| Voltage Rating | 50V |
| Capacitance | 47nF |
| Temperature Coefficient | M3L |
| Tolerance | ±5% |
| Description | 47nF ±5% 50V Ceramic Capacitor M3L 1206 |
| Mfr. Part # | 1206M3L473J500NT |
| Package | 1206 |
| Model Number | 1206M3L473J500NT |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Voltage Rating | 50V | Capacitance | 47nF |
| Temperature Coefficient | M3L | Tolerance | ±5% |
| Description | 47nF ±5% 50V Ceramic Capacitor M3L 1206 | Mfr. Part # | 1206M3L473J500NT |
| Package | 1206 | Model Number | 1206M3L473J500NT |
High-voltage multilayer ceramic capacitors (MLCCs) designed for coupling, filtering, and resonance applications in high-voltage electronic circuits. These capacitors are suitable for use in switching power supplies, AC-DC and DC-DC converters, network/communication interfaces, LCD module backlight power supplies, and energy-saving lamp ballasts.
Standard Conditions:
Standard Relative Conditions:
Product Name Composition:
| Item No. | Description | Explanation |
|---|---|---|
| Product Size Code | 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2211, 2225 | |
| Temperature Characteristics | C0G (030 PPM/), X7R (15%) | |
| Nominal Capacitance | Three-digit method (e.g., 473 = 47nF) | |
| Capacitance Tolerance | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G:2%, J:5%, K:10%, M:20%, Z:+80%/-20% | |
| Rated Voltage (DC) | Three-digit method (e.g., 500 = 50V, 101 = 100V, 151 = 150V) | |
| Terminal Material | Copper-Nickel-Tin (from inside to outside) | |
| Packaging Method | T: Tape packaging, P: Bulk packaging (PE bag) |
Product Structure and Dimensions:
| No. | Name |
|---|---|
| Ceramic Dielectric | |
| Internal Electrode | |
| External Electrode | |
| Nickel Layer | |
| Tin Layer |
Product Dimensions:
| Model | Dimensions (mm) | Inch Representation | Metric Representation | L | W | T | WB |
|---|---|---|---|---|---|---|---|
| 1206 | 3216 | 0.12*0.06 | 3.200.20 | 1.600.20 | 1.250.20 | 0.30-0.8 |
Specifications and Test Methods:
| No. | Item | Specification | Test Method |
|---|---|---|---|
| 1 | Operating Temperature Range | -55~+85 | |
| 2 | Appearance and Dimensions | No visible damage to appearance. Dimensions meet specification requirements. | Visual inspection of appearance. Dimensions measured with vernier calipers. |
| 3 | Capacitance | Within specified tolerance | Nominal Capacitance: 10uF: 1KHz10%, 1.00.2Vrms; >10uF: 120Hz24, 0.50.1Vrms |
| 4 | Dissipation Factor (DF Value) | <0.1% | Cr10uF, measured at 110%KHz, 1V0.1rms. Cr10uF, measured at 12024Hz, 0.5V0.1rms. |
| 5 | Insulation Resistance | >1 G | Test Voltage: 250V, Test Time: 605 seconds, Test Humidity: 70%, Test Temperature: 255 |
| 6 | Dielectric Strength (DC) | No dielectric breakdown or damage | Test Voltage: Rated voltage, Test Time: 2 seconds |
| 7 | Solderability | Tinning rate >95%, pinholes or rough area <5%, no visible damage to appearance. | Preheat capacitor at 80-120 for 10-30 seconds. Lead-free solder, flux used. Soldering temperature: 2455, immersion time 21 seconds. |
| 8 | Solder Heat Resistance | Appearance: No visible damage, tinning rate 95% | Preheating: 120~150/60 seconds. Solder pot temperature: 2705. Immersion time: 101 seconds. Both end electrodes fully immersed in solder pot. Rinse with solvent. Room temperature storage for 242 hours. Capacitance change rate: -2.5% < C/C 2.5%. DF value: Same as NO4. IR: Same as NO5. |
| 9 | Bending Strength | No visible damage to appearance. | Test substrate: Al2O3 or PCB. PCB dimensions: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Bending depth: 1mm. Pressing speed: 1mm/sec. Measurements taken under bent state. Capacitance change rate: C/C5%. |
| 10 | Terminal Bond Strength | No visible damage to appearance. | |
| 11 | Temperature Cycling | C/C2.5% | Pre-treatment: Upper temperature 1 hour, store for 241 hours, initial measurement. Perform 5 temperature cycles. Store at room temperature and humidity for 242 hours before testing. Steps: -55+0/-3 (30 min), 25 (2-3 min), +85+3/-0 (30 min), 25 (2-3 min). |
| 12 | Damp Heat Resistance | No visible damage to appearance. | Temperature: 402, Humidity: 90~95%RH, Time: 50024 hours. After test, store at room temperature and humidity for 24 hours before testing. Capacitance change rate: C/C5%. DF value: 2 times initial standard. IR: >500M. |
| 13 | High-Temperature Load Test | No visible damage to appearance. | Temperature: 85, Time: 100048 hours, Voltage: 1.5 times rated voltage (100VV250V). After test, store at room temperature and humidity for 242 hours before testing. Capacitance change rate: C/C5%. DF value: 2 times initial standard. IR: >500M. |
Note: Initial measurement for NO3, 11, 12, 13: Preheat at 150 for 1 hour, then store at room temperature and atmospheric pressure for 48 hours before testing.
Packaging Information:
| Code | Specification | Tape Packaging (Pcs) |
|---|---|---|
| 1206 | T1.35mm | 3000 |
| 1206 | T1.35mm | 2000 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification:
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!