Rexroth PGH5-3X 063RE11VU2 Internal Gear Pump Mechanical Seal Safety New

Product Specification

Product Description:

Advantages and features of Rexroth internal gear pumps

‌High efficiency and low noise operation‌

With an internal gear structure, the flow pulsation coefficient is only 2%-5% (significantly lower than the 10%-25% of an external gear pump), the output is more stable, and the system impact is small.

The operating noise is controlled at 50-60dB(A), which is much lower than the 70-80dB(A) of an external gear pump, and is suitable for noise-sensitive scenarios.

‌High pressure and high efficiency‌

Through axial clearance compensation technology, the working pressure can reach more than 250bar, and the volumetric efficiency and total efficiency are higher than those of external gear pumps.

Using high-strength materials and precision manufacturing processes, the sliding bearing design is adapted to heavy-load conditions and extends service life.

‌Flexible adaptation and versatility‌

Supports forward and reverse switching, and the liquid can be transported in reverse by changing the motor direction. Some models can also be used as hydraulic motors.

The modular combination design supports multi-pump parallel connection or combination with other types of pumps (such as radial piston pumps) to meet complex system requirements.

The drive shaft complies with ISO/SAE standards, which is convenient for integration with the hydraulic system, and the oil port layout is flexible to adapt to different scenarios.

‌Wide Media Adaptability‌

Applicable to non-corrosive media such as lubricating oil, hydraulic oil, fuel, etc. Some models can convey water-based or emulsions through corrosion-resistant seals and material optimization.

Insensitive to viscosity changes, it supports a medium temperature range as low as -10℃ or as high as 70℃.

Precautions for use

‌Startup and operation monitoring‌

Before the first start, the pump shaft needs to be manually rotated to confirm flexibility, and the tightness of the pipeline connection needs to be checked to avoid looseness and leakage.

The bearing temperature during operation needs to be controlled within the ambient temperature +35℃, and the maximum does not exceed 80℃ to prevent overheating damage.

‌Lubrication and Media Management‌

Regularly replace the bearing lubricating oil (100 hours for the first time, and every 500 hours thereafter), and keep the oil level at the centerline position.

Avoid conveying solid particles or corrosive media. If it is not used for a long time, the liquid in the pump needs to be drained, and anti-rust grease should be applied to the rotating parts.

‌System Configuration Optimization‌

In high pressure or high viscosity scenarios, it is necessary to configure a heat preservation/cooling interface to prevent the medium from affecting fluidity due to temperature changes.

If a filter or throttle is installed on the outlet side, it is necessary to ensure that the mechanical strength is adapted to the continuous discharge pressure of the pump to avoid overload.

‌Maintenance and Troubleshooting‌

Immediately stop and check when there is abnormal noise or vibration, focusing on problems such as gear wear, seal failure or insufficient bearing lubrication.

Clean oil contaminants regularly to prevent impurities from accelerating gear and bearing wear and reducing volumetric efficiency.

With the above characteristics and specifications, Rexroth internal gear pumps can be widely used in engineering machinery, metallurgical equipment, ship hydraulic systems and other scenarios, taking into account both efficiency and reliability.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.