| Number of Ports | 1 |
| Stock | 12000 |
| Operating Temperature | -20℃~+60℃ |
| Voltage Rating | 30V |
| Packaging Details | SMD |
| Description | USB-C (USB TYPE-C) Receptacle Connector 24 Position Surface Mount, Right Angle |
| Number of Contacts | 24P |
| Mounting Type | Surface Mount, Right Angle |
| Current Rating | 3A |
| Gender | Female |
| Connector Type | Type-C |
| Delivery Time | 5-6 weeks |
| Brand Name | HOOYA |
| Model Number | USB-310D-B-SU |
View Detail Information
Explore similar products
Hanbo Electronic MC-401AL65-Z09
JAE Electronics DC3RX19JA2R1700
TE Connectivity 2023347-2
DEALON USB-TYPE-C-016
Product Specification
| Number of Ports | 1 | Stock | 12000 |
| Operating Temperature | -20℃~+60℃ | Voltage Rating | 30V |
| Packaging Details | SMD | Description | USB-C (USB TYPE-C) Receptacle Connector 24 Position Surface Mount, Right Angle |
| Number of Contacts | 24P | Mounting Type | Surface Mount, Right Angle |
| Current Rating | 3A | Gender | Female |
| Connector Type | Type-C | Delivery Time | 5-6 weeks |
| Brand Name | HOOYA | Model Number | USB-310D-B-SU |
This section details the electrical and environmental performance specifications of the HS45E product from HAOYU (HONG KONG) LIMITED, adhering to various EIA and MIL-STD test methods. It covers critical parameters such as insulation resistance, contact resistance, dielectric strength, contact current rating, temperature life, thermal shock, and salt spray resistance.
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7.1 Insulation Resistance | Unmated connectors, apply 100Volts DC between adjacent contacts and contacts and ground. | EIA 364-21C | 100M minimum (unmated) |
| 7.2 Low Level Contact Resistance | 100m A max., 20mV Max. open circuit at 100mA Max. | EIA 364-23b | 40m(Max) initial for VBUS and GND contacts and all other contacts; delta Max. 10m(Max) after test |
| 7.3 Dielectric Withstanding Voltage | Subjected to 100VAC (RMS) for 1 minute between adjacent terminals. | EIA 364-20 | There shall be no breakdown |
| 7.4 Contact Current Rating | 5.0A shall be applied collectively to VBUS pins and 1.25 A applied to the VCONN pin and 0.25 A the other contacts. | EIA364-70 | When the currents are applied to the contacts, the temperature rise shall not exceed 30 C at any point on the USB Type-C mated plug and receptacle under test, when measured at an ambient temperature of 25 C. |
| 6.1 Durability | Type C :10000 cycles | EIA 364-09 | Must meet the following criteria after the cycle test is completed: Contact resistance (40m > delta 10m (Max) after test), Insertion force (5N to 20N), Extraction force (8N to 20N), Visual inspection (no exposed base metal on contacts) |
| 6.2 Cable Flexing | 100 cycles in each of 2 planes 120 degree. Dimension x=3.7x cable diameter | EIA 364-41 | No discontinuity over 1 microsecond During flexing or physical damage allowed |
| 6.3 Cable Pull-Out | 40 N steady state axial load for 1 minute | EIA-364-38 | No discontinuity or physical damage allowed |
| 6.4 4-axes continuity test | 8N tensile force for a period of 10 seconds Min; The specimen must subject to 0 ,90 ,180 ,270 direction. | EIA364-18 | No discontinuity greater than lus and no physical damage to the specimen(one cable per test) |
| 8.1 Temperature Life | 105 C without applied voltage for 120 hours. 105 C without applied voltage for 72 hours when used as preconditioning in EIA 364-1000.01. | EIA 364-17 | Visual inspection, Test shall be done in sequences defined in EIA 364-1000.01. |
| 8.2 Thermal Shock | 10 Cycles - 55C and +85C. The USB 3.0 connectors under test must be mated. | EIA 364-32 | There shall be no evidence of any physical damage. |
| 8.3 Salt Spray | Subject mated connectors to 48 hours at 35 C with 5%-Salt-solution concentration. | MIL-STD-202F, Method 101D, Test Condition B | 1).Shall meet visual requirement, show no physical damage. 2).Shall meet requirements of additional tests as specified in test sequence in Section 5 |
Company Details
Business Type:
Manufacturer
Year Established:
2009
Employee Number:
500~600
Ecer Certification:
Verified Supplier
We are a professional manufacturer specializing in data and signal communication connectors for industrial equipment, automation systems, control cabinets, communication devices, and other electronic applications. We focus on providing reliable connector solutions for applications where stable sig... We are a professional manufacturer specializing in data and signal communication connectors for industrial equipment, automation systems, control cabinets, communication devices, and other electronic applications. We focus on providing reliable connector solutions for applications where stable sig...
Get in touch with us
Leave a Message, we will call you back quickly!