Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 100V |
| Capacitance | 2.2uF |
| Temperature Coefficient | X7R |
| Tolerance | ±10% |
| Description | 2.2uF ±10% 100V Ceramic Capacitor X7R 1210 |
| Mfr. Part # | TCC1210X7R225K101MT |
| Package | 1210 |
| Model Number | TCC1210X7R225K101MT |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Voltage Rating | 100V | Capacitance | 2.2uF |
| Temperature Coefficient | X7R | Tolerance | ±10% |
| Description | 2.2uF ±10% 100V Ceramic Capacitor X7R 1210 | Mfr. Part # | TCC1210X7R225K101MT |
| Package | 1210 | Model Number | TCC1210X7R225K101MT |
This document specifies the requirements for Multilayer Chip Ceramic Capacitors (MLCCs), specifically the TCC1210X7R225K101MT model. These capacitors are designed for general-purpose applications requiring stable temperature characteristics and a wide operating temperature range. They are suitable for circuits such as DC-blocking, decoupling, bypassing, and frequency discriminating.
| Specification | Dielectric | Technical Requirement | Testing Condition |
|---|---|---|---|
| Appearance | X7R | Visual inspection | - |
| Dimensions | X7R | Within the specified dimensions | Using calipers on micrometer (l1/8L, w1/8W, t1/8T) |
| Capacitance | X7R | Within the specified tolerance | 1.00.2Vrms, 1KHz10% (253, <70%RH, after 150 heat treatment for 1 hour and 48 hours rest) |
| Dissipation Factor | X7R | DF10% | 1.00.2Vrms, 1KHz10% (253, <70%RH, after 150 heat treatment for 1 hour and 48 hours rest) |
| Insulation Resistance | X7R | 45.45M | Test voltage: 100V; Charge time: 605 sec; Temperature: 25 |
| Dielectric Strength | X7R | UR=100V | Apply 200VDC for 5 seconds. Max. current should not exceed 50 mA. |
| Temperature Coefficient of Capacitance | X7R | Capacitance change within 15% | Sequence test at -55, 25, 125 (253, <70%RH, after 150 heat treatment for 1 hour and 48 hours rest) |
| Adhesion | X7R | No removal of the terminations or other defect shall occur. | Pressurizing force: 6N, duration: 101 sec |
| Solderability of Termination | X7R | 95% min-coverage of both terminal electrodes and less than 5% have pin holes or rough spots. | Solder temperature: 2455, Dipping time: 21 seconds. |
| Resistance to leaching | X7R | 95% min. coverage of both terminal electrodes and less than 5% have pin holes or rough spots. No remarkable visual damage. | Preheated: 120~150/60sec, Solder temperature: 2705, Dipping time: 101 seconds. |
| Bending | X7R | No remarkable visual damage; Cp change 10%. | Install capacitor on substrate, apply pressure at 1.0mm/s to bend 1mm. |
| Resistance to Soldering Heat | X7R | No remarkable visual damage, Cp change within 7.5%. DF and IR meets initial standard value. | Preheating: 120~150 60sec. Soldering temperature: 2705. Dipping time: 101 seconds. (Measurement after 484 hours at room temperature, with initial measurement for high dielectric constant type after 140~150 heat treatment for 1hr and 484hrs rest). |
| Temperature Cycle | X7R | No remarkable visual damage. Cp change within 7.5%. | 5 cycles: -55 (30min), 25 (2-3min), 125 (30min), 25 (2-3min). (Measurement after 484 hours at room temperature, with initial measurement for high dielectric constant type after 140~150 heat treatment for 1hr and 484hrs rest). |
| Moisture Resistance, steady state | X7R | No obvious visual damage, Cp change within 12.5%. DF: Not more than 2 times of initial value. IR4.55M. | Test temperature: 402, Humidity: 90~95% RH, Testing time: 500 12hrs. (Measurement after 484 hours at room temperature, with initial measurement for high dielectric constant type after 140~150 heat treatment for 1hr and 484hrs rest). |
| Damp heat with load | X7R | No remarkable visual damage, Cp change12.5%. DF: Not more than 2 times of initial value. IR2.27M. | Test temperature: 402, Humidity: 90~95% RH, Voltage: 100% of rated voltage, Charge/discharge current: 50mA, Testing time: 500 12hrs. (Measurement after soldering and 484 hours at room temperature, then after 150 for 1h and 48h rest). |
| Life Test | X7R | No remarkable visual damage. Cp change12.5%. DF: Not more than 2 times of initial value. IR2.27M. | Test temperature: Max. Operating Temp. 3, Voltage: 100% of rated voltage, Charge/discharge current: 50mA, Testing time: 1000 hrs. (Measurement after soldering and 484 hours at room temperature, then after 150 for 1h and 48h rest). |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!