Q43L-3150 315 Ton Gantry Hydraulic Scrap Shear with 1300 mm Blade Length and

The Q43L-3150 gantry hydraulic scrap shear is a heavy-duty cutting system designed for continuous scrap preparation lines in medium and large metal recycling facilities.

The machine features a 4000 × 1300 × 700 mm press box, allowing large volumes of mixed scrap materials to be compressed and positioned before cutting. A 1300 mm industrial cutting blade provides stable and efficient shearing performance, while the hydraulic system delivers consistent cutting cycles suitable for continuous recycling operations.

With a cutting speed of approximately 3–4 strokes per minute, the Q43L-3150 offers reliable performance for facilities that require stable throughput and controlled heavy-scrap processing.

The 4000 × 1300 × 700 mm press box allows bulky and irregular scrap to be loaded efficiently by crane or conveyor, reducing frequent repositioning and improving line continuity.

The blade length supports cutting of bundled and mixed scrap with consistent cross-sections, helping maintain uniform material size for downstream processing.

A cutting speed of 3–4 strokes per minute prioritizes:

• Reduced mechanical stress

• Higher structural stability

• Long-term operation in steel mill environments

This makes the machine suitable for continuous-duty operation rather than high-speed intermittent use.

The 2 × 37 kW hydraulic drive system ensures sufficient power reserve for stable cutting under varying scrap loads, without sacrificing control accuracy.

• Mixed heavy steel scrap

• Structural steel offcuts

• Bundled rebar and profiles

• Industrial production scrap

• Bulky irregular steel components

This model is not positioned for light scrap or thin sheet cutting, but for steady preparation of medium-to-heavy scrap streams.

The Q43L-3150 is commonly integrated as:

• Front-end shear before shredder lines

• Scrap preparation unit before furnace charging

• Core cutting equipment in continuous recycling systems

• Fixed gantry shear in large-scale scrap yards

Its controlled operation rhythm makes it especially suitable where material consistency is more important than maximum cutting speed.

No. This model is designed for controlled, continuous cutting, prioritizing stability and durability rather than high stroke rates.

Large recycling plants and steel mills that operate continuous preparation lines and require reliable, long-term operation.

Yes. The large press box and gantry structure are designed for crane feeding and conveyor integration.

It is best used as pre-processing equipment within a system, rather than as a standalone high-speed cutter.

The gantry-type structure allows large quantities of scrap material to be fed into the machine and compressed before cutting.

This design is particularly suitable for recycling plants handling mixed metal scrap such as steel plates, structural steel pieces, and industrial fabrication waste.

The 4000 mm long compression box provides enough space for bulky and irregular scrap materials.

The compression system helps stabilize the scrap before cutting, improving cutting accuracy and efficiency.

The Q43L-3150 uses a 1300 mm cutting blade designed for stable operation under heavy loads.

The blade is manufactured from wear-resistant alloy steel to ensure long service life and reliable performance in industrial recycling environments.

The hydraulic system allows the machine to perform 3–4 cutting strokes per minute, which is ideal for controlled heavy scrap processing.

This cutting speed balances cutting force and system durability, ensuring long-term stable operation.

The machine is powered by two 37 kW motors, providing sufficient hydraulic power for compression and shearing operations.

This dual-motor configuration ensures consistent performance during continuous scrap processing.

The Q43L-3150 gantry scrap shear is designed with a 4000 × 1300 × 700 mm compression chamber that allows large scrap materials to be positioned and compressed before cutting.

The machine uses a 1300 mm industrial blade capable of handling medium-to-large steel scrap pieces.

During operation, the hydraulic system performs approximately 3–4 cutting strokes per minute, providing stable processing capacity for recycling facilities.

Power is supplied by a dual-motor hydraulic system with two 37 kW motors, ensuring sufficient power for both compression and cutting processes.

The Q43L-3150 gantry shear is suitable for cutting a wide range of scrap materials including:

Structural steel pieces
Steel plates and profiles
Industrial fabrication scrap
Metal processing waste
Construction steel scrap
Mixed steel scrap from recycling yards

These materials are commonly processed in metal recycling plants and steel processing facilities.

The Q43L-3150 improves scrap processing efficiency by combining compression and cutting in a single machine.

Large scrap materials are compressed into a stable position before cutting, allowing more efficient size reduction and improving material handling.

This reduces transportation costs, improves scrap storage efficiency, and prepares materials for downstream recycling processes such as furnace charging or further shredding.

The Q43L-3150 gantry shear is commonly installed as a core piece of equipment in scrap processing systems.

It can operate as part of a continuous recycling line or as an an independent cutting unit.

Typical system layouts include scrap feeding conveyors, gantry shear cutting units, and downstream scrap handling equipment.

The Q43L-3150 gantry scrap shear is widely used in:

Large metal recycling plants
Steel processing facilities
Industrial scrap preparation centers
Scrap trading yards
Construction steel recycling operations

These facilities require reliable equipment capable of processing large volumes of mixed scrap materials.

What type of scrap materials can the Q43L-3150 process?
The machine is designed for mixed steel scrap including structural steel pieces, plates, profiles, and fabrication waste.

Is the gantry shear suitable for continuous recycling lines?
Yes. The Q43L-3150 is commonly used in continuous scrap preparation systems in recycling facilities.

Why is a compression box used before cutting?
The compression box stabilizes bulky scrap materials before cutting, improving cutting efficiency and safety.

Can the machine operate continuously?
Yes. The machine is designed for continuous industrial operation with proper maintenance.

The Q43L-3150 gantry hydraulic scrap shear is supplied with a 12-month warranty covering hydraulic components, structural parts, and electrical systems under normal industrial use.

Technical support, spare parts supply, and maintenance services are available to ensure long-term reliable operation.

If your recycling facility requires a gantry-type hydraulic shear for continuous scrap preparation, the Q43L-3150 gantry scrap shear offers stable performance and efficient scrap processing.

Contact our engineering team for equipment consultation and project quotations.

Tell us your scrap material type and processing capacity, and we will recommend the most suitable scrap cutting solution.