Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 250V |
| Capacitance | 33pF |
| Temperature Coefficient | C0G |
| Tolerance | ±5% |
| Description | 250V 33pF C0G ±5% 0805 Ceramic Capacitors RoHS |
| Mfr. Part # | 0805C0G330J251NT |
| Package | 0805 |
| Model Number | 0805C0G330J251NT |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Voltage Rating | 250V | Capacitance | 33pF |
| Temperature Coefficient | C0G | Tolerance | ±5% |
| Description | 250V 33pF C0G ±5% 0805 Ceramic Capacitors RoHS | Mfr. Part # | 0805C0G330J251NT |
| Package | 0805 | Model Number | 0805C0G330J251NT |
Medium and High voltage MLCCs designed for coupling, wave filtering, and resonant applications in high voltage circuits. Suitable for switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps.
| Item | Specification/Requirement | Testing Method |
|---|---|---|
| Temperature Characteristic | C0G (0±30 PPM/°C), X7R (±15%), X5R (±15%) | |
| Nominal Electrostatic Capacity | 8R0=8.0pF, 100=10pF, 101=100pF | |
| Tolerance of Electrostatic Capacity | B:±0.1pF, C:±0.25pF, D:±0.5pF, F:±1%, G: ±2%, J: ±5%, K: ±10%, M: ±20%, Z:+80%/-20% | |
| Rated Voltage (DC) | 250V, 251=250V, 252=2500V | |
| Temperature Range | -55~+125°C | |
| Static Capacity (NPO) | ≤1000pF: 1MHz±10%, 1.0±0.2Vrms >1000pF: 1KHz±10%, 1.0±0.2Vrms | |
| Static Capacity (X7R/X7T/X7P) | ≤10uF: 1KHz±10%, 1.0±0.2Vrms >10uF: 120Hz±24, 0.5±0.1Vrms | |
| Dissipation Factor (DF) (NPO) | DF≤0.56 (Cr<5pF) DF≤1.5[(150/Cr)+7]×10-4 (5pF≤Cr<50pF) DF≤0.15% (50pF≤Cr) | Cr≤1000pF, 1±10%MHz, 1V±0.2rms Cr>1000pF, 1±10%KHz, 1V±0.2rms |
| Dissipation Factor (DF) (X7R/X7T/X7P) | See Note 1 | Cr≤10uF, 1±10%KHz, 1V±0.1rms Cr>10uF, 120±24Hz, 0.5V±0.1rms |
| Insulation Resistance (IR) (NPO) | IR≥50000MΩ, C≤10nF IR*Cr≥500S, C>10nF | Rated voltage, Time:60±5s, Humidity:≤75%, Temp:25±5°C, Current:≤50mA |
| Insulation Resistance (IR) (X7R/X7T/X7P) | IR≥10000MΩ, C≤25nF IR*Cr≥100S, C>25nF | Rated voltage, Time:60±5s, Humidity:≤75%, Temp:25±5°C, Current:≤50mA |
| Hi-pot (DC) | No dielectric breakdown or damage | Voltage Raising time:110S, Voltage maintaining time2S |
| Solderability | Soldering area≥90% | Pre-heating 80-120, 10-30s; Solder temp 245±5, Solder time 2±0.5s |
| Resistance to the heat of soldering | No damage, soldering area≥90% | Pre-heating 100-200, 10±2s; Solder temp 265±5, Solder time 5±1s |
| Electrostatic Capacity Change Rate (after Soldering) | NPO: ¦ΔC/C¦≤0.5% or ±0.5pF X7R: ¦ΔC/C¦≤15% X7T: -33% ≤ΔC/C≤22% X7P: ¦ΔC/C¦≤10% | Pre-heating 150 1hour, then place 48hours under normal pressure & temperature. |
| Flexural Strength | No damage | Base board: Al2O3 /PCB, PCB thickness: 1.6mm, Length: 100mm, Width: 40mm, Flexural depth: 1mm, Bend speed: 0.5mm/sec. |
| Electro static capacity change rate (Flexural) | ¦ΔC/C¦≤10% | Test it under the flexural status. |
| Terminal bonding strength | No visual damage | Applied Force: 5N, Duration: 10±1S |
| Thermal Shock | NPO: ¦ΔC/C¦≤2.5% or 0.25pF X7R/X7P: ¦ΔC/C¦≤0.5% X7T: ¦ΔC/C¦≤10% | Pre-condition(X7R h characteristic):Upper limit temp 1hour, place 24±1 hours. Run 5 cycles. Test after place 24±2 hours normal temp & humidity. |
| Temperature Moisture Exposure | Visual: No visual damage Capacity Change Rate: NPO: ¦ΔC/C¦≤2% or 1pF X7R/X7T/X7P: ¦ΔC/C¦≤10% DF: ≤2 times initial standard IR: NPO: IR≥2500MΩ or IR*Cr≥25S X7R/X7T/X7P: IR≥1000MΩ or IR*Cr≥25S | Temp: 40±2°C, Humidity: 90~95%RH, Time: 500±+24 hours. Test after place 24±2 hours normal temp & humidity. |
| High Temperature Exposure | Visual: No visual damage Capacity Change Rate: NPO: ¦ΔC/C¦≤2% or 1pF X7R/X7T/X7P: ¦ΔC/C¦≤20% DF: ≤2 X initial standard IR: NPO: IR≥4000MΩ or IR*Cr≥40S X7R/X7T/X7P: IR≥2000MΩ or IR*Cr≥50S | Temp: 125±3°C, Time: 1000±48 hours. Voltage: 100V≤V≤250V (2x Rated voltage), 250V<V<1KV (1.5x rated voltage), 1KV≤V (1.2x rated voltage). Test after place 48 hours under normal pressure & temperature. |
| PCB Flexural Strength | No crack and other defect | Soldering the MLCC on the PCB, then pressing direction based on the photo. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!