Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 25V |
| Capacitance | 4.7uF |
| Temperature Coefficient | X5R |
| Tolerance | ±10% |
| Description | 4.7uF ±10% 25V Ceramic Capacitor X5R 0603 |
| Mfr. Part # | CGA0603X5R475K250JT |
| Package | 0603 |
| Model Number | CGA0603X5R475K250JT |
View Detail Information
Explore similar products
Ceramic capacitor AIDE CAPACITOR 1210X7R476K100NT designed for switch power
ceramic capacitor AIDE CAPACITOR 0603X7R105K100NT for energy saving lamps and
Multi Layer Ceramic Capacitors with CCTC TCC0603X5R105K500CT Specification and
Surface mount multilayer ceramic capacitors Chinocera HHV0805R7102K201NTHJ with
Product Specification
| Voltage Rating | 25V | Capacitance | 4.7uF |
| Temperature Coefficient | X5R | Tolerance | ±10% |
| Description | 4.7uF ±10% 25V Ceramic Capacitor X5R 0603 | Mfr. Part # | CGA0603X5R475K250JT |
| Package | 0603 | Model Number | CGA0603X5R475K250JT |
The CGA0603X5R475K250JT is a multilayer ceramic capacitor (MLCC) with an X5R dielectric. It offers a capacitance of 4.7F and a rated voltage of 25Vdc. Designed for surface mounting, this component is suitable for a wide range of electronic applications requiring stable capacitance over a moderate temperature range.
| Part Number | Size (mm) | Capacitance | Capacitance Tolerance | Rated Voltage | Temperature Characteristic | Temperature Range | Capacitance Change Rate | Packaging | Packaging Quantity |
| CGA0603X5R475K250JT | 1.600.20 x 0.800.20 x 0.800.20 | 4.7F | 10% | 25Vdc | X5R | -55~+85 | 15% | T (180mm Reel) | 4,000 |
| Test Item | Test Specification | Test Method (Reference Standard: JIS C 5101, IEC60384) |
| Appearance | No defects or abnormalities. | Visual (Microscope) inspection of the product. |
| Dimension | Conforms to specifications. | Check the physical dimensions of the equipment using a micrometer. |
| Voltage Proof | Withstand test voltage, no defects or abnormalities. | Material: X7R/X5R. Rated Voltage (RV) 50V: Test Voltage 250% RV. Test Time: 1 to 5 seconds. Max Charging/Discharging Current: 50mA. |
| Insulation Resistance (I.R.) | 100M | Test Temperature: 25. Test Points: Between terminals. Test Voltage: 500V: Rated Voltage; >500V: 500V. Charging Time: 1 minute. Max Charging/Discharging Current: 50mA. |
| Capacitance | Within specified tolerance. | Measurement Temperature: 25. Material: X5R. Capacitance: 4.7F. Frequency: 120Hz24Hz. Voltage: 0.5V0.1Vrms. |
| Q Factor / Dissipation Factor (D.F.) | C > 10F: 5.0% | Measurement Temperature: 25. Frequency: 120Hz24Hz. Voltage: 0.5V0.1Vrms. |
| Temperature Characteristics of Capacitance | X5R: 15% | Steps: 1. Reference Temp: 252; 2. Lowest Operating Temp: 3; 3. Reference Temp: 252; 4. Highest Operating Temp: 2; 5. Reference Temp: 252. Measurement should be taken after 5 minutes at each specified temperature stage. |
| Adhesive Strength of Termination | No termination peeling, ceramic breakage, etc. | Mounting Method: Solder capacitor onto test substrate. Force: 5 N (0402: 2.5 N / 0201: 1 N). Application Direction: Gradually apply thrust in the horizontal direction of the P.C. board at the center of the specimen. Time: 101 seconds. |
| Substrate Bending Test | Appearance: No defects or abnormalities. C/C | Mounting Method: Reflow solder capacitor on P.C. board, then bend by 1 mm. |
| Solderability | 95% of terminals should be uniformly and continuously soldered. | Solder: Sn-3.0Ag-0.5Cu (Lead-free solder). Flux: Isopropyl alcohol Rosin 25% solid solution. Soldering Temperature: 2455C. Dwell Time: 20.5s. Soldering Position: Until both ends are completely wetted. |
| Resistance to Soldering Heat | Appearance: No cracks. Capacitance Change: X7R/X5R 7.5%. Q/DF: Same as initial value. Insulation Resistance: Same as initial value. Voltage Proof: No defects or abnormalities. | Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then stand at room temperature for 242 hours. Solder bath method. Solder Type: Sn-3.0Ag-0.5Cu. Test Temperature: 2605C. Test Time: 101s. Preheating Temp: 110 to 140. Preheating Time: 1 minute. Post-treatment: Stand at room temperature for 242 hours. |
| Temperature Cycle | Appearance: No defects or abnormalities. Capacitance Change: X7R/X5R 7.5%. Q/DF: Same as initial value. Insulation Resistance: Same as initial value. | Mounting Method: Solder capacitor onto test substrate. Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then stand at room temperature for 242 hours. Temperature Cycle: 5 cycles. Steps: 1. Min Temp 3 (303 min); 2. Room Temp (2~5 min); 3. Max Temp 3 (303 min); 4. Room Temp (2~5 min). Post-treatment: Stand at room temperature for 242 hours. |
| High Temperature High Humidity (Load) | Appearance: No defects or abnormalities. Capacitance Change: X5R/X7R 12.5%. Q/DF: 16V: 7% or 2x initial value; 25V: 5% or 2x initial value (whichever is greater). Insulation Resistance: 500M or R.C5s (whichever is smaller). | Mounting Method: Reflow solder capacitor on P.C. board. Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then stand at room temperature for 242 hours. Test Temperature: 402. Test Humidity: 90%RH to 95%RH. Test Time: 50024 hours. Test Voltage: Rated voltage (not exceeding 630V). Voltage Conditioning: Apply voltage for 1 hour at test temp/voltage, then condition at ambient for 242 hours before measurement. |
| Life Test | Appearance: No defects or abnormalities. Capacitance Change: X5R/X7R 12.5%. Q/DF: 16V: 7% or 2x initial value; 25V: 5% or 2x initial value (whichever is greater). Insulation Resistance: X5R/X7R: 1G or R.C50s (whichever is smaller). | Mounting Method: Solder capacitor onto test substrate. Pre-treatment: Heat treatment at 150+0/-10C for 1 hour, then stand at room temperature for 242 hours. Test Temperature: Max operating temp 3. Test Time: 100012 hours. Test Voltage (Life): 100% R.V. Voltage Conditioning: Apply voltage for 1 hour at test temp/voltage, then condition at ambient for 242 hours before measurement. |
| Size (mm) | Reel Size | Quantity per Reel | Tape Type |
| 0603 | 7" | 4,000 | Paper Tape |
| Reel Diameter | Reel Width | Hub Diameter | Flange Diameter | Hub Width | Flange Width |
| 1782.0 | 2.0 0.5 | 13 1.0 | 210.8 | 50 or larger | 101.0 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!