195-27-00730 195-27-00720 Final Drive Assembly for Komatsu D375A-5E0 | Heavy

The Final Drive Assembly (195-27-00730 & 195-27-00720) is the high-torque propulsion unit engineered for the Komatsu D375A-5E0 mining bulldozer. As the updated "E0" series requires superior power-to-ground efficiency, this multi-stage planetary gearbox is designed to handle the massive drawbar pull and vertical shock loads generated during high-production ripping and overburden stripping in open-pit mines.

Restoring the "Muscle" of the D375A-5E0 Series The Komatsu D375A-5E0 is a benchmark for 100-ton class dozers, known for its balance of power and efficiency. The 195-27-00730 / 195-27-00720 Final Drive is the critical mechanical component that converts engine power into the ground-shredding torque required for heavy-duty ripping.

In mining, the final drive is constantly subjected to "recoil" forces when the ripper hits hard-rock formations. Our premium aftermarket units are engineered to exceed original performance standards. By utilizing precision-ground sun gears and high-load capacity planetary carriers, this assembly eliminates internal pressure hot-spots and reduces gear fatigue, ensuring your D375A-5E0 maintains its legendary pushing power shift after shift.

The D375A-5E0 is a global workhorse, and our drive assemblies are optimized for the following international mining environments:

• Australia & Oceania: Features reinforced "Mining-Grade" floating seals designed to repel the ultra-fine red dust of the Pilbara, preventing premature seal scoring and oil leakage.

• CIS Regions (Russia, Kazakhstan): Engineered with "Arctic-Spec" metallurgy to maintain structural toughness and housing ductility during high-torque cold starts in Siberian coal mines.

• North & South America: Optimized for high-altitude copper and gold mines where consistent gear lubrication and thermal resilience are vital for long-distance pushing on steep grades.

• Africa: Enhanced cooling properties within the gearbox housing to maintain oil viscosity and protect gear teeth in high-ambient desert temperatures.

For a machine of the D375A-5E0's caliber, maintenance is the key to ROI (Return on Investment).

• Magnetic Plug "Forensics": Regularly check the magnetic drain plug. While fine gray "dust" is normal, any distinct silver flakes indicate a bearing or gear is spalling. Catching this early can save the entire planetary set.

• Oil Level Discipline: Dozers frequently work on inclines. Ensure your gear oil is always at the full mark; even a slight oil deficit can lead to the upper gears running dry during sustained uphill pushes.

• Floating Seal Vigilance: Bulldozers tend to pack dirt into the final drive area. If you see oil weeping onto the track frame, replace the seal immediately. Once abrasive grit enters the gearbox, the gears are on a rapid countdown to failure.

• Sprocket Bolt Replacement: Never reuse old sprocket bolts. High-torque operations can stretch bolts beyond their elastic limit. Always use new Grade 10.9+ bolts and follow the multi-stage torque specs.

Guangzhou Tieqi Construction Machinery Co., Ltd. (IRON CAVALRY) is strategically located in Guangzhou's Huangpu District, approximately an hour from Baiyun International Airport. We have been a dedicated specialist in engineering machinery hydraulics for nearly 15 years.

Driven by our core values of "Pragmatism and Progress," we are committed to delivering practical solutions and upholding our responsibilities. This principle-driven approach defines all our operations and client partnerships.

In China's excavator hydraulic assembly sector, our efficient execution and rigorous approach to manufacturing every product to meet over 95% of original performance specifications have built widespread trust. This has made us a destination for industry peers and clients seeking knowledge and reliable supply.

Our capability is backed by a ready inventory of over 500 assembly types, providing access to more than 6,000 different parts. Hydraulic pump, control valve, travel, and swing assemblies are our core products, with a distinct advantage in large mining excavator components and hard-to-find items.

Our 4,000-square-meter factory in Guangzhou is equipped for professional manufacturing, precision assembly, rigorous testing, and quality certification, ensuring reliable performance and timely delivery for every order.

For large items, we use sturdy plywood crates secured with metal fasteners for added stability. Inside, the products are cushioned with bubble wrap and secured with wooden braces, while special attention is given to protecting vulnerable parts. Externally, the crates are reinforced with high-strength PET plastic strapping and wrapped in highly waterproof black film.

• One-stop solution provider for all your hydraulic component needs
• High-quality products at competitive prices
• Exceptional customer service that makes you feel at home
• Large inventory, short delivery times, and long warranty periods
• Professional expertise with accurate part number identification for excavator components