Shenzhen ECER Network Technology Co., Ltd.
| Description | USB-A (USB TYPE-A) Receptacle Connector 4 Positionx2 Right Angle |
| Number of Ports | 2 |
| Voltage Rating | 30V |
| Gender | Female |
| Connector Type | Type-A |
| Connect-Disconnect Life | 5,000 times |
| Delivery Time | 1 working day |
| Number of Contacts | 4Px2 |
| Packaging Details | Through Hole,Right Angle |
| Stock | 3947 |
| Detection color | White |
| Operating Temperature | -25℃~+85℃ |
| length | 17.6mm |
| Mounting Type | Right Angle |
| Current Rating | 1.5A |
| Model Number | AF SS-JB17.6 |
| Brand Name | AF SS-JB17.6 |
View Detail Information
Explore similar products
G-Switch GT-USB-7038A
JST UB-MC5BR3-SD204-4S-1-TB
MH CONNECTORS T-JS-03010
L-com DML015S
Product Specification
| Description | USB-A (USB TYPE-A) Receptacle Connector 4 Positionx2 Right Angle | Number of Ports | 2 |
| Voltage Rating | 30V | Gender | Female |
| Connector Type | Type-A | Connect-Disconnect Life | 5,000 times |
| Delivery Time | 1 working day | Number of Contacts | 4Px2 |
| Packaging Details | Through Hole,Right Angle | Stock | 3947 |
| Detection color | White | Operating Temperature | -25℃~+85℃ |
| length | 17.6mm | Mounting Type | Right Angle |
| Current Rating | 1.5A | Model Number | AF SS-JB17.6 |
| Brand Name | AF SS-JB17.6 |
Product Name: USB AF SS-JB17.6
Manufacturer: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
Contact: Tel: 0755-27597601, Fax: 0755-27597491
RATING: DC 30V 1.5A
PRACTICAL TEMPERATURE RANGE: -25~85C
STANDARD ATMOSPHEIC CONDITIONS:
Temperature: 5 to 35
Humidity: 45% to 85%
Pressure: 86Kpa to 106Kpa
AF
SS-JB17.6
| Item | Test Conditions | Performance | |||
|---|---|---|---|---|---|
| 1 | CONNECTION FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | PLUG GAUGE 3 | 35N | |
| 2 | DISCONNECTION FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | PLUG GAUGE 3 | 10N MIN | |
| 3 | TERMINAL STRENGTH | A STATIC LOAD OF 0.1N/m(1kgf/cm)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MIN IN ANY DIRECTION | 1 0.1N/m(1kgf/cm). THERE SHALL BE NO DAMAGE TO THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY ELECTRICAL ,AND MECHANICAL CHARACTERISTICS SHALL BE SATISFIED | ||
| 3.1 | CONTACT RESISTANCE | MEASURED AT SMALL CURRENT 100m A OR LESS 1000Hz | 100 m A | 30m MAX | |
| 3.2 | INSULATION RESISTANCE | APPLY A VOLTAGE OF 100V DC FOR 1 MIN TO FOLLOWING PORTIONS AFTER WHICH MEASUREMENT SHALL BE MADE: (1) BETWEEN BODY AND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACT (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED | 100V DC 1 1 2 3 | 1000M MIN | |
| 3.3 | DIELECTRIC STRENGTH | AC 500V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA (1) BETWEEN BODYAND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACL (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED | AC 500V 50Hz/min 1 0.5mA, : (1) (2) (3) | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC | |
| 4.1 | SOLDERABILITY TEST | (1) THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2305 FOR 30.5 SECONDS (2) THE AREA OF SOLDERING SHOULD BE OVER 75% | 1 1mm ,2305,3 0.5 2 75% | SOLDER WETTING TIME SHALL BE 3 SEC OR LESS | 3 |
| 4.2 | RESISTANCE TO SOLDERING HEAT TEST | REFLOW SOLDERING CONDITIONS: PREHEAT:TEMPERATURE ON THE COPPER FOIL SURFACE SHOULD REACH 180 .120 S AFTER THE P.C.B ENTERED INTO THE SOLDERING EQUIPMENT. TALLEST TEMPERATURE:TEMPERATURE ON THE COPPER FOIL SURFACE SHOULD REACH THE PEAK IN 5 TEMPERATURE OF 2305 WITH SECONDS. WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | :180,120s :23055 | ||
