regular Inspection: Check the connection status of the adjustment knob and bracket weekly, and tighten in time if looseness is found to avoid component wear caused by long-term use.

Q2: When moving the equipment on the workshop concrete floor, the casters tend to get stuck or make abnormal noise. How to solve this?

1. Clean Caster Impurities: Use a screwdriver or tweezers to clean concrete debris and metal particles (easily accumulated on workshop floors) from the caster axle and wheel groove to avoid caster jamming caused by impurities;
2. Lubricate the Axle: Drop 1-2 drops of industrial lubricating oil on the caster axle (avoid using grease to prevent adsorption of more impurities), push the caster to rotate back and forth to ensure uniform distribution of the lubricating oil, and the abnormal noise will be eliminated;
3. Check Wheel Surface Wear: If the wheel surface is severely worn (e.g., rubber cracking, unevenness), contact the merchant to replace 2.5-inch swivel casters of the same specification to avoid movement jamming caused by wheel surface problems.

Q3: There is residual oil on the inner wall of the tray after long-term use, which is difficult to clean. How to handle this?

1. Daily Pre-Treatment: Immediately wipe the inner wall of the tray with a dry rag after each waste oil dumping to reduce oil residue; if the oil has solidified, pour a small amount of diesel (to dissolve the oil), let it stand for 10 minutes, then wipe with a rag, and the oil can be easily removed;
2. Deep Cleaning: Conduct deep cleaning once a month. Disassemble the tray (loosen the bracket connecting bolts), rinse the inner wall with a high-pressure water gun (pressure adjusted to 0.3MPa), wipe with a neutral detergent (e.g., dish soap), rinse with clean water, air-dry, and reinstall;
3. Avoid Corrosion: Do not use strong acid or alkali cleaners (e.g., hydrochloric acid, sodium hydroxide solution) to prevent damage to the anti-rust coating on the tray surface and avoid rust.

Q4: Can this oil drainer be used to collect liquids other than industrial waste oil, such as coolant and cutting fluid?

1. Material Compatibility Risk: Coolant contains rust inhibitors, preservatives, and other chemical components, which may corrode the anti-rust coating on the tray surface and cause tray rust; cutting fluid contains surfactants, which may accelerate the aging of caster rubber and shorten the service life;
2. Function Adaptation Limit: The equipment is designed to collect waste oil with moderate viscosity. Coolant and cutting fluid have strong fluidity. If the dripping speed is fast, they may exceed the height of the tray baffle and cause overflow;
3. Usage Suggestion: If temporary use is really necessary, first conduct a small-dose test (pour 1L of liquid and observe for 24 hours with no coating peeling or caster deformation). After use, thoroughly clean the tray with clean water immediately to avoid residual liquid corroding the equipment. Long-term collection of non-waste oil liquids is not recommended.