Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 6.3V |
| Capacitance | 10uF |
| Temperature Coefficient | X6S |
| Tolerance | ±20% |
| Description | 6.3V 10uF X6S ±20% 0603 Ceramic Capacitors RoHS |
| Mfr. Part # | 0603X6S106M6R3NT |
| Package | 0603 |
| Model Number | 0603X6S106M6R3NT |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Voltage Rating | 6.3V | Capacitance | 10uF |
| Temperature Coefficient | X6S | Tolerance | ±20% |
| Description | 6.3V 10uF X6S ±20% 0603 Ceramic Capacitors RoHS | Mfr. Part # | 0603X6S106M6R3NT |
| Package | 0603 | Model Number | 0603X6S106M6R3NT |
This specification sheet details the 0603(X6S) chip ceramic capacitor (MLCC) designed for high-voltage electronic circuits. It is suitable for applications such as coupling, filtering, and resonance in devices including switching power supplies, AC-DC and DC-DC converters, network/communication interfaces, LCD module backlight power supplies, and energy-saving lamp ballasts. The capacitors are manufactured with a layered ceramic dielectric and internal electrodes, protected by outer electrodes, a nickel layer, and a tin layer.
| Item | Specification | Test Method |
|---|---|---|
| Product Size Code | 0603 | L*W (inch): 0.06*0.03; L*W (mm): 1.60*0.80 |
| Nominal Capacitance (Example) | 105 | 1 (three-digit method, unit: F) |
| Capacitance Tolerance (Example) | K | 10% |
| Rated Voltage (DC) (Example) | 160 | 160V (160 - 16, 101-100V, 102-1000V using three-digit method) |
| Packaging Method (Example) | T | Tape packaging |
| Product Structure | 1. Ceramic Dielectric 2. Internal Electrode 3. Outer Electrode 4. Nickel Layer 5. Tin Layer | Visual inspection |
| Product Dimensions (0603) | L: 1.600.15 mm, W: 0.800.15 mm, T: 0.800.15 mm, WB: 0.300.10 mm | Vernier caliper measurement |
| Operating Temperature Range | -55~+105 | Visual inspection, Vernier caliper measurement |
| Capacitance Measurement (X6S) | 10uF: 1KHz10%, 1.00.2Vrms >10uF: 120Hz24Hz, 0.50.1Vrms | Refer to specification |
| Dissipation Factor (DF) (X6S) | See Note 1 | Refer to specification |
| Insulation Resistance (X6S) | IR 10000M, C 25nF IR*Cr 100S, C > 25nF | Test voltage: 500V or rated voltage (whichever is lower), 605 sec test time, 75% humidity, 255 test temperature |
| Dielectric Withstanding Voltage (DC) | 2.0 times rated voltage (for Ur=200V/250V) | 1-10S voltage rise time, 2S holding time |
| Solderability | Tinning rate > 90%, no visible damage | Preheat 80-120 for 10-30 sec, lead-free solder, flux. Solder temp: 2455, solder time: 20.5 sec. |
| Solder Heat Resistance | No visible damage, tinning rate 90% | Preheat 100-200 for 102 sec, dip solder temp: 2605, dip time: 51 sec. Clean with solvent. Store at room temp for 242 hours. |
| Capacitance Change Rate (Solder Heat Resistance) (X6S) | |C/C| 22% | Refer to specification |
| Bending Strength | No visible damage | Test substrate: Al2O3 or PCB. Bending depth: 1mm. Pressing speed: 0.5mm/sec. Measurement during bending. |
| Capacitance Change Rate (Bending Strength) | |C/C| 10% | Refer to specification |
| Terminal Pull Strength | No visible damage | Refer to specification |
| Temperature Cycling (X6S) | |C/C| 10% | 5 cycles of temperature change. Pre-condition: upper temp 1 hour, rest 241 hour. Test after 242 hours at room temp/humidity. |
| Damp Heat Resistance (X6S) | |C/C| 10% | Test at 402, 90-95%RH for 50024 hours. Test after 24 hours at room temp/humidity. |
| High Temperature Load Test (X6S) | |C/C| 20% | Test at 853 for 100048 hours. Applied voltage based on rated voltage. |
| Tape Packaging (0603) | 4000 Pcs | Refer to packaging diagrams |
| Tape Packaging (0805) | 3000 Pcs (T1.35mm) | Refer to packaging diagrams |
| Tape Packaging (1206) | 3000 Pcs (T>1.35mm) | Refer to packaging diagrams |
Note 1: DF specifications for X7R/X5R/X6S/X7S/Y5V characteristics vary by rated voltage and capacitance. Refer to the detailed table in the original document for specific values.
Note 2: Initial measurement for capacitance in items 3, 11, 12, and 13 requires preheating at 150 for 1 hour, followed by 48 hours at room temperature and pressure.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!