Beijing Silk Road Enterprise Management Services Co., Ltd.
| Attenuation Value | 20dB@1GHz |
| Number of Channels | 2 |
| Resistance | - |
| Inductance | 140nH |
| Operating Temperature | -55℃~+125℃ |
| Capacitance | 80pF |
| Voltage Rating | 10V |
| Current Rating | 20mA |
| Filter Order | 4 |
| Frequency - Cutoff or Center | 50MHz |
| ESD Protection | No |
| Description | 2 140nH 80pF 4 50MHz SMD-10P,2x1.2mm EMI/RFI Filters (LC, RC Networks) RoHS |
| Mfr. Part # | NFA21SL506X1A48L |
| Package | SMD-10P,2x1.2mm |
| Model Number | NFA21SL506X1A48L |
View Detail Information
Explore similar products
Integrated coil and ESD diode common mode EMI filter Nexperia PCMF3USB3BA/CZ for
Low insertion loss EMI filter Nexperia PCMF3HDMI14SZ designed for effective
Nexperia IP4252CZ16-8-TTL 1 8 channel RC low pass filter array with ESD
Two channel common mode EMI filter Nexperia PCMF2HDMI14SZ with ESD protection
Product Specification
| Attenuation Value | 20dB@1GHz | Number of Channels | 2 |
| Resistance | - | Inductance | 140nH |
| Operating Temperature | -55℃~+125℃ | Capacitance | 80pF |
| Voltage Rating | 10V | Current Rating | 20mA |
| Filter Order | 4 | Frequency - Cutoff or Center | 50MHz |
| ESD Protection | No | Description | 2 140nH 80pF 4 50MHz SMD-10P,2x1.2mm EMI/RFI Filters (LC, RC Networks) RoHS |
| Mfr. Part # | NFA21SL506X1A48L | Package | SMD-10P,2x1.2mm |
| Model Number | NFA21SL506X1A48L |
The NFA21S Series Chip EMIFIL LC Combined Array is designed for noise suppression by conducting high-frequency noise elements to ground. It is suitable for applications requiring effective filtering and is available in various configurations to meet specific performance needs.
| MURATA Part Number | Cut-off Frequency [MHz] | Insertion Loss (I.L.)(dB min.) | Insulation Resistance [M min.] | Rated Voltage [V(DC)] | Rated Current [mA(DC)] | Withstanding Voltage [V(DC)] | Capacitance (typ.) | Inductance (typ.) |
| NFA21SL506X1A48L | 50 | *1 (0~6dB) | 30 | 1000 | 10 | 20 | 80pF | 140nH |
| NFA21SL506X1A48B | 50 | *1 (0~6dB) | 30 | 1000 | 10 | 20 | 80pF | 140nH |
| NFA21SL806X1A48L | 80 | *2 (2~7dB) | 25 | 1000 | 10 | 20 | 75pF | 79nH |
| NFA21SL806X1A48B | 80 | *2 (2~7dB) | 25 | 1000 | 10 | 20 | 75pF | 79nH |
| NFA21SL207X1A45L | 200 | *2 | 25 | 1000 | 10 | 100 | 42pF | 29nH |
| NFA21SL207X1A45B | 200 | *2 | 25 | 1000 | 10 | 100 | 42pF | 29nH |
| NFA21SL207X1A48L | 200 | *2 | 25 | 1000 | 10 | 100 | 42pF | 29nH |
| NFA21SL207X1A48B | 200 | *2 | 25 | 1000 | 10 | 100 | 42pF | 29nH |
| NFA21SL307X1A45L | 300 | *2 | 20 | 1000 | 10 | 100 | 22pF | 29nH |
| NFA21SL307X1A45B | 300 | *2 | 20 | 1000 | 10 | 100 | 22pF | 29nH |
| NFA21SL307X1A48L | 300 | *2 | 20 | 1000 | 10 | 100 | 22pF | 29nH |
| NFA21SL307X1A48B | 300 | *2 | 20 | 1000 | 10 | 100 | 22pF | 29nH |
| NFA21SL287V1A45L | 280 | 6 max. | 25 min. | 1000 | 10 | 100 | 15pF | 37nH |
| NFA21SL287V1A45B | 280 | 6 max. | 25 min. | 1000 | 10 | 100 | 15pF | 37nH |
| NFA21SL287V1A48L | 280 | 6 max. | 25 min. | 1000 | 10 | 100 | 15pF | 47nH |
| NFA21SL287V1A48B | 280 | 6 max. | 25 min. | 1000 | 10 | 100 | 15pF | 47nH |
| NFA21SL317V1A45L | 310 | 6 max. | 20 min. | 1000 | 10 | 100 | 8pF | 37nH |
| NFA21SL317V1A45B | 310 | 6 max. | 20 min. | 1000 | 10 | 100 | 8pF | 37nH |
| NFA21SL317V1A48L | 310 | 6 max. | 20 min. | 1000 | 10 | 100 | 8pF | 47nH |
| NFA21SL317V1A48B | 310 | 6 max. | 20 min. | 1000 | 10 | 100 | 8pF | 47nH |
| NFA21SL337V1A45L | 330 | 6 max. | 15 min. | 1000 | 10 | 100 | 4pF | 37nH |
| NFA21SL337V1A45B | 330 | 6 max. | 15 min. | 1000 | 10 | 100 | 4pF | 37nH |
| NFA21SL337V1A48L | 330 | 6 max. | 15 min. | 1000 | 10 | 100 | 4pF | 47nH |
| NFA21SL337V1A48B | 330 | 6 max. | 15 min. | 1000 | 10 | 100 | 4pF | 47nH |