| 4.2 | RESISTANCE TO SOLDERING HEAT TEST | SOLDERING IRON METHOD: BIT TEMPERATURE 3305 APPLICATION TIME OF SOLDERING IRON30.5 SEC HOWEVER EXCESSIVE PRESSURE SHALL NOT BE APPLIED TO THE TERMINAL WITHOUT DEFORMATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | 3305 30.5 | ||
| 4.3 | HUMIDITY TEST | THE JACK SHALL BE STORED AT A TEMPERATURE OF 402 AND A HUMIDITY OF 90%TO 96% FOR 96 HR,THEN THE JACK SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr FOR OTHER PROCEDURES | 40290~96% Hr 96 1 | THERE SHALL BE NO DAMAGE ON APPEARANCE MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |
| 4.4 | HEAT TEST | THE JACK SHALL BE STORED AT A TEMPERATURE OF702 FOR 96 HOURSAND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY MBASURBM | 70296 1 | THERE SHALL BE NO DAMAGE ON APPEARANCE MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |
| 4.5 | COLD TEST | THE JACK SHALL BE STORED AT A TEMPERATURE OF-253 FOR 96 HOURS AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR AFTER WHICH | -25396 1 | THERE SHALL BE NO DAMAGE ON APPEARANCE MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |
| 4.6 | LIFE TEST | CONNECTION AND DISCONNECTION SHALL BE MADE 5000 CYCLES AT A SPEED 10 TO 20 CYCLES / MIN WITHOUT LOAD CONNECTION AND DISCONNECTION SHALL BE MADE WITH THE MATING PLUGS AND JACKS FOR 5000 CYCLES AT A SPEED OF 10 TO 25 CYCLES/MIN | ()1 10-20 5000 Plug()1 10-255000 | (1) CONTACT RESISTANCE SHALL BE 0.1 (2) DISCONNECTION FORCE SHALL BE 0.8 TO 2.0N (3) MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | (1) 0.1 (2) 0.8~2.0N (3) :, |
| 4.7 | TEMPARATURE CYCLING TEST | THE JACK SHALL BE SUB JECTED TO 5 CYCLES OF THE FOLLOWING CONDITIONS SHOWED IN THE FIGURE,AND THEN SHALL RETURNED ALLOWED TO REMAIN IN ROOM AMBIENT CONDITION FOR 30 MINUTES | 5 30 | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION EXTRACTION FORCE:3 TO 20N CONTACT RESISTANCE:MAX.30M INSULATION RESISTANCE: MIN.100 M DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN(BETWEEN TERMINALS) | 3N 20N 30m 100 M 100VAC |
| 4.8 | COLD&HEAT SHOCK TEST | THE JACK SHALL BE SUBJECTED TO5 CYCLES OF THE FOLLOWING CONDITIONS SHOWED IN THE FIGURE,AND THEN SHALL RETURNED AND ALLOWED TO REMAIN IN ROOM AMBIENT CONDITION FOR 30 MINUTES | 5 30 | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION EXTRACTION FORCE:3 TO 25N CONTACT RESISTANCE:MAX.30M INSULATION RESISTANCE: MIN.100 M DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MIN(BETWEEN TERMINALS) | 3N 25N 30m 100 M 500VAC |
Company Details
Business Type:
Manufacturer
Year Established:
2009
Employee Number:
500~600
Ecer Certification：
Verified Supplier
We are a professional manufacturer specializing in data and signal communication connectors for industrial equipment, automation systems, control cabinets, communication devices, and other electronic applications. We focus on providing reliable connector solutions for applications where stable sig... We are a professional manufacturer specializing in data and signal communication connectors for industrial equipment, automation systems, control cabinets, communication devices, and other electronic applications. We focus on providing reliable connector solutions for applications where stable sig...
Get in touch with us
Leave a Message, we will call you back quickly!