AVENTICS 0821401143 Penumatic Cylinder Compact Design High Reliability‌ Safety

Product Specification

Product Description:

Advantages and features of Anvotech cylinders

‌Compact design and high reliability‌

The cylinder adopts lightweight materials and square cylinder design, with compact structure and light weight, saving installation space and easy integration into space-constrained equipment.

Some models are equipped with cross ball guides or linear bearing guides, with low friction, smooth movement without looseness, strong torque resistance and excellent load performance.

‌High efficiency and diversified functions‌

Support high-pressure operation (up to 12 bar), low failure rate, suitable for high-frequency and high-intensity industrial scenarios, such as automated production lines and heavy handling.

Provide a variety of output forms (internal/external connecting rods) and installation methods (flanges, earrings, feet, etc.) to meet the connection requirements of different mechanical parts.

Some models have built-in pneumatic adjustable buffer devices to adjust the movement speed and impact force to reduce equipment wear.

‌Environmental adaptability and safety‌

Adopting fireproof and explosion-proof design, the full pneumatic control can withstand high temperature and humid environment, suitable for harsh working conditions such as metallurgy and chemical industry.

The sealing material is highly corrosion-resistant and, combined with precision manufacturing technology, ensures long-term use without leakage, and supports water-based media or emulsion scenarios.

‌Modularity and flexible adaptation‌

The product series covers standard cylinders, short-stroke cylinders, rodless cylinders and rotary cylinders, etc., with a stroke range from millimeters to 41.5 meters, meeting the driving needs of different scenarios.

Rodless cylinders achieve reciprocating motion through magnetic or cable transmission, saving space and improving motion efficiency, and are suitable for long-stroke, high-precision positioning scenarios.

Precautions for use

‌Installation and commissioning specifications‌

During installation, ensure that the direction of the cylinder arrow is consistent with the direction of the air source flow, and the fixing screws must be tightened evenly to avoid deformation of the piston rod caused by eccentric load.

Before starting for the first time, the cylinder shaft must be manually rotated to confirm flexibility, and the sealing of the pipeline interface must be checked to prevent air leakage.

‌Lubrication and medium management‌

The tail single/double-ear cylinder needs to be regularly filled with lubricating oil at the tail seat or swing shaft, and the oil-free cylinder needs to be greased on the sliding part every 6 months.

The air source needs to be equipped with a pre-filter and oil mist collector, and condensed water should be discharged regularly and the oil should be kept clean to prevent impurities from accelerating the wear of the seals.

‌Operation monitoring and maintenance‌

Regularly check the tightness of the cylinder connection parts (such as piston rods and end covers). If looseness is found, it should be handled in time to avoid falling off during operation.

In case of abnormal noise or vibration, it is necessary to check for problems such as aging of seals, wear of guide rails or insufficient lubrication, and shut down for maintenance if necessary.

‌Adaptation to special working conditions‌

It is recommended to shorten the lubrication cycle in high temperature environments and use high temperature resistant sealing materials; fluororubber sealing rings need to be replaced regularly in corrosive media scenarios.

Long-stroke rodless cylinders need to clean the surface of the magnetic slider regularly to prevent metal debris from affecting the motion accuracy.

With the above characteristics and specifications, Anvotech cylinders can be widely used in electronic manufacturing, medical equipment, engineering machinery and other fields, taking into account efficiency and durability.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.