Beijing Silk Road Enterprise Management Services Co., Ltd.
| Current - Saturation (Isat) | 2.2A |
| Description | 2.2A SMD,4x4mm Fixed Inductors RoHS |
| Mfr. Part # | PNLS4010-1R0M 1UH |
| Package | SMD,4x4mm |
| Model Number | PNLS4010-1R0M 1UH |
View Detail Information
Explore similar products
Compact size inductors CENKER CKCS4018-4.7uH M suitable for integration in space
epoxy coated axial inductor CENKER CKL0307-2.2uH K CCA T for in radios
Durable SMD Power Inductor CND-tek MHT0630SG-8R2M H with Defined Saturation and
Metal dust core power inductor COILMX MS0850-2R2M designed for frequencies up to
Product Specification
| Current - Saturation (Isat) | 2.2A | Description | 2.2A SMD,4x4mm Fixed Inductors RoHS |
| Mfr. Part # | PNLS4010-1R0M 1UH | Package | SMD,4x4mm |
| Model Number | PNLS4010-1R0M 1UH |
The PNLS Series Chip Power Inductor is a wire-wound inductor designed for a wide range of electronic applications. It features a closed magnetic circuit design for reduced leakage flux and EMI, metallization on the ferrite core for enhanced durability, and low DCR for minimal power loss. Its compact and slim profile minimizes PCB space. This series is widely used in smart phones, set-top boxes, VR/AR devices, notebooks, desktop computers, servers, portable gaming devices, personal navigation systems, and multimedia devices.
| Product Type | External Dimensions (LW) (mm) | Nominal Inductance | Inductance Tolerance | Fig. | A | B | C (max) | D (max) | E (max) |
| PNLS252010 | 2.01.6 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.1 | 2.50.3 | 2.00.35 | 1.05 | 2.1 | 0.85 |
| PNLS252012 | 2.01.6 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.1 | 2.50.3 | 2.00.35 | 1.25 | 2.0 | 0.85 |
| PNLS3010 | 3.03.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.1 | 3.00.3 | 3.00.35 | 1.20 | 2.5 | 0.85 |
| PNLS3012 | 3.03.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 3.00.3 | 3.00.35 | 1.30 | 2.8 | 0.90 |
| PNLS3015 | 3.03.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 3.00.3 | 3.00.35 | 1.50 | 2.6 | 0.90 |
| PNLS4010 | 4.04.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 4.00.3 | 4.00.35 | 1.15 | 3.5 | 1.30 |
| PNLS4012 | 4.04.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 4.00.3 | 4.00.35 | 1.35 | 3.5 | 1.30 |
| PNLS4018 | 4.04.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 4.00.3 | 4.00.35 | 1.80 | 3.5 | 1.30 |
| PNLS4020 | 4.04.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 4.00.3 | 4.00.35 | 2.10 | 3.5 | 1.30 |
| PNLS4026 | 4.04.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 4.00.3 | 4.00.35 | 2.80 | 3.5 | 1.30 |
| PNLS4030 | 4.04.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 4.00.3 | 4.00.35 | 3.00 | 3.5 | 1.30 |
| PNLS5012 | 5.05.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 5.00.3 | 5.00.35 | 1.30 | 4.0 | 1.50 |
| PNLS5020 | 5.05.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 5.00.3 | 5.00.35 | 2.00 | 4.0 | 1.50 |
| PNLS5040 | 5.05.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 5.00.3 | 5.00.35 | 4.00 | 4.0 | 1.50 |
| PNLS5045 | 5.05.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 5.00.3 | 5.00.35 | 4.50 | 4.0 | 1.50 |
| PNLS6012 | 6.06.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.3 | 6.00.3 | 6.00.35 | 1.30 | 5.0 | 1.65 |
| PNLS6020 | 6.06.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.2 | 6.00.3 | 6.00.35 | 2.00 | 5.0 | 1.65 |
| PNLS6030 | 6.06.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.3 | 6.00.3 | 6.00.35 | 3.00 | 5.0 | 1.85 |
| PNLS6045 | 6.06.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.3 | 6.00.3 | 6.00.35 | 4.50 | 5.0 | 1.65 |
| PNLS6050 | 6.06.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.3 | 6.00.3 | 6.00.35 | 5.30 | 5.0 | 1.65 |
| PNLS6060 | 6.06.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.3 | 6.00.3 | 6.00.35 | 6.30 | 5.0 | 1.65 |
| PNLS8040 | 8.08.0 | R10, 1R0, 100 | K (10%), M (20%), N (30%) | Fig.3 | 8.00.3 | 8.00.35 | 4.20 | 6.3 | 2.45 |
| Parameter | Specification |
| Operating Temperature Range | -40 to +85 |
| Storage Temperature Range | -10 to +40, 70% RH |
| Test Conditions (Standard) | Ambient Temperature: 2015, Relative Humidity: 6520%, Air Pressure: 86 kPa to 106 kPa |
| Test Conditions (If Doubt) | Ambient Temperature: 202, Relative Humidity: 655%, Air Pressure: 86kPa to 106 kPa |
| Solderability | 95% min. coverage of all metallized area. Solder temp: 2405, Immersion time: 31 sec. Solder: Sn-3Ag-0.5Cu |
| Resistance to Solder Heat | No visible damage. Electrical and mechanical characteristics shall be satisfied. Solder Temp: 2653, Immersion time: 61 sec. Preheating: 100-150 for 1 min. Measurement after 242 hrs at room temp. Solder: Sn-3Ag-0.5Cu |
| Bend | No deformation. Inductance within 20%, DC resistance meets standard. Test: bend substrate by 2mm, hold for 10s. |
| Vibration | Appearance: no mechanical damage. Inductance change within 20%. Waveform: Sine wave, Frequency: 10~55~10 Hz, Sweep time: 1min, Amplitude: 1.5mm(peak-peak). Axes: X,Y,Z (3 axes). Duration: 2 hrs/axis, total 6 hrs. |
| Temperature Shock | Appearance: no mechanical damage. Inductance change within 20%. Temperature: -40, +85 (30 min each). Cycles: 5. Measurement after 24 hrs at room temp. |
| Humidity Resistance | Appearance: no mechanical damage. Inductance change within 20%. Humidity: 90-95% RH. Temperature: 602. Applied current: Rated current. Testing time: 1000 (+48,0) hours. Measurement after 24 hrs at room temp. |
| High Temperature Resistance | Appearance: no mechanical damage. Inductance change within 20%. Temperature: +852. Applied current: Rated current. Testing time: 1000 (+48,0) hours. Measurement after 24 hrs at room temp. |
| Low Temperature Storage Life | Appearance: no mechanical damage. Inductance change within 20%. Temperature: -402. Testing time: 1000 (+48,0) hours. Measurement after 24 hrs at room temp. |
| Terminal Strength | No deformation. Inductance change within 20%. DC resistance meets standard. Test: 10N thrust for 10 sec (2N for 0603[0201]). |
| Drop | No failure after test. Drop on concrete or steel board. Method: free fall. Height: 100cm. Drop direction: 3 directions. Total times: 3 times per direction (9 times total). |
| Salt Mist | Appearance: no mechanical damage. Inductance change within 20%. Concentration of salt solution: (50.1)%. PH: 6.5-7.2. Time: 482h. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!