| Item | Specification | Test Method |
| Operating Temperature | -55C to +125C (Includes self-heating.) | |
| Storage Temperature | -55C to +125C | |
| Standard Testing Condition | Temperature: Ordinary Temp. / 15 C to 35 C, Humidity: Ordinary Humidity / 25 %(RH) to 85 %(RH), Atmospheric pressure: 86 kPa to 106 kPa | Unless otherwise specified |
| In case of doubt Testing Condition | Temperature: 20 C 2 C, Humidity: 60 %(RH) to 70 %(RH) | |
| Dimensions (T) | NFA21SL1A45: 0.5 0.1 mm, NFA21SL1A48: 0.850.1 mm | |
| Unit Mass | NFA21SL1A45: 0.007g (Typical), NFA21SL1A48: 0.012g (Typical) | |
| Insertion Loss Measurement | Based on MIL-STD-220 | |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. | Ethanol solution of rosin, 25(wt)%, Pre-heat: 150C, 60 s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 245 3C, Immersion Time: 31 s, Immersion and emersion rates: 25mm / s |
| Resistance to Soldering Heat | Meet Table 1. | Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 150C, 60 s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 270 5C, Immersion Time: 10 1 s, Immersion and emersion rates: 25mm / s |
| Resistance to Soldering Heat (Reflow) | Meet Table 1. | Pre-heat: 150~180C, 9030 s, Heating: 230 C min., 60 s max., Peak Temperature: 260 C, 10 s max., Solder: Sn-3.0Ag-0.5Cu, The number of Times: 2 times |
| Drop Test | Products shall be no failure after tested. | Method: Free fall, Height: 1m, Attitude: 3 directions, The Number of Time: 3 times for each direction (Total 9 times) |
| Bonding Strength | The electrodes shall be no failure after tested. | Applying Force (F): 9.8 N, Applying Time: 30 s |
| Vibration Test | Meet Table 1. | Oscillation Frequency: 10 to 2000 to 10Hz for 20 minutes. Total amplitude 1.5 mm or Acceleration amplitude 196m/s2 whichever is smaller. Time: A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours) |
| Bending Strength | Products shall be no failure after tested. | Deflection: 2.0 mm, Keeping Time: 30 s |
| Temperature Cycling | Meet Table 1. | 1 Cycle: -55 03 C / 30 30 min -> Room Temp. / within 3 min -> +125 30 C / 30 30 min -> Room Temp. / within 3 min. Total of 100 cycles. |
| Humidity Test | Temperature: 40 2 C, Humidity: 90 to 95%(RH), Time: 500 240 hours | |
| Heat Life Test | Temperature: 125 2 C, Test Voltage: Rated Voltage 200%, Charge Current: 50 mA max., Time: 1000 480 hours | |
| Taping Specification | Packing quantity: 4000 pcs. / reel | |
| Taping Specification | Sprocket Hole: to the right as the tape is pulled toward the user. | |
| Taping Specification | Spliced point: The cover tape have no spliced point. | |
| Taping Specification | Missing components number: within 0.1% of the number per reel or 1 pc., whichever is greater, and are not continuous. | |
| Pull Strength of Plastic Tape and Cover Tape | Plastic tape 5N min., Cover tape 10N min. | |
| Peeling off force of cover tape | 0.2N to 0.7N (minimum value is typical) | Speed of Peeling off: 300 mm / min |
| Leader-tape, Trailer and Reel Dimensions | Leader: 190 mm min. (top tape and empty tape), Trailer: empty tape | |
| Reel Marking | Customer part number, MURATA part number, Inspection number, RoHS marking, Quantity, etc. | |
| Outside package Marking | Customer name, Purchasing Order Number, Customer Part Number, MURATA part number, RoHS marking, Quantity, etc. | |
| Outer Case Dimensions | W: 186 mm, D: 186 mm, H: 93 mm (Typical) | For 5 Reels |
| Standard Land Dimensions for Reflow | See diagram in source document for detailed dimensions (e.g., Copper foil pattern, Resist, Small diameter thru hole) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!