Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 20kV |
| Capacitance | 220pF |
| Body Thickness | 11mm |
| Tolerance | ±10% |
| Pin Spacing | 10mm |
| Description | 20kV 220pF ±10% Through Hole,P=10mm Ceramic Capacitors RoHS |
| Mfr. Part # | HVC-20KV-DL13-F10-221K |
| Package | Through Hole,P=10mm |
| Model Number | HVC-20KV-DL13-F10-221K |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Voltage Rating | 20kV | Capacitance | 220pF |
| Body Thickness | 11mm | Tolerance | ±10% |
| Pin Spacing | 10mm | Description | 20kV 220pF ±10% Through Hole,P=10mm Ceramic Capacitors RoHS |
| Mfr. Part # | HVC-20KV-DL13-F10-221K | Package | Through Hole,P=10mm |
| Model Number | HVC-20KV-DL13-F10-221K |
This specification applies to high voltage ceramic capacitors used in high voltage electric equipment. These capacitors are designed for applications requiring high reliability and are manufactured with a unique N4700 -grade ceramic dielectric material, offering high voltage capabilities from 2KV to 50KV. They are particularly suited for high-end medical electronic equipment, airport security, non-destructive testing, and electrostatic dust removal equipment.
| Part Number | DC Rated Voltage (kV) | Capacitance (pF) | Capacitance Tolerance | Temperature Characteristic | Dimensions (mm) D x T x F | Lead Style | Packing Type |
| HVC-20KV-DL13-F10-221K | 20KV | 220 pF | K (10%) | N4700 (-4700ppm/C) | DL13 (D=11mm, T=13mm, F=10mm) | Straight long | Bulk |
Operating Voltage: Maintain applied voltage (DC, AC, or ripple) within the rated voltage range. Account for transient voltages during circuit start-up or shut-down.
Operating Temperature and Self-Generated Heat: Keep surface temperature below the rated operating temperature. Consider self-generated heat due to dielectric loss, especially in high-frequency or pulse current applications. Applied voltage should limit self-generated heat to within 5C at 25C ambient temperature.
Operating and Storage Environment: Avoid corrosive atmospheres (chloride gas, sulfide gas, acid, alkali, salt) and moisture. Ensure at least 3mm of insulating media around the capacitor. Storage temperature: -10 to 40C; Relative humidity: 15 to 85%. Use within 6 months of delivery.
Vibration and Impact: Do not expose to excessive shock or vibration.
Soldering: Adhere to solder heat resistance specifications. Soldering iron tip: 400C max. Wattage: 50W max. Time: 3.5s max. Failure to comply may result in short circuits or product damage.
Limitation of Applications: Contact HVC before using in applications requiring exceptionally high reliability, such as aircraft, aerospace, medical, transportation, and power plant control equipment.
Cleaning: For ultrasonic cleaning, use a rinse bath capacity of 20 watts/liter or less for a maximum of 5 minutes. Do not vibrate the PCB/PWB directly.
Capacitance Change: Class 1 capacitors may show slight capacitance changes with temperature or voltage. Class 2 and 3 capacitors (e.g., B, E, F temperature characteristics) exhibit aging and significant changes with temperature and voltage, making them unsuitable for strict time constant circuits.
| Category | Item | Specification | Testing Method |
| Visual Examination | Appearance dimensions | See 3, 4 | Visually examined or Venire Calipers |
| Marking | To be easily legible | Visually examined | |
| Electrical Performance Tests | Dielectric Strength (Between Lead wires) | No failure | DC voltage of 150% of rated voltage applied for 60 s in insulating liquid or gas (Charge/discharge current: 50mA max.) |
| Body Insulation | No failure | DC voltage of 15kV applied for 10 s between lead wires and small metals (Charge/discharge current: 50mA max.) | |
| Insulation Resistance (I.R.) | W min. (200,000 M) | DC 1kV measured within 605 s of charging | |
| Capacitance | Within specified tolerance | Measured at 20C, 10.2kHz, AC5V(r.m.s.) max. | |
| Dissipation Factor (D.F.) | 0.2% max. | Same condition as capacitance | |
| Temperature Characteristic | Capacitance change from value at 20C shall not exceed limits specified in table. | Measurements at -4700ppm/C, 202C, 852C. | |
| Mechanical Performance Tests | Strength of Lead Pull | Lead wire shall not cut off. Capacitor shall not be broken. | Tensile weight of 10N applied radially to lead wire for 101 s. |
| Bending | Each lead wire shall be subjected to 5N weight and 90 bends in opposite directions. | Rate of one bend in 2 to 3 s. | |
| Solderability of Leads | Lead wire shall be soldered with uniformly coated over 3/4 of circumferential direction. | Dipped in 25% methanol solution of rosin, then into molten solder of 2355C for 20.5 s. Dipping depth: 1.5 to 2.0mm from root of lead wires. | |
| Soldering Effect | Appearance: No marked defect. Capacitance Change: Within 10%. Dielectric Strength (Between lead wires): No failure. | Lead wires immersed into melted solder of 35010C up to 1.5 to 2.0mm from main body for 3.50.5 s. Stored for 242 h at room condition post-treatment. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
.gtr-container-9k2l8p { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; box-sizing: border-box; max-width: 100%; } .gtr-container-9k2l8p-header { margin-bottom: 20px;... .gtr-container-9k2l8p { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; box-sizing: border-box; max-width: 100%; } .gtr-container-9k2l8p-header { margin-bottom: 20px;...
Get in touch with us
Leave a Message, we will call you back quickly!