AVENTICS 0511625602 Gear Motor Stainless Steel Safety High Quality New

Product Specification

Product Description:

Advantages and features of Anvochi gear pump

Compact and simple structure: Anvochi gear pump adopts a compact design, small size, light weight, easy to install and maintain.

Strong self-priming ability: It has good self-priming ability and can achieve self-priming at a certain height without external auxiliary equipment.

Strong anti-pollution ability: It is not sensitive to oil pollution and can adapt to relatively harsh working environment.

Easy maintenance: Due to its simple structure, maintenance is relatively easy, the working stability is high, and long-term stable operation can be guaranteed.

Wide range of application: It is suitable for a variety of lubricating oil media, such as heavy oil, fuel oil, mechanical oil, etc.

High-efficiency filtration system: The filter of Anvochi gear pump factory adopts filter disc filtration technology with special structure, which has sensitive performance and can choose different precision filtration according to needs.

Precautions for the use of Anvochi gear pump

Medium requirements:
It is not possible to transport mixtures containing particles, otherwise it is easy to cause serious wear of gears.

The viscosity of the medium used should be within a certain range, such as 2~120Cst at a temperature of 40℃. Too high viscosity will cause motor overload.
The working oil temperature range is -20 to 80℃.

Installation and startup:
Clean the pipes, valves and other equipment during installation, check and adjust the connection, sealing, assembly and other conditions of each component.
Open the inlet valve before starting, operate the exhaust valve to remove the air, and then start the pump.
There must be a filter device at the suction end, with a filtration accuracy of 50㎛ or more, and the suction pipe length should not exceed 90cm as much as possible.

Operation monitoring:
When the pump is running, regularly check whether the pressure, temperature and other parameters are normal, and pay attention to prevent the occurrence of pump corrosion, water hammer and leakage.
It is not advisable to work under conditions exceeding the rated pressure, otherwise it will overload the prime mover, increase the bearing load, and deform the working parts, increase wear and leakage.

Maintenance:
Regularly maintain and maintain the pump, check whether the gears, bearings, seals, oil seals and other parts are worn and aged, and need to be replaced in time.
When repairing or replacing accessories, it is necessary to shut down, cut off the power, and strengthen safety measures.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.