axial fixed inductor LanTu Micro AL0410-331K with tape packaging and REACH

Product Specification

Axial Fixed Inductors - AL0410 Series

Product Overview
The AL0410 Series Axial Fixed Inductors are designed for high-frequency applications, offering a wide inductance range in a compact, lightweight package. These RF chokes feature an epoxy resin coating for humidity resistance and long service life. They are ideal for use in various electronic products, including televisions, personal computers, radios, telephones, and chargers. Key advantages include high Q factors, self-resonant frequencies, and tape packaging for automated insertion, ensuring RoHS, Halogen Free, and REACH compliance.

Product Attributes

• Brand: SHENZHEN LANTU MICRO ELALTRIC TALHNOLOGY CO., LTD.
• Product Type: Axial Fixed Inductors
• Series: AL0410
• Coating: Epoxy resin
• Certifications: RoHS, Halogen Free, REACH Compliance
• Packaging Options: Tape packaging for auto-insertion, Bulk Package

Technical Specifications

Environmental Data

• Operating Temperature: -25 to +85 (Including coils self-temperature rise)

Dimensions

External Dimensions (LH): 4.0 10.5 mm (for AL0410 series)

Product Identification

Model Format: AL 0410 [Inductance Value] [Tolerance] [Packaging]

• Inductance: e.g., 100 for 10 H
• External Dimensions (LWH): 0410 (4.010.5 mm)
• Type: AL (Axial Fixed Inductors)
• Inductance Tolerance: J: 5%, K: 10%, L: 15%, M: 20%, P: 25%, N: 30%
• Packaging: B (Bulk Package), TF (Tape Package)

Color Coding

Nominal inductance values are marked with color codes as per the table provided in the source document.

Test Equipment

• Inductance (L): HP4284A, HP4285A LCR meter or equivalent
• Current (Isat & Irms): HP4284+42841A
• Self-Resonant Frequency (SRF): HM 9461
• Q Factor: HP4285A
• DC Resistance (DCR): Chroma 16502 or equivalent

Packaging Information

• Tape and Reel Specifications: Available in tape packaging for auto-insertion. Specific dimensions for tape and reel are provided in the source document.
• Quantity per Reel (T5A): 2000 pcs
• Carton Quantity: 48,000 pcs

Reliability Testing

The AL0410 series undergoes various reliability tests including Terminal Strength, Resistance to Flexure, Dropping, Solderability, Vibration, Thermal Shock, Low temperature Storage, High temperature Storage, Damp Heat (Steady States), Heat endurance of Reflow soldering, Resistance to solvent test, Overload test, and Voltage resistance test, with specified requirements and test methods detailed in the source document.

Recommended Lead-free Wave Soldering Curve (DIP-Type)

A recommended lead-free wave soldering curve is provided as a reference. Users should adjust and confirm soldering conditions based on their specific environment and equipment.

Usage Precautions

• Storage Period: Within 12 months under conditions of 5~40C and 35~65% RH.
• Environment: Avoid use and storage in corrosive gas environments (salt, acid, alkali, etc.).
• Handling: Avoid direct contact with terminals due to hand oils; handle with care to prevent damage.
• Terminal Bending: Do not excessively bend terminals to prevent wire fracture.
• Cleaning: Do not rinse coils; contact the manufacturer if cleaning is necessary.
• Magnetic Fields: Keep away from magnets or magnetic objects.
• Preheating: Preheating is required before soldering, with a temperature difference not exceeding 150C between solder and chip temperature.
• Soldering Correction: Post-mounting soldering corrections should adhere to specified conditions to avoid short circuits, performance degradation, or reduced lifespan.
• Self-Heating: Account for self-heating (temperature increase) during operation in thermal design.
• Non-Magnetic Shield Type: Careful coil layout is required on the PCB to prevent malfunctions due to magnetic interference.